Difference between revisions of "Lcd monitor testing"
(Raised Store Spec to >= 19 inches) |
|||
(24 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
+ | {{migrated}} | ||
+ | [https://docs.google.com/document/d/18HBXsJDn0ycxwdX3RtTzYq1-5yXiEyUlvh6sk4WnPiA/edit?usp=sharing Link] | ||
+ | |||
'''A How-To''' | '''A How-To''' | ||
---- | ---- | ||
'''Pick up a monitor from the shelf where Receiving has placed it.''' | '''Pick up a monitor from the shelf where Receiving has placed it.''' | ||
− | |||
---- | ---- | ||
'''The monitor needs to be plugged in by two cords:''' | '''The monitor needs to be plugged in by two cords:''' | ||
Line 9: | Line 11: | ||
***Boxes of power supplies are labeled with their volt and amp output. On the monitor there should be a sticker with specifications about what kind of power supply is needed (for example, “12V 3.5A”). Find a cord in the boxes that will fit. | ***Boxes of power supplies are labeled with their volt and amp output. On the monitor there should be a sticker with specifications about what kind of power supply is needed (for example, “12V 3.5A”). Find a cord in the boxes that will fit. | ||
*'''Sometimes there will be no cord that fits the monitor.''' In this case, determine whether the monitor is fancy, new, in really good condition and worth saving, or not (''disambiguation needed''). | *'''Sometimes there will be no cord that fits the monitor.''' In this case, determine whether the monitor is fancy, new, in really good condition and worth saving, or not (''disambiguation needed''). | ||
− | **If it is worth saving, especially if it measures 19 inches diagonally, label with the kind of power | + | **If it is worth saving, especially if it measures 19 inches diagonally or larger, label with the kind of power adapter needed (i.e., “12V 3.5A”) on a blank sticker and place neatly with other such monitors. |
− | *'''Sometimes you can find a power | + | *'''Sometimes you can find a power adapter that fits, but is not an exact match with the output listed on the monitor.''' So long as the volts (“V”) match up and the amps (“A”) are above the listed requirement (never under!) this is okay. |
*'''Sometimes the video cord will be DVI rather than VGA''' (labeled with a diagram). Find a DVI/VGA adapter (they are in a box on the shelf with the multiplexer in Build) and use it in the multiplexer to plug in the cord. | *'''Sometimes the video cord will be DVI rather than VGA''' (labeled with a diagram). Find a DVI/VGA adapter (they are in a box on the shelf with the multiplexer in Build) and use it in the multiplexer to plug in the cord. | ||
---- | ---- | ||
− | ''' | + | '''Recycle any monitor that shows damage/defects (cracked or scratched screen, broken case, is not cleanable). Recycle a monitor if it has no base.''' |
---- | ---- | ||
− | ''' | + | '''Plug the VGA cord into a multiplexer and the power cord into a power strip.''' NOTE: Some of the ports on the multiplexers have splitter cables plugged in. These are to save wear-&-tear on the multiplexer ports, do NOT plug 2 monitors into 1 cable - the monitors will be too dim & look like they should be recycled. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<br> | <br> | ||
<br> | <br> | ||
+ | ---- | ||
+ | '''Turn on the monitor - NOTE: some monitors have an on/off rocker switch in addition to the on/off button.''' | ||
+ | *Does it turn on? | ||
+ | *Reset the monitor to factory settings with the button or menu option called "AUTO" or "RESET" - this will remove any custom settings that the donor caused, also sets the monitor to the highest resolution that the monitor/video card can achieve. | ||
+ | *Set Brightness & Contrast to 85%. | ||
+ | *How is the quality of the video? | ||
+ | **Is lettering in focus? | ||
+ | **Are the colors "true" (is white really white, not grey; is red really red, not pink or purple or brown, etc)? | ||
+ | ---- | ||
+ | '''If the monitor does not turn on,''' or there are a lot of weird stripes, or it's flickering (or any other number of things that amount to a non-functioning monitor): | ||
+ | *first determine whether it is "'''Covered'''" or “'''UnCovered'''” (it is "'''Covered'''" unless there is a sticker on the front reading "'''Uncovered Electronic Device'''") and mark as such on the clipboard (put an "UnCovered" sticker here after printing). | ||
<br> | <br> | ||
<br> | <br> | ||
<br> | <br> | ||
+ | **If it is "'''Covered'''", put it into the big cardboard box labeled “'''Covered LCD-Monitors Only'''” in the warehouse. | ||
+ | **If it is "'''UnCovered'''", put it into the big cardboard box labeled “'''UnCovered LCD-Monitors Only'''” in the warehouse | ||
---- | ---- | ||
− | ''' | + | '''Add as many monitors to the test batch as you have room for. Working monitors should be left on for 3 hours. Write the start time of the batch on the whiteboard.''' |
− | + | *Once that time has passed and it seems to be working, unplug them and clean them off with the available cleaning supplies. | |
− | * | + | *Label them with your initials on a “Tested by ___” sticker (also usually on the clipboard). |
− | * | ||
− | |||
− | |||
− | |||
---- | ---- | ||
'''While you wait, please sort through any incoming power supplies.''' | '''While you wait, please sort through any incoming power supplies.''' | ||
*They need to be wrapped neatly, rubber-banded and placed in their appropriate home. | *They need to be wrapped neatly, rubber-banded and placed in their appropriate home. | ||
---- | ---- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<br> | <br> | ||
<br> | <br> | ||
Line 67: | Line 53: | ||
<br> | <br> | ||
<br> | <br> | ||
− | |||
'''If the Monitor passes test:''' | '''If the Monitor passes test:''' | ||
− | * REMEMBER: | + | * REMEMBER: '''ALL''' Widescreen Monitors are Store Spec. |
'''Adoption/Build Spec:''' | '''Adoption/Build Spec:''' | ||
+ | * '''NO''' Widescreen of any size/color | ||
+ | * <= 17 inches | ||
+ | * Black or silver | ||
+ | * Standard power | ||
+ | * NO built-in speakers | ||
+ | * NO extra ports, just video (no USB, no speaker jacks, etc) | ||
+ | * Power cord and video cable | ||
+ | * Wrap the monitor and power cable neatly around the base of the monitor | ||
+ | * Bring it to classroom and put on the middle two wire-rack shelves in the back of the room (do not disturb class). When these are full, please fill the top Adoption/Build shelf in the warehouse. If this shelf is full, please put them on the Grants shelf. | ||
+ | ---- | ||
+ | '''Grant Spec:''' | ||
+ | * '''NO''' Widescreen of any size/color | ||
* <= 17 inches | * <= 17 inches | ||
* Black, Beige, or White | * Black, Beige, or White | ||
* Power Adapter OK | * Power Adapter OK | ||
− | |||
* Power cord and video cable | * Power cord and video cable | ||
* Wrap the monitor and power cable neatly around the base of the monitor | * Wrap the monitor and power cable neatly around the base of the monitor | ||
− | * Bring it to the Adoption/Build shelf in the warehouse. | + | * Bring it to the Hardware Grants shelf in the warehouse. If these shelves are full, please put Adoption/Build spec monitors on the bottom Adoption/Build shelf in the warehouse. |
---- | ---- | ||
'''Store Spec:''' | '''Store Spec:''' | ||
+ | * '''ALL''' Widescreen of any size/color | ||
* >= 19 inches | * >= 19 inches | ||
* No Beige, no White | * No Beige, no White | ||
− | * Standard | + | * Standard power |
* No power cord or video cable (unless permanently attached) | * No power cord or video cable (unless permanently attached) | ||
* Bring it to the Store shelves in the warehouse. | * Bring it to the Store shelves in the warehouse. | ||
---- | ---- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[Category:Hardware Testing]] | [[Category:Hardware Testing]] | ||
[[Category:Howto]] | [[Category:Howto]] |
Latest revision as of 13:06, 1 August 2014
This page has been migrated to a document on Free Geek's Google Drive. Information remaining behind may no longer be relevant. MIGRATOR: When you have tagged this page as migrated, (Link to new page immediately below.) |
A How-To
Pick up a monitor from the shelf where Receiving has placed it.
The monitor needs to be plugged in by two cords:
- a VGA (video cord, usually blue, labeled with a diagram) and a power supply.
- Some power supplies are PC power cords (labeled with a diagram) and will plug into the monitor with three slots. Others may be more specialized (3-prong & 2-prong, for example, which are labeled with a diagram).
- Boxes of power supplies are labeled with their volt and amp output. On the monitor there should be a sticker with specifications about what kind of power supply is needed (for example, “12V 3.5A”). Find a cord in the boxes that will fit.
- Some power supplies are PC power cords (labeled with a diagram) and will plug into the monitor with three slots. Others may be more specialized (3-prong & 2-prong, for example, which are labeled with a diagram).
- Sometimes there will be no cord that fits the monitor. In this case, determine whether the monitor is fancy, new, in really good condition and worth saving, or not (disambiguation needed).
- If it is worth saving, especially if it measures 19 inches diagonally or larger, label with the kind of power adapter needed (i.e., “12V 3.5A”) on a blank sticker and place neatly with other such monitors.
- Sometimes you can find a power adapter that fits, but is not an exact match with the output listed on the monitor. So long as the volts (“V”) match up and the amps (“A”) are above the listed requirement (never under!) this is okay.
- Sometimes the video cord will be DVI rather than VGA (labeled with a diagram). Find a DVI/VGA adapter (they are in a box on the shelf with the multiplexer in Build) and use it in the multiplexer to plug in the cord.
Recycle any monitor that shows damage/defects (cracked or scratched screen, broken case, is not cleanable). Recycle a monitor if it has no base.
Plug the VGA cord into a multiplexer and the power cord into a power strip. NOTE: Some of the ports on the multiplexers have splitter cables plugged in. These are to save wear-&-tear on the multiplexer ports, do NOT plug 2 monitors into 1 cable - the monitors will be too dim & look like they should be recycled.
Turn on the monitor - NOTE: some monitors have an on/off rocker switch in addition to the on/off button.
- Does it turn on?
- Reset the monitor to factory settings with the button or menu option called "AUTO" or "RESET" - this will remove any custom settings that the donor caused, also sets the monitor to the highest resolution that the monitor/video card can achieve.
- Set Brightness & Contrast to 85%.
- How is the quality of the video?
- Is lettering in focus?
- Are the colors "true" (is white really white, not grey; is red really red, not pink or purple or brown, etc)?
If the monitor does not turn on, or there are a lot of weird stripes, or it's flickering (or any other number of things that amount to a non-functioning monitor):
- first determine whether it is "Covered" or “UnCovered” (it is "Covered" unless there is a sticker on the front reading "Uncovered Electronic Device") and mark as such on the clipboard (put an "UnCovered" sticker here after printing).
- If it is "Covered", put it into the big cardboard box labeled “Covered LCD-Monitors Only” in the warehouse.
- If it is "UnCovered", put it into the big cardboard box labeled “UnCovered LCD-Monitors Only” in the warehouse
Add as many monitors to the test batch as you have room for. Working monitors should be left on for 3 hours. Write the start time of the batch on the whiteboard.
- Once that time has passed and it seems to be working, unplug them and clean them off with the available cleaning supplies.
- Label them with your initials on a “Tested by ___” sticker (also usually on the clipboard).
While you wait, please sort through any incoming power supplies.
- They need to be wrapped neatly, rubber-banded and placed in their appropriate home.
If the Monitor passes test:
- REMEMBER: ALL Widescreen Monitors are Store Spec.
Adoption/Build Spec:
- NO Widescreen of any size/color
- <= 17 inches
- Black or silver
- Standard power
- NO built-in speakers
- NO extra ports, just video (no USB, no speaker jacks, etc)
- Power cord and video cable
- Wrap the monitor and power cable neatly around the base of the monitor
- Bring it to classroom and put on the middle two wire-rack shelves in the back of the room (do not disturb class). When these are full, please fill the top Adoption/Build shelf in the warehouse. If this shelf is full, please put them on the Grants shelf.
Grant Spec:
- NO Widescreen of any size/color
- <= 17 inches
- Black, Beige, or White
- Power Adapter OK
- Power cord and video cable
- Wrap the monitor and power cable neatly around the base of the monitor
- Bring it to the Hardware Grants shelf in the warehouse. If these shelves are full, please put Adoption/Build spec monitors on the bottom Adoption/Build shelf in the warehouse.
Store Spec:
- ALL Widescreen of any size/color
- >= 19 inches
- No Beige, no White
- Standard power
- No power cord or video cable (unless permanently attached)
- Bring it to the Store shelves in the warehouse.