Difference between revisions of "Slow Time Tasks"

From FreekiWiki
Jump to navigation Jump to search
(updated to Sorting reality)
Line 5: Line 5:
 
* Monitor Tetris
 
* Monitor Tetris
 
* Check boxes for properly wrapped cords.
 
* Check boxes for properly wrapped cords.
* Cleaning.
+
* Cleaning. Sweep around the incoming shelf, the Sorting Table, and below the Sorting Shelves.  
 
* Break down boxes.
 
* Break down boxes.
 
* Sort Anti-static bags, packaging material, and any of the other boxes along the front window.
 
* Sort Anti-static bags, packaging material, and any of the other boxes along the front window.
 
* Empty Recycling bin and Cardboard container, as well as rolling cart in hallway, along with recycling bins (cords, metal, styrofoam), etc.  Take paper and cardboard through the garage door to the bins located in the parking lot. Cardboard goes into  the big rolling bin, paper in to the blue curbside bins,  and, if you're replacing the blue bin from the hallway, return with an empty bin.  
 
* Empty Recycling bin and Cardboard container, as well as rolling cart in hallway, along with recycling bins (cords, metal, styrofoam), etc.  Take paper and cardboard through the garage door to the bins located in the parking lot. Cardboard goes into  the big rolling bin, paper in to the blue curbside bins,  and, if you're replacing the blue bin from the hallway, return with an empty bin.  
 
* Sort and move receiving boxes to their designated areas - e.g. Hardware Testing box to Hardware Testing/BETA, steel box to recycling.  
 
* Sort and move receiving boxes to their designated areas - e.g. Hardware Testing box to Hardware Testing/BETA, steel box to recycling.  
* Clean and organize Basic Testing area where keyboards and mice are tested. Cut the cords on any damaged or dirty items and send to appropriate places.  CBM for mice, rolling cart for dead keyboards.  
+
* Clean and organize Basic Testing area where keyboards and mice are tested.  
 +
Have a volunteer switch to Basic Testing if incoming keyboards and mice are overflowing, or Backstock is needed.  
 
* Sort and break down styrofoam, put it in a garbage bag and take to the warehouse.  Preferably into sizes about the size of a fist or slightly bigger.
 
* Sort and break down styrofoam, put it in a garbage bag and take to the warehouse.  Preferably into sizes about the size of a fist or slightly bigger.
* Sort batteries, bag all rechargeable batteries to get them ready for shipping. There may be more in the warehouse if box on the shelf is empty.  Please return rechargeable batteries, both packaged, and the batteries you weren't able to get to, back to the warehouse. If they are left in Receiving they may contaminated with other batteries, and packaged boxes will get unpackaged.  http://wiki.freegeek.org/index.php/Sorted_Batteries
+
* Sort batteries, bag all rechargeable batteries to get them ready for shipping. Please supervise volunteers closely when sorting and bagging batteries. Spot check to make sure no volunteer misunderstood the directions, or forgot parts of the directions.
 +
  There may be more batteries to bag in the warehouse.  Please return rechargeable batteries, both packaged, and the batteries you weren't able to get to, back to the warehouse check in area. If they are left in Sorting they may contaminated with other batteries, and packaged boxes will get unpackaged.  http://wiki.freegeek.org/index.php/Sorted_Batteries
 
* Ask the Recycling Warehouse if there are batteries to test (When tested, working ones can go to the store)
 
* Ask the Recycling Warehouse if there are batteries to test (When tested, working ones can go to the store)
 
* Ask the Recycling Warehouse if there are drive rails to deconstruct (separate metal from plastic parts)  
 
* Ask the Recycling Warehouse if there are drive rails to deconstruct (separate metal from plastic parts)  
* Deconstruct floppy disks and sort into their components (Magnetic/non-magnetic metal,trash and dirty plastic)  The flimsy circular media is trash.  The hard plastic outer shell is dirty plastic. If there aren't any in Receiving, ask in the Recycling Warehouse (Please leave a backstock for Recycling!)  The cloth from inside the disks does not need to be separated.
+
* Deconstruct floppy disks and sort into their components (Magnetic/non-magnetic metal,trash and floppy plastic)  The flimsy circular media is trash.  The hard plastic outer shell is floppy plastic. If there aren't any in Sorting, ask in the Recycling Warehouse (Please leave a backstock for Recycling!)  The cloth from inside the disks also needs to be separated, and can be included with the trash.
* Christmas lights aka Light strands - First verify whether the light strand works, if they do work, send to the store.  Light strands with LEDs do not need to be disassembled.  Have volunteers and staff wear gloves and safety glasses to prevent injury, specifically from broken bulbs.  Remove any replaceable bulb covers, sometimes these come in various decorative shapes.  Remove each bulb from the socket (little bit of plastic at the bottom of the bulb is ok to leave on), cut off the strands any bulbs that cannot be removed.  Place bulbs in a plastic bag and put the bag in the Advanced Recycling box in Receiving, or bring to a Recycling staff member in the warehouse.   
+
* Christmas lights aka Light strands - First verify whether the light strand works, if they do work, send to the store.  Light strands with LEDs do not need to be disassembled.  Have volunteers and staff wear gloves and safety glasses to prevent injury, specifically from broken bulbs.  Remove any replaceable bulb covers, sometimes these come in various decorative shapes.  Remove each bulb from the socket (little bit of plastic at the bottom of the bulb is ok to leave on), cut off the strands any bulbs that cannot be removed.  Place bulbs in a plastic bag and put the bag in the Advanced Recycling box in Sorting, or bring to a Recycling staff member in the warehouse.   
  
  

Revision as of 09:54, 18 October 2013

During any Sorting shift you may be caught with a full group of volunteers and absolutely no material to sort. What to do with so many willing hands and so few things to do? Slow Time Tasks!

  • Offer breaks to volunteers who have not taken their allotted breaks, depending on length of their shift.
  • Monitor Tetris
  • Check boxes for properly wrapped cords.
  • Cleaning. Sweep around the incoming shelf, the Sorting Table, and below the Sorting Shelves.
  • Break down boxes.
  • Sort Anti-static bags, packaging material, and any of the other boxes along the front window.
  • Empty Recycling bin and Cardboard container, as well as rolling cart in hallway, along with recycling bins (cords, metal, styrofoam), etc. Take paper and cardboard through the garage door to the bins located in the parking lot. Cardboard goes into the big rolling bin, paper in to the blue curbside bins, and, if you're replacing the blue bin from the hallway, return with an empty bin.
  • Sort and move receiving boxes to their designated areas - e.g. Hardware Testing box to Hardware Testing/BETA, steel box to recycling.
  • Clean and organize Basic Testing area where keyboards and mice are tested.

Have a volunteer switch to Basic Testing if incoming keyboards and mice are overflowing, or Backstock is needed.

  • Sort and break down styrofoam, put it in a garbage bag and take to the warehouse. Preferably into sizes about the size of a fist or slightly bigger.
  • Sort batteries, bag all rechargeable batteries to get them ready for shipping. Please supervise volunteers closely when sorting and bagging batteries. Spot check to make sure no volunteer misunderstood the directions, or forgot parts of the directions.
 There may be more batteries to bag in the warehouse.  Please return rechargeable batteries, both packaged, and the batteries you weren't able to get to, back to the warehouse check in area. If they are left in Sorting they may contaminated with other batteries, and packaged boxes will get unpackaged.  http://wiki.freegeek.org/index.php/Sorted_Batteries
  • Ask the Recycling Warehouse if there are batteries to test (When tested, working ones can go to the store)
  • Ask the Recycling Warehouse if there are drive rails to deconstruct (separate metal from plastic parts)
  • Deconstruct floppy disks and sort into their components (Magnetic/non-magnetic metal,trash and floppy plastic) The flimsy circular media is trash. The hard plastic outer shell is floppy plastic. If there aren't any in Sorting, ask in the Recycling Warehouse (Please leave a backstock for Recycling!) The cloth from inside the disks also needs to be separated, and can be included with the trash.
  • Christmas lights aka Light strands - First verify whether the light strand works, if they do work, send to the store. Light strands with LEDs do not need to be disassembled. Have volunteers and staff wear gloves and safety glasses to prevent injury, specifically from broken bulbs. Remove any replaceable bulb covers, sometimes these come in various decorative shapes. Remove each bulb from the socket (little bit of plastic at the bottom of the bulb is ok to leave on), cut off the strands any bulbs that cannot be removed. Place bulbs in a plastic bag and put the bag in the Advanced Recycling box in Sorting, or bring to a Recycling staff member in the warehouse.


If none of these tasks lasts long enough and it doesn't look like there will be any donations, consider diverting volunteers to another area. (ex: Recycling Warehouse) -- But don't forget to ask the area coordinator, front desk, AND the volunteer!