Talk:MacBuild Intel Checklist - Revision history

AshleySueMas: Blanked the page

2013-11-06T01:53:59Z

Blanked the page

Show changes

Liliana: /* HARDWARE AND SOFTWARE TESTING */

2013-03-12T18:53:54Z

HARDWARE AND SOFTWARE TESTING

Liliana at 06:23, 9 March 2013

2013-03-09T06:23:14Z

Liliana: /* BEFORE YOU POWER ON */

2013-03-09T06:10:40Z

BEFORE YOU POWER ON

Liliana at 19:23, 5 March 2013

2013-03-05T19:23:52Z

Liliana at 04:57, 5 March 2013

2013-03-05T04:57:21Z

Liliana: /* Xubuntu 12.04LTS Time! */

2013-03-01T20:26:31Z

Xubuntu 12.04LTS Time!

Liliana: /* Test the iSight camera */

2013-03-01T18:35:15Z

Test the iSight camera

Liliana at 19:04, 27 February 2013

2013-02-27T19:04:06Z

Liliana at 18:26, 27 February 2013

2013-02-27T18:26:39Z

Show changes

@@ Line 198: / Line 198: @@
 == HARDWARE AND SOFTWARE TESTING ==
 '''Boot up'''
 *Plug in both a power cable and an ethernet cord and connect a monitor, keyboard and mouse to the computer  before turning it on.  It should already have a hard drive with a Xubuntu image, so it should automatically boot into an Operating System without further instructions.  Be patient, it might take a while.
@@ Line 262: / Line 261: @@
 ** In the terminal: Open a terminal window and, when prompted, type "sudo apt-get install cheese" and press enter.  You will be asked if you want to add a program, type "Y" and press enter again.  The program will install and when it's done you should restart the computer
 ** Through the GUI: Navigate through Menu >> Ubuntu Software Center.  Enter "cheese" into the search bar and press enter. Highlight the Cheese icon and click "Install".  You will be prompted for a password; type "freegeek" and press enter.  The program will install and when it has finished, you will be prompted to restart.
-* When the computer has restarted, go to Menu >> Multimedia >> Cheese. If the iSight Camera works, you should see yourself in the window that opens up.  If not, the camera may not be properly installed or you may need to do some research to find extra drivers.
+* When the computer has restarted, go to Menu >> Multimedia >> Cheese. If the iSight Camera works, you should see yourself in the window that opens up.  If not, the camera may not be properly installed or you may need to do some research to find extra drivers.  Ask your instructor and check [[MacBuild Troubleshooting]] for more details
 ----
 '''Reboot the system'''
 * Open a terminal and type '''sudo reboot.''' Wait while it reboots, and ensure that the system powers on and offers a login screen without user intervention (e.g. requiring you to "press F1 to boot.")
 * If it doesn't boot smoothly, try "blessing" the disk. To do this, you need to boot into an OSX session by either connecting a network cable or an external HDD.  With either of these options, once you are in the Apple operating system, open a terminal window and type '''sudo bless --device /dev/disk0s1 --setBoot --legacy''', press enter.  You will be prompted for a password, enter "freegeek" (it won't show up, but it worked, I promise), and wait a moment.  It won't look like anything has happened, but it actually reduces the boot-time to get into the Xubuntu OS. Restart the computer and see what I mean.
-----
 '''Run "printme" from terminal'''
 * From a Xubuntu terminal, type "'''printme,'''" this will generate a questionnaire in Command Line.

@@ Line 203: / Line 203: @@
 ----
 '''Login to the system'''
-* username will be '''Default User''' <br> password = '''freegeek'''
+* username will be '''oem''' <br> password = '''freegeek'''
 ----
 '''Update the software'''
@@ Line 220: / Line 220: @@
 ----
 '''Run "basiccheck"'''
-* Click on the terminal icon to open it. Type "'''basiccheck'''", then press enter to begin the program. There are basiccheck checklists hanging on the supply shelves which will help with verifying whether each test passes or not. Feel free to ask your peers and the instructor what parts of basiccheck mean so that you understand what each test is checking. When you're finished, close the terminal.
+* In a terminal, type "'''basiccheck'''", then press enter to begin the program. There are basiccheck checklists hanging on the supply shelves which will help with verifying whether each test passes or not. Feel free to ask your peers and the instructor what parts of basiccheck mean so that you understand what each test is checking. When you're finished, close the terminal.
 ----
 '''Test USB'''
@@ Line 232: / Line 232: @@
 # Open the Calender, set Time Zone to '''America/Los Angeles'''
 ----
 '''Play an audio CD'''
 * Do you hear what you expect?  Is it loud enough to be heard easily? Repeat for each optical drive. Also repeat for any additional sound ports. If any sound ports (typically colored green, sometimes blue) don't play audio, cover them up with port covers or electrical tape. '''If you have functional onboard sound, and a sound card, the card will need to be removed and replaced with a slot cover.'''
@@ Line 299: / Line 304: @@
 * Open a terminal and type "sudo halt -p" then press enter. When the system has shut down, unplug all cables, double-check that the case is secured properly, and ask a build instructor where to put the system once shutdown is complete.
 <noinclude>[[Category:Macintosh]]</noinclude>
 [[Category:Macintosh]]
+<br>
-[[MacBuild Intel Checklist en Espanol | En Espanol]]
+[[MacBuild Intel Checklist en Espanol|En Espanol]]

@@ Line 196: / Line 196: @@
 '''Is the system exterior clean?'''
 * If not, use cleaner and rag to clean. The vacuum cleaner will help remove dust clogged in case fans. Hand sanitizer, Goo Gone and/or isopropyl (rubbing) alcohol can help loosen any stickers; ask your instructor where to find scraping tools to remove them.
-----
 == HARDWARE AND SOFTWARE TESTING ==
 ----

← Older revision		Revision as of 19:23, 5 March 2013
Line 183:		Line 183:

	==[[MacBuild Xubuntu QC Checklist\|Hardware Testing in Xubuntu]]==		==[[MacBuild Xubuntu QC Checklist\|Hardware Testing in Xubuntu]]==
		+
		+	== BEFORE YOU POWER ON ==
		+
		+	'''Do you see more than one video, sound, or network ports?'''
		+	* Later, when you're testing audio, headphone jacks and standard sound ports should be tested.
		+	* Orange/Black/Gray sound ports are surround sound and do not need to be tested.
		+	*Any damaged ports will need to be covered with electrical tape or port covers. If you see two identical uncovered ports, one integrated and one on a card, ask your instructor how to proceed.
		+	----
		+	'''Are there Asset tags (identifying the last owner)? Or branded hardware tags on the faceplate (identifying original components such as RAM, HDD, Optical Drive etc)?'''
		+	* If there is, take them off. '''DO NOT remove FG-PDX, "uncovered electronic device" or Processor/graphics tags.'''
		+	----
		+	'''Is the system exterior clean?'''
		+	* If not, use cleaner and rag to clean. The vacuum cleaner will help remove dust clogged in case fans. Hand sanitizer, Goo Gone and/or isopropyl (rubbing) alcohol can help loosen any stickers; ask your instructor where to find scraping tools to remove them.
		+	----
		+	'''Open up the system and check inside for:'''
		+	# Blown capacitors (If found, the system must be rejected!)
		+	# What type of DDR RAM your system has installed - write this down
		+	# The RAM speed (will be the second number on the sticker) - write this down
		+	# Any dust accumulation - please vacuum or brush it out!
		+	== HARDWARE AND SOFTWARE TESTING ==
		+	----
		+	'''Boot up'''
		+	*Plug in both a power cable and an ethernet cord and connect a monitor, keyboard and mouse to the computer before turning it on. It should already have a hard drive with a Xubuntu image, so it should automatically boot into an Operating System without further instructions. Be patient, it might take a while.
		+	----
		+	'''Login to the system'''
		+	* username will be '''Default User''' <br> password = '''freegeek'''
		+	----
		+	'''Update the software'''
		+	* Click on '''Menu''' >> '''System''' >> '''Update Manager'''. When the Update Manager pops up, click "Check" to find updates, then if any updates appear, click "Install All." It may take some time to download and install packages, so feel free to continue on with other steps while this runs in the background.
		+	----
		+	'''Activate hardware drivers'''
		+	* Click on '''Menu''' >> '''Settings''' >> '''Additional Drivers'''
		+	* Click on "Activate" button on bottom of window.
		+	* If your computer goes to a black screen with white text and freezes (Most often with early Intel iMacs), go to [[Wireless Troubleshooting Guide]] and scroll down to "Broadcom Wireless" and follow the directions to install special drivers
		+	----
		+	'''Find the terminal icon on the launcher panel at the bottom of the screen'''
		+	* Navigate to the bottom of the screen with your mouse. A launcher panel will appear, with the terminal icon '''>_''', click it to open a terminal window.
		+	----
		+	'''Stress test the system for a few minutes'''
		+	* navigate to your terminal and run "'''stress-test'''". Wait a few minutes while it runs, and look for error messages. If you want to know more about what it's doing, open up another terminal and run "man stress". This may take some time; feel free to continue on to the next step while you wait.
		+	----
		+	'''Run "basiccheck"'''
		+	* Click on the terminal icon to open it. Type "'''basiccheck'''", then press enter to begin the program. There are basiccheck checklists hanging on the supply shelves which will help with verifying whether each test passes or not. Feel free to ask your peers and the instructor what parts of basiccheck mean so that you understand what each test is checking. When you're finished, close the terminal.
		+	----
		+	'''Test USB'''
		+	* Plug in a USB mouse, see that the cursor moves and can interact with things.
		+	* Repeat with all USB ports, including ports on the front of the system, if any.
		+	----
		+	'''Check date and time'''
		+	* Displayed in the right corner of your top panel. If incorrect:
		+	# Make sure network cable is plugged in.
		+	# Navigate to '''Menu'''>>>'''Settings'''>>>'''Settings Manager'''
		+	# Open the Calender, set Time Zone to '''America/Los Angeles'''
		+	----
		+	'''Play an audio CD'''
		+	* Do you hear what you expect? Is it loud enough to be heard easily? Repeat for each optical drive. Also repeat for any additional sound ports. If any sound ports (typically colored green, sometimes blue) don't play audio, cover them up with port covers or electrical tape. '''If you have functional onboard sound, and a sound card, the card will need to be removed and replaced with a slot cover.'''
		+	* If you have surround sound ports (usually orange and gray) ignore them; we do not have the means to test this function.
		+	----
		+	'''Read data CD'''
		+	* If your file browser (listed under '''Places''' in the top panel) sees files on the drive, it can read data files. Repeat for each optical drive.
		+	----
		+	'''If you have a DVD Drive, Read DVD'''
		+	* If your file browser sees the file, the DVD-ROM can read files. If you are prompted to search for a suitable plugin or codec, '''please do not do this!''' The test still passes. Repeat for each DVD-ROM drive.
		+	----
		+	'''If you have an Optical Drive with CD-RW function, Test CD Writing'''
		+	* Insert a CD-RW disc into the drive and open XFburn (under '''Menu''' >> '''Multimedia''' >> '''XFBurn'''.) Select '''New Data Composition''', then navigate to ''' File System''' >>> '''USR''' >>> '''Share''' >>> '''Sounds''' and click '''Add'''. A new window will pop-up with a few options. If available, select '''Use burnfree''' and '''Burn the image directly without saving it to disc''' and click '''Burn'''. When the disc is done, verify that it contains the file by re-inserting the disc and seeing what pops up on the desktop.
		+	* Blank the disc using XFBurn by selecting '''Black CD-RW''' from the icons. If available, '''uncheck the "Fast Blank" option.''' If blanking does not work, the drive may still be completely functional! Ask your instructor about software bug workarounds.
		+	----
		+	'''If you have an Optical Drive with DVD-RW function, Test DVD Writing'''
		+	* Insert a DVD-RW disc into the drive and in the XFBurn file browser follow the same steps as above to burn a data project. When the disc is done, verify that it contains the file by re-inserting the disc and seeing what pops up on the desktop.
		+	* Blank the disc using XFBurn by selecting '''Blank DVD-FW''' from the icons. If available, uncheck "Fast Blank." Again, blanking errors may not indicate a bad drive. Ask your instructor for more information.
		+	----
		+	'''Remove all CDs and DVDs from the drive(s)'''
		+	----
		+	'''If the computer you're working on has an iSight Camera installed'''
		+	(Intel iMacs, MacBooks, MacBook Pros, & MacBook Airs)
		+	* Install the program "Cheese"
		+	** In the terminal: Open a terminal window and, when prompted, type "sudo apt-get install cheese" and press enter. You will be asked if you want to add a program, type "Y" and press enter again. The program will install and when it's done you should restart the computer
		+	** Through the GUI: Navigate through Menu >> Ubuntu Software Center. Enter "cheese" into the search bar and press enter. Highlight the Cheese icon and click "Install". You will be prompted for a password; type "freegeek" and press enter. The program will install and when it has finished, you will be prompted to restart.
		+	* When the computer has restarted, go to Menu >> Multimedia >> Cheese. If the iSight Camera works, you should see yourself in the window that opens up. If not, the camera may not be properly installed or you may need to do some research to find extra drivers.
		+	----
		+	'''Reboot the system'''
		+	* Open a terminal and type '''sudo reboot.''' Wait while it reboots, and ensure that the system powers on and offers a login screen without user intervention (e.g. requiring you to "press F1 to boot.")
		+	* If it doesn't boot smoothly, try "blessing" the disk. To do this, you need to boot into an OSX session by either connecting a network cable or an external HDD. With either of these options, once you are in the Apple operating system, open a terminal window and type '''sudo bless --device /dev/disk0s1 --setBoot --legacy''', press enter. You will be prompted for a password, enter "freegeek" (it won't show up, but it worked, I promise), and wait a moment. It won't look like anything has happened, but it actually reduces the boot-time to get into the Xubuntu OS. Restart the computer and see what I mean.
		+	----
		+	'''Run "printme" from terminal'''
		+	* From a Xubuntu terminal, type "'''printme,'''" this will generate a questionnaire in Command Line.
		+	* Refer to your written notes for the RAM type and speed, the BIOS key and Boot Menu key, if applicable.
		+	* When it asks what is notable about this system, enter:
		+	Intel w/ Ubuntu installed
		+	Processor type and speed
		+	Memory size and speed
		+	Wireless card info
		+	Battery test results for laptops
		+	Press enter to create a web document.
		+	----
		+	'''Copy system ID (IMPORTANT!)'''
		+	* Copy the system ID from the printme onto a blank sticker and put it on back of computer, ideally in a location that isn't covering any fans, other ventilation, or removable case parts such as slot covers.
		+	----
		+	'''Add Free Geek Sticker'''
		+	* Affix on the front of the system, in a sensible location! (Usually adjacent to or above/below the Processor tag)
		+	----
		+	'''Check in with Build Instructor'''
		+	* The Build Instructor will check the printme and edit it to sign it off.
		+	* Your instructor may ask you to replace certain components, which will require re-running the "printme" form. Some changes may also need to be made in the web browser. If your instructor gives the "thumbs-up," proceed to the next step.
		+	----
		+	'''Save Printme to the Desktop'''
		+	* After your Build Instructor has inspected the system, click "Print" in the browser that opens. Choose "Print to file." Save the file to the Desktop and name it "QC Printme", then click "Print" to save. Click on the QC Printme icon on the Desktop to open it up.
		+	----
		+	'''Enable network printers:'''
		+	* Go to '''Menu''' >> '''System''' >> '''Printing'''
		+	* Select '''Server''' >> '''Settings''' and check the box marked <i>Show Printers Shared by Other Systems</i> and click OK.
		+	* Wait for a few moments and click the refresh icon. A selection of printers should appear.
		+	----
		+	'''Print a hard copy of Printme'''
		+	* Close the "Printing - localhost" window that opens and select the "build" printer from the Print menu once it appears. Click Print and retrieve the sheet from the printer in the back (SW) corner of the room.
		+	* Have your Build Instructor sign off on the printed sheet. Then fold it in half (lengthwise) and tape it to the top of the system (the side of the page with the instructor's initials facing up.)
		+	----
		+	'''Shut down and shelve the system'''
		+	* Open a terminal and type "sudo halt -p" then press enter. When the system has shut down, unplug all cables, double-check that the case is secured properly, and ask a build instructor where to put the system once shutdown is complete.
		+
		+	\|}
		+	<noinclude>[[Category:Macintosh]]</noinclude>

@@ Line 6: / Line 6: @@
 *'''What kind of computer are you working on?''' Is it a tower, laptop, all-in-one? Does it have an Intel or PPC processor?  What's the model number printed on the bottom (if you can read it, mark it on your triage checklist)?
 *'''Check for damage'''
-If the case is dirty, clean it off with a rag.  If the battery looks beaten up or warped, change it with a good one.
+If the case is dirty, clean it off with a rag.  If the (laptop) battery looks beaten up or warped, change it with a good one.
 ==Set Up Your Computer==
@@ Line 18: / Line 18: @@
 *Laptop RAM is never tested before being installed, so you can leave the RAM the computer came with for the moment
 *For MacBooks -- replace the HDD with an imaged one
-*For iBooks, MacBook Pros and other hard-to-work-on laptops, leave the hDD where it is and you'll follow directions to wipe it later
+*For iBooks, MacBook Pros and other hard-to-work-on laptops, leave the HDD where it is and you'll follow directions to wipe it later
 *Attach keyboard/mouse, monitor, network cable, and power cord (as necessary)
 ===iMacs:===
@@ Line 27: / Line 27: @@
 ==Booting into OS X==
 '''From Network:'''
@@ Line 70: / Line 71: @@
 *Check to see if the '''Freegeek''' wireless network shows up on the list
 Disconnect the wired network, select '''Freegeek''' from the list, open up a browser, and navigate to any web page.  If you see the Free Geek click-through page, it works.
 ----
@@ Line 108: / Line 102: @@
 ----
-==Test the Keyboard (laptop only)==
+==Test the memory==
-*{{Template:Laptop_Input_Testing}}
+This test should only be run if you were not able to install all tested memory (anything with Laptop RAM or older iMacs)
 ----
@@ Line 120: / Line 118: @@
 =Xubuntu 12.04LTS Time!=
 (this is more of an outline at this point, more details to come.  Go To [[MacBuild_Xubuntu_QC_Checklist]] for more instructions.)
 '''Are you working with a MacBook or MacPro?'''
@@ Line 135: / Line 139: @@
 '''Instructions for un-wiped hard drives'''
 ===Wipe Hard Drive===
-*Boot to the desktop (try Xubuntu - not install) with an i386 Xubuntu 12.04 desktop disk
+*Insert iPXE disk in optical drive and connect computer to a network cable
-*When desktop appears, open a terminal and run badblocks:
+*Boot computer while holding Option key. Choose the Windows disk from the boot options listed.
-** <code> sudo badblocks -wvvf -c1024 -e1 /dev/sda </code>
+*When the network options come up, choose '''Laptop Build >> Disk Test''' and press enter when prompted to verify the hard dive installed
 Find more hard drive wiping instructions at [[Hard_drive_wiping_checklist]]
 ----
@@ Line 143: / Line 148: @@
 ===Install Xubuntu===
 *If you just wiped the disk, follow these steps:
-**When badblocks is succesfully completeted, close terminal and click on install icon
+**When badblocks has successfully completed, make sure you are still booted to the iPXE disk.
-**follow prompts and install ubuntu
+***Again Select '''Laptop Build''' but then choose '''Xubuntu install'''
 **after reboot, select System-> Hardware drivers and activate B43 wireless driver
 ===Install Freegeek customization===
@@ Line 176: / Line 179: @@
 **<code>sudo apt-get update</code>
 **<code>sudo apt-get upgrade</code>
 ==[[MacBuild Xubuntu QC Checklist|Hardware Testing in Xubuntu]]==

@@ Line 121: / Line 121: @@
 (this is more of an outline at this point, more details to come.  Go To [[MacBuild_Xubuntu_QC_Checklist]] for more instructions.)
-==Are you working on an iMac?==
+'''Are you working with a MacBook or MacPro?'''
 *If so you probably did NOT install an imaged hard drive with Xubuntu on it. Follow the instructions below to wipe the hard drive, install Xubuntu and Freegeek customizations.
 ----
-==Are you working with a MacBook or MacPro?==
+| width="100%" style="border: 1px solid #6688AA; background-color:#FFFFFF; padding:1em;" valign="top"|
-==Wipe hard drive (only do this step if you have not installed an imaged or wiped hard drive)==
+'''Instructions for un-wiped hard drives'''
 *Boot to the desktop (try Xubuntu - not install) with an i386 Xubuntu 12.04 desktop disk
 *When desktop appears, open a terminal and run badblocks:
@@ Line 136: / Line 141: @@
 ----
-==Install Xubuntu (only do this step if you have not installed an imaged drive)==
+===Install Xubuntu===
 *If you just wiped the disk, follow these steps:
 **When badblocks is succesfully completeted, close terminal and click on install icon
@@ Line 145: / Line 150: @@
 *If you installed an imaged drive, just start Xubuntu
-==Install Freegeek customization (only do this step if you have not installed an imaged drive)==
+===Install Freegeek customization===
-*If you just installed Xubuntu you will need to add the freegeek customization. Open System->Administration>Synaptic Package Manager and add the freegeek repository to the list of repositories.
+*If you just installed Xubuntu you will need to add the freegeek customization. Open System->Administration>Synaptic Package Manager and add the
 **click on settings and select repositories
 ** click on the other software tab and then the Add button and enter the address of the freegeek repository
@@ Line 163: / Line 169: @@
 *reboot computer
 *Select System->Preferences->Screensaver and deselect the lock screen option
-==Run updates (do this on all computers)==
+|}
 *If you have installed an imaged hard drive you only need to run the updates.
 **<code>sudo apt-get update</code>
 **<code>sudo apt-get upgrade</code>
-==Hardware Testing in Xubuntu==
+==[[MacBuild Xubuntu QC Checklist|Hardware Testing in Xubuntu]]==
 ===Set up printers===

@@ Line 100: / Line 100: @@
 *If there are any gross artifacts, such as lines on the screen or a plaid screen, consult your instructor. Occasional white pixels are OK.
 ----
-==Test the iSight camera==
+==Test the iSight camera (Laptop and iMac only)==
 *Double click on the OS X Testing HDD icon and then double click on Applications. Double click on the Photo Booth application to open it. If you can see yourself in the Photo Booth application the camera works.
 ----

@@ Line 24: / Line 24: @@
 *PPC: HDDs are difficult to install, so you'll wipe the drive following the directions in this packet later.  Depending on the model, RAM is easy to install.  Check the model number on iFixit.com to see which one you have.  Ask your instructor for clarification.
-----
+=OS X Triage=
-===Booting into OS X===
+==Booting into OS X==
 '''From Network:'''
@@ Line 42: / Line 42: @@
 ----
-===Confirm hardware===
+==Confirm hardware==
 *Click on the System Profiler icon in the dock.
 *Check the '''ATA''' and '''Memory''' sections of ''System Profiler'' to confirm that it matches what you've added to the system so far
@@ Line 51: / Line 51: @@
 ----
-===Test CD writing===
+==Test CD writing==
 If you determined that the optical drive in the system can write CD-RWs, do the following:
 *Erase a rewritable CD disk
@@ Line 66: / Line 66: @@
 ----
-===Check if WiFi works===
+==Check if WiFi works==
 *Click on the AirPort icon near the upper-right corner of the screen
 *Check to see if the '''Freegeek''' wireless network shows up on the list
@@ Line 72: / Line 72: @@
 ----
-===Test the memory===
+==Test the memory==
 This test should only be run if you were not able to install all tested memory (anything with Laptop RAM or older iMacs)
 *Open "rember" by clicking on the icon in the dock.
@@ Line 80: / Line 80: @@
 ----
-===Stress test the CPU===
+==Stress test the CPU==
 *Click on the cpu test icon in the dock
 *choose primenet as the test type and start test
@@ Line 87: / Line 87: @@
 ----
-===Stress test the GPU===
+==Stress test the GPU==
 *Set up the screen saver for the GPU test.
 **Under the Apple menu select '''System Preferences''' > '''Desktops and Screen Saver'''
@@ Line 100: / Line 100: @@
 *If there are any gross artifacts, such as lines on the screen or a plaid screen, consult your instructor. Occasional white pixels are OK.
 ----
-===Test the iSight camera===
+==Test the iSight camera==
 *Double click on the OS X Testing HDD icon and then double click on Applications. Double click on the Photo Booth application to open it. If you can see yourself in the Photo Booth application the camera works.
 ----
-===Check The Battery (laptop only)===
+==Check The Battery (laptop only)==
 *Select the Coconut Battery icon from dock. Note the battery capacity (not the current charge) and remember that we will need to enter this value in the Notes portion of the printme sheet. For example: "according to Coconut Battery the battery has 67% of original capacity".
 ----
-===Test the Keyboard (laptop only)===
+==Test the Keyboard (laptop only)==
 *{{Template:Laptop_Input_Testing}}
 ----
-===Bless the Hard Drive===
+==Bless the Hard Drive==
 *Open a terminal and type
   sudo bless --device /dev/disk0s1 --setBoot --legacy