Difference between revisions of "External Hard Drive Testing New Format"
m |
m |
||
| Line 20: | Line 20: | ||
|- | |- | ||
| Plug it in and see if it gets power || | | Plug it in and see if it gets power || | ||
| − | * If not, try 1 or 2 more power adapters. If that doesn't work, '''remove the hard drive''', and recycle the enclosure. | + | * If not, try 1 or 2 more power adapters. If that doesn't work, '''remove the donor's hard drive''', and recycle the enclosure. |
|- | |- | ||
| − | | Open the enclosure and remove the hard drive || | + | | Open the enclosure and remove the donor's hard drive || |
* Immediately give the hard drive to a key holder to lock it up. (If there is no-one around then put it in the incoming hard drive box in Pre-build). | * Immediately give the hard drive to a key holder to lock it up. (If there is no-one around then put it in the incoming hard drive box in Pre-build). | ||
|- | |- | ||
| Line 30: | Line 30: | ||
|- | |- | ||
| If it mounts and you are able to open the files on the drive (If you don't see it on desktop go to Places-> Computer and double-click on the icon) || | | If it mounts and you are able to open the files on the drive (If you don't see it on desktop go to Places-> Computer and double-click on the icon) || | ||
| − | * Remove the | + | * Remove the Advanced Testing Hard Drive. |
* Fill out "Tested By" sticker - write whether it is SATA or IDE. | * Fill out "Tested By" sticker - write whether it is SATA or IDE. | ||
* Put the enclosure in the Store Box. | * Put the enclosure in the Store Box. | ||
| Line 38: | Line 38: | ||
|- | |- | ||
| If it still won't mount || | | If it still won't mount || | ||
| − | * Remove the | + | * Remove the Advanced Testing Hard Drive and recycle the enclosure. |
|- | |- | ||
Revision as of 20:35, 20 September 2010
Have the Advanced Testing staff or key holder get you the following:
- External H.D. Testing Kit, which contains:
- Hard Drives (formatted, partitioned, & with files on them),
- Power Adapters.
Match the power adapters with the external hard drive enclosures by looking at the connector, voltage and amps.(There may be matched hard drive enclosures in marked box from the Tardis.) Match volts & amps exactly. Do NOT use a power adapter with less amps than the enclosure requires, you will get false a negative on the enclosure, either because it will not turn on at all, or because it will, but the drive will not be recognized. Using a power adapter with the same volts but higher amps is a bad idea because this may send too many volts into the enclosure, depending both on if the enclosure requires a "regulated" power adapter, and whether or not the power adapter is "regulated".
NEVER, under ANY circumstances, connect a donor's hard drive to a computer. Accessing donor data is a violation of FreeGeek's Data Security Policy. .
|