Mkille at 21:05, 14 May 2013

2013-05-14T21:05:39Z

Jeff at 00:03, 21 September 2005

2005-09-21T00:03:08Z

Show changes

Jeff at 00:02, 21 September 2005

2005-09-21T00:02:09Z

Jeff at 00:01, 21 September 2005

2005-09-21T00:01:45Z

New page

#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;

default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

subnet 10.10.1.0 netmask 255.255.255.0 {
range dynamic-bootp 10.10.1.200 10.10.1.254;
default-lease-time 600;
max-lease-time 7200;
option subnet-mask 255.255.255.0;
option broadcast-address 10.10.1.255;
option routers 10.10.1.254;
option domain-name-servers 10.10.1.254;
# option domain-name "somelan";
# next-server is only needed if the dhcp and nfs servers are different machines
#next-server 192.168.1.9;
# tftp-server-name is needed in addition to (instead of?) next-server when using
# the kernel initrd method. for some reason dhclient won't grab next-server...
#option tftp-server-name 192.168.1.9;
filename "/var/lib/lessdisks/boot/vmlinuz.nb";
option root-path "/var/lib/lessdisks/";

# these are options to allow for boot menus with etherboot
# option-128 must be reproduced exactly- it is not a mac address
#option option-128 e4:45:74:68:00:00;
#option option-160 "timeout=10:default=193";
#option option-184 "/etc/motd";
#option option-192 "oldkernel:::/var/lib/lessdisks/boot/bzimage.ramfs.nb:::=old";
#option option-193 "newkernel:::/var/lib/lessdisks/boot/vmlinuz-2.4.16ld.nb:::=new";

#group {
# options for terminals that use network-bootable grub

#filename "/var/lib/lessdisks/boot/grub/nbgrub";
# default grub menu
#option option-150 "(nd)/var/lib/lessdisks/boot/grub/menu.lst";
#host foo { hardware ethernet 00:90:27:9A:53:EF; }
#host bar { hardware ethernet 00:02:b3:b7:b2:66; }
#}
#group {
# alpha terminals
# tftpd-hpa lets you specify filename relative to tftpd root path
#filename "alpha-root/boot/vmlinuz.nb";
#option root-path "/var/lib/lessdisks/alpha-root/";
#host alphaterminal { hardware ethernet 08:00:2B:E5:27:E9; }
#}
}

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}

← Older revision		Revision as of 21:05, 14 May 2013
Line 1:		Line 1:
		+	{{Delete}}
		+
	#		#
	# Sample configuration file for ISC dhcpd for Debian		# Sample configuration file for ISC dhcpd for Debian

@@ Line 1: / Line 1: @@
+#
 # Sample configuration file for ISC dhcpd for Debian
@@ Line 151: / Line 152: @@
 #  }
 #}

Overseas lessdisks dhcpdconf - Revision history

Mkille at 21:05, 14 May 2013

Jeff at 00:03, 21 September 2005

Jeff at 00:02, 21 September 2005

Jeff at 00:01, 21 September 2005