Difference between revisions of "Testing Wireless Cards"

From FreekiWiki
Jump to navigation Jump to search
(first stab at how to test wireless PCMCIA cards)
 
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
−
So you want to test PCMCIA wireless cards for laptops?  I imagine the process might look something like this:
+
Testing method for WiFi PC Cards (ver. 3)
−
 
 
−
# Get a laptop
 
−
# Install a bunch of drivers.  These can be found under System > Administration > Restricted Drivers Manager
 
−
# Take a bunch of wireless cards and the laptop to the classroom (or somewhere that gets a wireless signal) and insert a wireless card.
 
−
:* does it work with the GUI?
 
−
:* open a terminal window and type "sudo iwconfig" to see chipset (usually under "Nickname")
 
  
 +
# Set up a laptop which is not cabled to the LAN. Preferably, it should have no WiFi internal card; remove if practical.
 +
# Insert into PC Card Slot. Watch for a power LED on the card (One light good; two lights gooder). Reboot if none appears and go to step 2 after login; if the power LED appears, go to step 2 now.
 +
# Watch the WiFi signal strength meter in the panel for 60 secs. If it starts hunting for a connection, chances are good it will work.
 +
# In a terminal window, run a shell script which does
 +
#:  lspci | grep Network | grep -v 00:
 +
#:  iwconfig | grep wlan | grep -v wlan0
 +
# The first line returned by the script tells the chipset; the last line returned by the script tells if the card worked.
 +
# If the card worked, apply a sticker which says OK, the letter B if 802.11b or G if 802.11G, and the chipset found.
 +
# If the chipset was found but the Freegeek wireless network was not found, use a Sharpie and mark that on the card after a bold X
 +
# If the chipset was not found, reboot the PC and try again. If, after reboot, the chipset still was not found, put a bold XX on the card with a Sharpie.
 +
# Sort the cards by working (5), retest X (6) and retest XX (7).  The retest cards should be tested in a significantly different machine.
  
 
check out this page, also: [[Wireless card compatibility list]]
 
check out this page, also: [[Wireless card compatibility list]]
  
−
[[Category:Laptops]]
+
[[Category:Laptops Archive]]

Latest revision as of 20:01, 6 November 2013

Testing method for WiFi PC Cards (ver. 3)

  1. Set up a laptop which is not cabled to the LAN. Preferably, it should have no WiFi internal card; remove if practical.
  2. Insert into PC Card Slot. Watch for a power LED on the card (One light good; two lights gooder). Reboot if none appears and go to step 2 after login; if the power LED appears, go to step 2 now.
  3. Watch the WiFi signal strength meter in the panel for 60 secs. If it starts hunting for a connection, chances are good it will work.
  4. In a terminal window, run a shell script which does
    lspci | grep Network | grep -v 00:
    iwconfig | grep wlan | grep -v wlan0
  5. The first line returned by the script tells the chipset; the last line returned by the script tells if the card worked.
  6. If the card worked, apply a sticker which says OK, the letter B if 802.11b or G if 802.11G, and the chipset found.
  7. If the chipset was found but the Freegeek wireless network was not found, use a Sharpie and mark that on the card after a bold X
  8. If the chipset was not found, reboot the PC and try again. If, after reboot, the chipset still was not found, put a bold XX on the card with a Sharpie.
  9. Sort the cards by working (5), retest X (6) and retest XX (7). The retest cards should be tested in a significantly different machine.

check out this page, also: Wireless card compatibility list

Retrieved from "http://wiki.freegeek.org/index.php?title=Testing_Wireless_Cards&oldid=69100"