Difference between revisions of "QC checklist"
Jump to navigation
Jump to search
| Line 54: | Line 54: | ||
'''Login to the system''' | '''Login to the system''' | ||
* username will be '''Default User''' <br> password = '''freegeek''' | * username will be '''Default User''' <br> password = '''freegeek''' | ||
| + | ---- | ||
| + | '''What Specification Category does the system fall under?''' | ||
| + | * Compare the CPU speed listed on the system's Green Light sticker with the '''FREE GEEK Specification Sheet''' on the wall to determine the category of specifications, or "specs," to which the system should be built. (Keep in mind that FG-PDX's are determined by their sticker, not their proc speed.) If you aren't sure what type of box you are working with, please check with your instructor to see how to proceed. | ||
---- | ---- | ||
'''Is the system standard?''' | '''Is the system standard?''' | ||
| − | * Check the '''Spec Sheet''' on the wall to see | + | * Check the '''Spec Sheet''' on the wall to see what else should be installed for your spec category, then compare the '''Spec Sheet''' to the '''Printme''' document saved to the Desktop. Does the box have any parts that are extra, or missing, or built to incorrect specifications? Take out and replace parts as necessary to ensure that all specs are correct. Ask an instructor if you are unsure how to do this. |
---- | ---- | ||
'''Update the software''' | '''Update the software''' | ||
| − | * | + | * Click on '''System''' >> '''Aministration''' >> '''Update Manager'''. When the Update Manager pops up, click "Check" to find updates, then "Install All." It may take some time to download and install packages, so feel free to continue on with other steps while this runs in the background. |
---- | ---- | ||
'''Drag the terminal icon to the top panel''' | '''Drag the terminal icon to the top panel''' | ||
| − | * Go to '''Applications''' >> '''Accessories''' >> '''Terminal''' | + | * Go to '''Applications''' >> '''Accessories''' >> '''Terminal'''. Use the mouse to click and hold the button down over the Terminal icon, drag, then release the mouse button when the icon hovers over the black panel along the top of the screen. |
| + | ---- | ||
| + | '''Stress test the system for a few minutes''' | ||
| + | * Open a terminal and run "'''stress-test'''". Wait a few minutes while it runs, and look for error messages. If you want to know more about what it's doing, open up another terminal and run "man stress". This may take some time; feel free to continue on to the next step while you wait. | ||
---- | ---- | ||
'''Run "basiccheck"''' | '''Run "basiccheck"''' | ||
| − | * Click on the terminal icon to open it. Type "'''basiccheck'''" to | + | * Click on the terminal icon to open it. Type "'''basiccheck'''", then press enter to begin the program. There are basiccheck checklists hanging on the supply shelves which will help with verifying whether each test passes or not. Feel free to ask your peers and the instructor what parts of basiccheck mean so that you understand what each test is checking. When you're finished, close the terminal. |
---- | ---- | ||
'''Test USB''' | '''Test USB''' | ||
| Line 72: | Line 78: | ||
'''Check time and date''' | '''Check time and date''' | ||
* Check the time and date in the top right corner. If incorrect: | * Check the time and date in the top right corner. If incorrect: | ||
| − | # Make sure network cable is plugged in | + | # Make sure network cable is plugged in. |
| − | # | + | # Click on the time and then click the "Edit" button. |
| − | + | # Click on the "Time Settings" button. | |
| − | # Click on the "Time Settings" button | + | # Manually adjust date and time. Press "Set System Time" to save. |
| − | # Manually adjust date and time | ||
---- | ---- | ||
'''Play an audio CD''' | '''Play an audio CD''' | ||
| − | * Do you hear what you expect? Is it loud enough to be heard easily? Repeat for each optical drive. Also repeat for any additional sound ports. | + | * Do you hear what you expect? Is it loud enough to be heard easily? Repeat for each optical drive. Also repeat for any additional sound ports. If any sound ports (typically coloured green, sometimes blue) don't play audio, cover them up with port covers or electrical tape. '''If you have functional onboard sound, and a sound card, the card will need to be removed and replaced with a slot cover.''' |
| − | * | + | * If you have surround sound ports (usually orange and gray) ignore them; we do not have the means to test this function. |
---- | ---- | ||
'''Read data CD''' | '''Read data CD''' | ||
| − | * If your file browser sees files on the drive, it can read data files. Repeat for each optical drive. | + | * If your file browser (listed under '''Places''' in the top panel) sees files on the drive, it can read data files. Repeat for each optical drive. |
---- | ---- | ||
| − | '''Read DVD''' | + | '''If you have a DVD Drive, Read DVD''' |
* If your file browser sees the file, the DVD-ROM can read files. If you are prompted to search for a suitable plugin or codec, '''please do not do this!''' The test still passes. Repeat for each DVD-ROM drive. | * If your file browser sees the file, the DVD-ROM can read files. If you are prompted to search for a suitable plugin or codec, '''please do not do this!''' The test still passes. Repeat for each DVD-ROM drive. | ||
---- | ---- | ||
| − | '''Test CD Writing | + | '''If you have an Optical Drive with CD-RW function, Test CD Writing''' |
* Insert a CD-RW disc into the drive and open Brasero Disc Burning (under '''Applications''' >> '''Sound & Video'''.) Select '''Data Project''', click on the green '''+''', then select '''examples.desktop''' and click '''Add'''. Click '''Burn''' in the lower right-hand corner. A new window will pop-up with a few options. If available, select '''Use burnproof''' and '''Burn the image directly without saving it to disc''' and click '''Burn'''. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop. | * Insert a CD-RW disc into the drive and open Brasero Disc Burning (under '''Applications''' >> '''Sound & Video'''.) Select '''Data Project''', click on the green '''+''', then select '''examples.desktop''' and click '''Add'''. Click '''Burn''' in the lower right-hand corner. A new window will pop-up with a few options. If available, select '''Use burnproof''' and '''Burn the image directly without saving it to disc''' and click '''Burn'''. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop. | ||
* Blank the disc using Brasero by selecting '''Tools''' >> '''Blank'''. | * Blank the disc using Brasero by selecting '''Tools''' >> '''Blank'''. | ||
---- | ---- | ||
| − | '''Test DVD Writing | + | '''If you have an Optical Drive with DVD-RW function, Test DVD Writing''' |
* Insert a DVD-RW disc into the drive and in the Brasero file browser follow the same steps as above to burn a data project. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop. | * Insert a DVD-RW disc into the drive and in the Brasero file browser follow the same steps as above to burn a data project. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop. | ||
* Blank the disc using Brasero by selecting '''Tools''' >> '''Blank'''. | * Blank the disc using Brasero by selecting '''Tools''' >> '''Blank'''. | ||
---- | ---- | ||
'''Remove all CDs and DVDs from the drive(s)''' | '''Remove all CDs and DVDs from the drive(s)''' | ||
| − | |||
| − | |||
| − | |||
---- | ---- | ||
'''Reboot using software controls''' | '''Reboot using software controls''' | ||
| Line 105: | Line 107: | ||
---- | ---- | ||
'''Create "printme" and print it to the desktop''' | '''Create "printme" and print it to the desktop''' | ||
| − | * From a terminal, type "'''printme"'''. | + | * From a terminal, type "'''printme"'''; this will generate a questionnaire in Command Line. '''When it asks what is notable about your system, refer to the white board for what should be included, and ask your instructor for any needed clarification.'''. Press enter to generate a web document. |
* Click "Print" in the browser that opens. Choose "Print to file." Save the file to the Desktop and name it "QC Printme", then press "Print" to save. Click on the printme icon on the Desktop to open it up. Check the sheet carefully, sometimes incorrect information is printed. | * Click "Print" in the browser that opens. Choose "Print to file." Save the file to the Desktop and name it "QC Printme", then press "Print" to save. Click on the printme icon on the Desktop to open it up. Check the sheet carefully, sometimes incorrect information is printed. | ||
---- | ---- | ||
'''Print a hard copy of "printme"''' | '''Print a hard copy of "printme"''' | ||
| − | * Click '''File > Print'''. Choose the "build" printer from the printer list and click "Print." If the "build" printer does not appear on the list of printers, simply go to '''System''' >> '''Administraton''' >> '''Printing''' >> '''Server''' >> '''Settings''' >> and check the first checkbox titled '''Show printers shared by other systems'''. | + | * Click '''File > Print'''. Choose the "build" printer from the printer list and click "Print." If the "build" printer does not appear on the list of printers, simply go to '''System''' >> '''Administraton''' >> '''Printing''' >> '''Server''' >> '''Settings''' >> and check the first checkbox titled '''Show printers shared by other systems'''. Close the localhost window that opens and select the "build" printer from the Print menu once it appears. Click Print and retrieve the sheet from the printer in the back (SW) corner of the room. |
---- | ---- | ||
'''Copy system ID (*very important!!*)''' | '''Copy system ID (*very important!!*)''' | ||
Revision as of 18:48, 23 November 2011
Welcome to the Build Workshop! Quality checking a few systems that others have built will be your first step, then you'll be ready to move on to assembling and checking software on systems.
Work through every step as well as you can, and then ask a neighbor or your Build instructor if you still have questions. Try and learn the reason for each of the steps: this knowledge will come in handy later when, inevitably, things aren't going as smoothly.
Use your resources! There are lots available to you - your neighbor, the Build assistants and instructors and, of course, the internet. Searching the web for answers to the challenge your facing is one of the best ways to learn. You can also access tips and troubleshooting ideas on our wiki (http://wiki.freegeek.org) under Build tips or in our Troubleshooting Guide (http://wiki.freegeek.org/index.php/Build_Troubleshooting_Guide).
BEFORE YOU POWER ON
Check what needs to be quality checked
- Grab a system from the QC shelves in the build room, and carry it to an open Build station.
Do you hear a rattling noise, caused by a screw or other loose component, upon moving the system?
- If so, find the culprit and secure/remove it.
Is the case properly put together and secure?
- If not, fix it!
Are all slots and bays covered?
- If not, cover 'em! Check to make sure they're screwed in tight by pushing on each one with your finger - if a slot cover falls out it can short out the motherboard.
Do you see more than one video, sound, or network ports?
- If yes, check with the Build instructor or assistant. If there are two, both need to be tested to figure out which one works. If both work, one is extra. Cover up any nonfunctional slots with electrical tape or port covers.
Is there Microsoft Branding? (Certificates of Authenticity) or Asset tags (identifying the last owner)?
- If there is, take them off. DO NOT remove FG-PDX, "uncovered electronic device" or Green Light stickers.
Is the system exterior clean?
- If not, use cleaner and rag to clean. The vacuum cleaner will help remove dust clogged in case fans. Heat from a hair dryer along with hand sanitizer and/or isopropyl (rubbing) alcohol can help loosen any stickers; ask your instructor where to find scraping tools to remove them.
Open up the system and check inside for:
- Blown capacitors (If found, the system must be rejected!)
- Whether the RAM is DDR or DDR2
- The RAM speed (will be the second number on the sticker) - you may want to write it down
- Any dust accumulation - please vacuum any you see out!
BOOT AND ENTER BIOS
Get into BIOS (Setup)
- Turn on the computer. The keystroke to enter setup should be displayed at bootup or on the printme. If not, you have to guess. Del, Esc, F1, F2 and F10 are typical. If you see "Ubuntu" on your screen, you have gone too far; reboot and try again. All BIOS are different. Feel free to explore how the BIOS you're using is set up.
Check boot order
- It should be: 1st- CD-ROM; 2nd-Hard Drive. If possible, disable other boot device options, such as floppy, network, or USB.
Are the USB ports enabled?
- Sometimes disabling/enabling USB ports isn't an option in BIOS. If you're having a hard time finding the USB ports in BIOS, try a header with "Peripherals", "Integrated Devices" or "Ports" in its name. If you still can't find anything, move on to the next step.
Save and exit BIOS
- The system should boot to the Ubuntu operating system.
HARDWARE AND SOFTWARE TESTING
Login to the system
- username will be Default User
password = freegeek
What Specification Category does the system fall under?
- Compare the CPU speed listed on the system's Green Light sticker with the FREE GEEK Specification Sheet on the wall to determine the category of specifications, or "specs," to which the system should be built. (Keep in mind that FG-PDX's are determined by their sticker, not their proc speed.) If you aren't sure what type of box you are working with, please check with your instructor to see how to proceed.
Is the system standard?
- Check the Spec Sheet on the wall to see what else should be installed for your spec category, then compare the Spec Sheet to the Printme document saved to the Desktop. Does the box have any parts that are extra, or missing, or built to incorrect specifications? Take out and replace parts as necessary to ensure that all specs are correct. Ask an instructor if you are unsure how to do this.
Update the software
- Click on System >> Aministration >> Update Manager. When the Update Manager pops up, click "Check" to find updates, then "Install All." It may take some time to download and install packages, so feel free to continue on with other steps while this runs in the background.
Drag the terminal icon to the top panel
- Go to Applications >> Accessories >> Terminal. Use the mouse to click and hold the button down over the Terminal icon, drag, then release the mouse button when the icon hovers over the black panel along the top of the screen.
Stress test the system for a few minutes
- Open a terminal and run "stress-test". Wait a few minutes while it runs, and look for error messages. If you want to know more about what it's doing, open up another terminal and run "man stress". This may take some time; feel free to continue on to the next step while you wait.
Run "basiccheck"
- Click on the terminal icon to open it. Type "basiccheck", then press enter to begin the program. There are basiccheck checklists hanging on the supply shelves which will help with verifying whether each test passes or not. Feel free to ask your peers and the instructor what parts of basiccheck mean so that you understand what each test is checking. When you're finished, close the terminal.
Test USB
- Plug in a USB mouse, see that the cursor moves and can interact with things. Repeat with all USB ports, including ports on the front of the system, if any.
Check time and date
- Check the time and date in the top right corner. If incorrect:
- Make sure network cable is plugged in.
- Click on the time and then click the "Edit" button.
- Click on the "Time Settings" button.
- Manually adjust date and time. Press "Set System Time" to save.
Play an audio CD
- Do you hear what you expect? Is it loud enough to be heard easily? Repeat for each optical drive. Also repeat for any additional sound ports. If any sound ports (typically coloured green, sometimes blue) don't play audio, cover them up with port covers or electrical tape. If you have functional onboard sound, and a sound card, the card will need to be removed and replaced with a slot cover.
- If you have surround sound ports (usually orange and gray) ignore them; we do not have the means to test this function.
Read data CD
- If your file browser (listed under Places in the top panel) sees files on the drive, it can read data files. Repeat for each optical drive.
If you have a DVD Drive, Read DVD
- If your file browser sees the file, the DVD-ROM can read files. If you are prompted to search for a suitable plugin or codec, please do not do this! The test still passes. Repeat for each DVD-ROM drive.
If you have an Optical Drive with CD-RW function, Test CD Writing
- Insert a CD-RW disc into the drive and open Brasero Disc Burning (under Applications >> Sound & Video.) Select Data Project, click on the green +, then select examples.desktop and click Add. Click Burn in the lower right-hand corner. A new window will pop-up with a few options. If available, select Use burnproof and Burn the image directly without saving it to disc and click Burn. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop.
- Blank the disc using Brasero by selecting Tools >> Blank.
If you have an Optical Drive with DVD-RW function, Test DVD Writing
- Insert a DVD-RW disc into the drive and in the Brasero file browser follow the same steps as above to burn a data project. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop.
- Blank the disc using Brasero by selecting Tools >> Blank.
Remove all CDs and DVDs from the drive(s)
Reboot using software controls
- Either open a terminal and run "sudo reboot", or use the system menu to reboot. Wait while it reboots, and ensure that the system powers on and offers a login screen without user intervention (e.g. without requiring that you "press F1 to boot").
Create "printme" and print it to the desktop
- From a terminal, type "printme"; this will generate a questionnaire in Command Line. When it asks what is notable about your system, refer to the white board for what should be included, and ask your instructor for any needed clarification.. Press enter to generate a web document.
- Click "Print" in the browser that opens. Choose "Print to file." Save the file to the Desktop and name it "QC Printme", then press "Print" to save. Click on the printme icon on the Desktop to open it up. Check the sheet carefully, sometimes incorrect information is printed.
Print a hard copy of "printme"
- Click File > Print. Choose the "build" printer from the printer list and click "Print." If the "build" printer does not appear on the list of printers, simply go to System >> Administraton >> Printing >> Server >> Settings >> and check the first checkbox titled Show printers shared by other systems. Close the localhost window that opens and select the "build" printer from the Print menu once it appears. Click Print and retrieve the sheet from the printer in the back (SW) corner of the room.
Copy system ID (*very important!!*)
- Copy system ID from printme onto blank sticker and put it on back of computer.
Add Free Geek Sticker and GNU/Linux Sticker
Check in with Build Instructor before you shut off your computer
- Tape your new "QC Printme" sheet on top of your computer after acquiring the Build Instructor's sign off.
Shut down and shelve the system
- Use software controls for the shutdown (either "sudo halt" in a Terminal or the System menu at the top). Ask a build instructor where to put the system once shutdown is complete.
Clean up work area if it is your last QC of the day
- Please put all tools away, throw out any garbage or sticker remains, put screws in the appropriate bins, wrap cords around your keyboard and mouse and generally straighten up.