Laptop Build Abbreviated Checklist - Revision history

Kevin.Williams: Ryan Dodd told me today this article is not needed on google docs and to remove the migrate flag.

2014-08-08T22:41:40Z

Ryan Dodd told me today this article is not needed on google docs and to remove the migrate flag.

Bkoenig at 22:40, 13 May 2014

2014-05-13T22:40:23Z

Bkoenig at 22:35, 13 May 2014

2014-05-13T22:35:08Z

AshleySueMas at 00:29, 7 April 2014

2014-04-07T00:29:11Z

Aradan: /* 16. Next Steps */

2013-09-17T20:29:53Z

16. Next Steps

Aradan: /* 16. Next Steps */

2013-09-17T20:29:29Z

16. Next Steps

Aradan: /* 9. Run audio tests and stress-test */

2013-07-17T01:32:15Z

9. Run audio tests and stress-test

Aradan at 01:15, 17 July 2013

2013-07-17T01:15:42Z

Aradan: /* 15. Next steps */

2013-07-16T20:35:49Z

15. Next steps

Aradan: /* 3. Check for an imaged hard drive */

2013-05-14T20:19:27Z

3. Check for an imaged hard drive

← Older revision		Revision as of 22:41, 8 August 2014
Line 1:		Line 1:
−	~~{{Migrate}}~~	+

	__NOTOC__		__NOTOC__

← Older revision		Revision as of 22:40, 13 May 2014
Line 1:		Line 1:
−		+	{{Migrate}}

	__NOTOC__		__NOTOC__

← Older revision		Revision as of 22:35, 13 May 2014
Line 1:		Line 1:
−	~~{{Migrate}}~~	+

	__NOTOC__		__NOTOC__

← Older revision		Revision as of 00:29, 7 April 2014
Line 1:		Line 1:
		+	{{Migrate}}
		+
	__NOTOC__		__NOTOC__
	*This is a brief guide for experienced builders.		*This is a brief guide for experienced builders.

@@ Line 59: / Line 59: @@
 ----
 ===16. Next Steps===
-&#9744; Set the appropriate GUI settings for <code>batterytest</code> in '''Menu &rarr; Settings &rarr; Power Management'''. <br>
+&#9744; Set the appropriate GUI settings for <code>batterytest</code> in '''Menu &rarr; Settings &rarr; Settings Manager &rarr; Power Management'''. <br>
 &#9744; Review the Keeper Label, and start any needed tests.
 ----
 [[Category:Laptops]]

@@ Line 31: / Line 31: @@
 ----
 ===9. Run audio tests and <code>stress-test</code>===
-*For audio, be sure to test both internal speakers and headphone (1/8") jack.
+&#9744; For audio, open a Terminal and type <code>speaker-test -t wav -c2 -l1</code>
 ----
 ===10. Confirm installed RAM===
 &#9744; Open a Terminal and type <code>free -m</code> <br>

@@ Line 7: / Line 7: @@
 &#9744; Replace needed parts, repair damages where possible, note cosmetic damage on the Keeper label.
 ----
-===2. Verify Keeper lable information===
+===2. Verify Keeper label information===
 &#9744; Fill out the top sections of the Keeper label.
 ----
-===3. Check for an imaged hard drive===
+===3. Check for imaged hard drive===
-&#9744; Install a drive as needed, according to [[Laptop Specs]] ('''A-6''').
+&#9744; Install a hard drive as needed, according to [[Laptop Specs]] ('''A-6''').
 ----
+===4. Check Optical Drive hardware===
 &#9744; Make sure the laptop has a CD/DVD-ROM or CD/DVD-RW drive installed.
 *Note the drive on the Keeper label as well.
@@ Line 28: / Line 27: @@
 &#9744; Use the Keyboard and Mouse testing software on the network boot menu.
 *Be sure to test all trackpad inputs.
 ===8. Boot into Xubuntu 12.04===
 ----
-===9. Run <code>basiccheck</code> and <code>stress-test</code>===
+===9. Run audio tests and <code>stress-test</code>===
 *For audio, be sure to test both internal speakers and headphone (1/8") jack.
 ----
-===10. Configure networking===
+===10. Confirm installed RAM===
 &#9744; Confirm internet access via LAN port by browsing to a website.<br>
 &#9744; Confirm wireless works by browsing to a website.
 ----
-===11. Install restricted extras and check for proprietary drivers===
+===12. Install restricted extras and check for proprietary drivers===
 &#9744; Run Restricted Extras & DVD Codec installer.<br>
 &#9744; Check for Additional Hardware drivers. Ask your instructor before installing proprietary drivers.
 ----
-===12. Test optical drive===
+===13. Test Optical Drive===
 &#9744; Verify that the optical drive can read CD and DVD media.
 *Disk burning testing has been removed from laptop build for the time being.
 ----
-===13. Test USB ports===
+===14. Test USB ports===
 ----
-===14. Run <code>printme</code>===
+===15. Run <code>printme</code>===
 &#9744; Make sure your instructor signs off on the digital copy.<br>
 &#9744; Print a copy of the Printme to the Desktop.
 ----
-===15. Next steps===
+===16. Next Steps===
 &#9744; Set the appropriate GUI settings for <code>batterytest</code> in Menu >> Settings >> '''Power Management'''. <br>
 &#9744; Review the Keeper label, and start any needed tests.