Difference between revisions of "Video Card Testing"

From FreekiWiki
Jump to navigation Jump to search
m (AGP Testing moved to Video Card Testing: Better Title)
 
(17 intermediate revisions by 9 users not shown)
Line 1: Line 1:
# Make sure the computer turned '''off'''.
+
{{migrated}}
# Check the Card over for blown caps. If blown caps are found recycle.
+
[https://docs.google.com/a/freegeek.org/document/d/1lIkZ1fi3yhwhse1e0Qa8-fudq0-lsLS4LcyHXRIYAZg/edit?usp=sharing New Page]
# Place The Video Card into the appropriate AGP, PCI, or PCIe slot on the motherboard.  
+
{|fontsize="14" border=".05" fontweight="bold" cellpadding=".5" width="100%"
# Attach the monitor cable to the video card and turn the computer on. If required ask for an adapter.
+
|-
# Let the program run until it tells you what the card is.
+
|align="left" padding=".5"|These are instructions for testing video cards. PC cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor.  Be sure to check the whiteboard for exceptions to the store box rules.  If the instructions tell you to send it to the store and the whiteboard says they don't want them, recycle them.
# Record what the screen says on a half label. Make sure to include the Vendor, Model, and Memory. It should say something like: (Voodoo Banshee 16 MB) or (RIVA TNT 16384 KB) or (Nvidia gf2 gts nv11 32 MB) or (Radeon 7000 R100 32 MB). This Label is to be placed on the Video Card.
+
{|fontsize="12" cellpadding=".5" border=".05" font-weight="bold" cellpadding=".7"
#* The software sometimes lies, double check the list of cards to see if it makes sense.
+
|-
# Turn off the computer and remove the video card. It's better (faster) to turn off the computer with the power supply switch rather than powering down (as in following the instructions on the screen).
+
|width="25%" align="center"|STEPS
# there are 4 categories of cards to save
+
|width="75%" align="center"|NOTES AND DETAILED INSTRUCTIONS
#* MacBuild = If the video card does not work and is one of the following - ATI Radeon, ATI Rage 128 Pro, Cards With a ADC
+
|-
#* Build = AGP Cards with 32 or 64 MB of ram
+
| Sort by slot type and memory size ||
#* Store = AGP Cards with above 64 MB of ram (and not MacBuild ones), PCI Cards with above 32 MB
+
* PCI-Express with 512 MB or more for the STORE
#* Recycle = cards that don't work, Cards with less than 32 MB of ram (the Yellow Bin)
+
* PCI-Express with at least one VGA port and 256 MB for Build
#* Tardis = PCI Express  
+
* PCI with 128 MB or more for the STORE
# Start over with new card.
+
* AGP with 512 MB or more for the STORE
 +
Recycle cards with less than the above minimum memory size for the slot type or obvious damage.
 +
 
 +
If the memory size is not on the card you will have to look it up. Try to find a number like 109-A67631-00 or 180-10403-0000-B00 on the card and Google that.
 +
 
 +
'' Send all cards that say Macintosh to Mac Land without testing, including the following:''
 +
*Nvidia geforce 6600 (model A386)
 +
*Nvidia geforce 7300 (model P345)
 +
*Nvidia geforce 7800
 +
*Nvidia quadro fx 4500
 +
|-
 +
| Check for Damage || Visually inspect the card and recycle any with blown capacitors or missing parts (like heatsink, fan or backplate).
 +
|-
 +
| Seat Card into Mobo || Place The Video Card into the appropriate PCI-e, PCI, or AGP slot on the motherboard. If the card has an extra power connector(s), plug in another power cable(s) from the power supply.
 +
|-
 +
| Plug In & Turn On || Attach the monitor cable to the video card. Turn the computer on, let it boot to the network menu then select '''Hardware Testing >>> Video Card Testing''' and let the program run until it tells you what the card is, then turn the computer off with the power button or switch (the software control will not work). On the cards we currently keep and test the program will under-report the memory size. Recycle the card if you see any abnormalities on the screen (lines on the screen, colored display, weird text, etc.). Test all VGA, DVI, HDMI and DisplayPort Ports, in a like manner.
 +
* The testing stations have both VGA(analog) and DVI(digital) input cables (You will need HDMI\DVI and DisplayPort\DVI adapters for those port types, they should be in the red tray between the stations).
 +
* You may have to switch the monitor between analog(VGA) and digital(DVI) modes manually.
 +
|-
 +
|| Determine Card Status ||
 +
Recycle in the yellow bin IF:
 +
#the card does not post
 +
#the card's display is unusual
 +
#the card is incomplete (missing a fan or faceplate)
 +
#it is a Silicon Integrated Systems (SiS) with model numbers 661/741/760 if PCI/AGP, and 662/761Gx if PCI-e
 +
Keep IF:
 +
#the card posts
 +
#there are no abnormalities in the display
 +
|-
 +
| Power Down || Turn off the computer, remove the video card and put your initialed "Tested by" sticker on it (The software control will not work, turn off the computer with the power supply switch).
 +
|-
 +
| Put it away || Bring to appropriate area determined by the type of card it is.
 +
* PCI-Express with 512 MB or more go into the STORE BOX
 +
* AGP with 512 MB or more go into the STORE BOX
 +
* PCI with 128 MB or more go into the STORE BOX
 +
* PCI-Express with at least one VGA port and 256 MB go to Build
 +
 
 +
|-
 +
| Do it again! || Thanks for your good work!
 +
|-
  
  
 
[[Category:Hardware Testing]]
 
[[Category:Hardware Testing]]
 
[[Category:Howto]]
 
[[Category:Howto]]
[[Category:Advanced Testing]]
 

Latest revision as of 13:00, 4 April 2014

deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


New Page

These are instructions for testing video cards. PC cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor. Be sure to check the whiteboard for exceptions to the store box rules. If the instructions tell you to send it to the store and the whiteboard says they don't want them, recycle them.
STEPS NOTES AND DETAILED INSTRUCTIONS
Sort by slot type and memory size
  • PCI-Express with 512 MB or more for the STORE
  • PCI-Express with at least one VGA port and 256 MB for Build
  • PCI with 128 MB or more for the STORE
  • AGP with 512 MB or more for the STORE

Recycle cards with less than the above minimum memory size for the slot type or obvious damage.

If the memory size is not on the card you will have to look it up. Try to find a number like 109-A67631-00 or 180-10403-0000-B00 on the card and Google that.

Send all cards that say Macintosh to Mac Land without testing, including the following:

  • Nvidia geforce 6600 (model A386)
  • Nvidia geforce 7300 (model P345)
  • Nvidia geforce 7800
  • Nvidia quadro fx 4500
Check for Damage Visually inspect the card and recycle any with blown capacitors or missing parts (like heatsink, fan or backplate).
Seat Card into Mobo Place The Video Card into the appropriate PCI-e, PCI, or AGP slot on the motherboard. If the card has an extra power connector(s), plug in another power cable(s) from the power supply.
Plug In & Turn On Attach the monitor cable to the video card. Turn the computer on, let it boot to the network menu then select Hardware Testing >>> Video Card Testing and let the program run until it tells you what the card is, then turn the computer off with the power button or switch (the software control will not work). On the cards we currently keep and test the program will under-report the memory size. Recycle the card if you see any abnormalities on the screen (lines on the screen, colored display, weird text, etc.). Test all VGA, DVI, HDMI and DisplayPort Ports, in a like manner.
  • The testing stations have both VGA(analog) and DVI(digital) input cables (You will need HDMI\DVI and DisplayPort\DVI adapters for those port types, they should be in the red tray between the stations).
  • You may have to switch the monitor between analog(VGA) and digital(DVI) modes manually.
Determine Card Status

Recycle in the yellow bin IF:

  1. the card does not post
  2. the card's display is unusual
  3. the card is incomplete (missing a fan or faceplate)
  4. it is a Silicon Integrated Systems (SiS) with model numbers 661/741/760 if PCI/AGP, and 662/761Gx if PCI-e

Keep IF:

  1. the card posts
  2. there are no abnormalities in the display
Power Down Turn off the computer, remove the video card and put your initialed "Tested by" sticker on it (The software control will not work, turn off the computer with the power supply switch).
Put it away Bring to appropriate area determined by the type of card it is.
  • PCI-Express with 512 MB or more go into the STORE BOX
  • AGP with 512 MB or more go into the STORE BOX
  • PCI with 128 MB or more go into the STORE BOX
  • PCI-Express with at least one VGA port and 256 MB go to Build
Do it again! Thanks for your good work!