Difference between revisions of "Removing components from systems"
Jump to navigation
Jump to search
Line 11: | Line 11: | ||
wantmobo [label="Do we want the\nMOTHERBOARD?\nSee the BLACK CHART"] | wantmobo [label="Do we want the\nMOTHERBOARD?\nSee the BLACK CHART"] | ||
− | process_hds [label="Remove ALL\nHARD DRIVES\nand put them in\nthe | + | process_hds [label="Remove ALL\nHARD DRIVES\nand put them in\nthe APPROPRIATE BOX\n(check color)", shape="box"] |
process_case1 [label="Test the power supply\nIf it fails, remove it.\nOtherwise, leave it in place.", shape="box"] | process_case1 [label="Test the power supply\nIf it fails, remove it.\nOtherwise, leave it in place.", shape="box"] | ||
Line 26: | Line 26: | ||
process_mobo4 [label="Take the motherboard to\nAdvanced Testing.", shape="box"] | process_mobo4 [label="Take the motherboard to\nAdvanced Testing.", shape="box"] | ||
− | |||
put_on_cart [label="Put the system on the cart\nwith label facing out", shape="box", style="bold"] | put_on_cart [label="Put the system on the cart\nwith label facing out", shape="box", style="bold"] | ||
Revision as of 11:44, 19 May 2009
ORANGE CHART
Notes
Do not pull anything unless these instructions (or the whiteboard) say to pull it. This includes ribbon cables.
- When pulling sound cards, leave sound cables attached to card (not CD Drive or motherboard)
- Do not pull risers. (They are designed to go with the motherboard they came with and are not generic.)
- When pulling any kind of drive, rails and brackets should stay with the system.
- half-height sized cards
- A few PCI or AGP cards will have a back plate that is only be half as tall as normal cards. These are "half height" cards and need to be left in the box.
- This refers to the size of the "stem" of the card, not the card itself.
- When pulling cards, leave cables attached to card
- Do not pull risers. (They are designed to go with the case they came with and are not generic.)
- Do not pull a "card" that does not go into an industry standard slot. (We do not consider these to be cards, and they need to stay with their motherboards.)
YELLOW LIGHT SYSTEMS
- Do not pull anything unless these instructions (or the white board) say to pull it. This includes ribbon cables.
- Remove the following drives
- Hard drives -- all of them
- DVD drives -- regardless of speed.
- (They must have a standard rectangular faceplate.)
- Recordable or rewritable CD drives -- regardless of speed.
- (They must have a standard rectangular faceplate.)
- Removeable hard drive enclosures. (These look like little drawers).
- Leave all rails and drive sleds in case!
- Remove all memory
- (i.e. DDRs, SDRAM, RAMBUS, SODIMMS, etc.)
- Remove the following cards
- Remove any US Robotics brand ISA modems marked Sportster.
- Remove any PCI cards
- Remove any PCI-e cards
- Remove any AGP cards
- Removed 2GHz and faster processors
- Remove all power supplies
- (both AT and ATX)
- Remove button batteries
- (unless they are soldered onto the motherboard)
- Remove Macintosh batteries (in case you're taking apart a Mac)
- Remove 3.5 inch face plates
- Also, check the whiteboard
- (From time to time there are additional components that we want pulled. This can vary from day to day depending on our need.)
- Place the system on the cart
- (Make sure the front labels are all facing the same way)