Difference between revisions of "System Evaluation Special Instructions"
Jump to navigation
Jump to search
| Line 23: | Line 23: | ||
start -> righttype | start -> righttype | ||
righttype -> do_not_use_these_instructions [label="NO"] | righttype -> do_not_use_these_instructions [label="NO"] | ||
| − | righttype -> remove_tags | + | righttype -> remove_tags [label="YES"] |
remove_tags -> inspect [label="YES"] | remove_tags -> inspect [label="YES"] | ||
inspect -> blown_caps | inspect -> blown_caps | ||
Revision as of 16:54, 21 February 2008
MAIN Chart
Filling out a KEEPER label
- If there are any SDRAM slots, count and circle the correct number
- Do the same for RAMBUS and DDR slots
- (Some systems have both DDR and SDRAM slots.)
- For AMD chips:
- Circle AMD in the "Proc Type" section
- Write the processor model number in the "Processor Information" area
- For Intel and other chips:
- Circle the processor type (or write next to "Other")
- Write the processor speed in the "Processor Information" area
- If the system can take more than one processor, check the "Multi Proc Capable" box
- If the system POSTed successfully, check the "Successful POST" box
- If there are any ISA slots, circle ISA
- If there are any PCI slots, circle PCI
- If there is an AGP slot, circle AGP