Difference between revisions of "Network Switch Testing"

From FreekiWiki
Jump to navigation Jump to search
(changed to redirect)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
−
The network device testing station currently consists of a computer with a nick that can handle gigabit Ethernet and wireless g. This computer also has a serial port and software that can talk thought it.
+
#REDIRECT [[Network Testing]]
−
 
 
−
==Testing a switch ==
 
−
* Verify that the network device is not to be immediately recycled, by consulting the list below
 
−
* Connect power to the switch, and verify it starts up (some advanced switches may take up to a minute to start up)
 
−
* look for a reset button and if there is one reset it.
 
−
* Connect the network cable that has the internet on it to the wan or uplink port.
 
−
* Verify that the link lights illuminate on the switch for the appropriate ports.
 
−
* Plug in the network cable from the computer to the router.
 
−
* On the PC surf the internet. this should not feel slow.
 
−
** do this on every port by moving the network cable that connects to the computer
 
−
* check the wifi by connecting to it and serf the net
 
−
* If the network device has a way to login, try to.
 
−
 
 
−
== Recycle Criteria ==
 
−
;Devices to be recycled without testing
 
−
* DSL and cable modems (and DSL filters, phone cables, etc, if the store already has a few)
 
−
* DSL and cable modems with built in hub, 'internet router', or wireless
 
−
* 10BaseT hubs
 
−
* Cheap-looking little no-name-brand hubs if they are piling up at the testing station
 
−
* Cheap-looking little no-name-brand hubs if a matching power adapter can't be quickly found
 
−
* Devices with noisy or bad fans, or that appear physically damaged
 
−
 
 
−
;Devices to leave for advanced testing
 
−
* Consumer-grade internet routers (with WAN ethernet port, not with DSL or Cable ports)
 
−
* Consumer-grade wireless access points and wireless routers
 
−
* Managed 10/100 switches with a console port that do not seem to pass testing
 
−
* Professional-looking rack mount routers, firewalls, and other network devices
 
−
 
 
−
==Preparing the device for the store==
 
−
# Plug its AC adapter into the device and make sure they won't be separated. (Maybe use a rubber band)
 
−
# Put it it the clear plastic Store bin on the shelves.
 
−
 
 
−
[[Category: Howto]]
 

Latest revision as of 17:11, 16 September 2008

Redirect to:

Retrieved from "http://wiki.freegeek.org/index.php?title=Network_Switch_Testing&oldid=34587"