Difference between revisions of "Building a Harddrive Wiping and Testing Station"
KevinWright (talk | contribs) |
|||
| Line 1: | Line 1: | ||
''This document is waaaay out of date - Patrick 6/19/12'' | ''This document is waaaay out of date - Patrick 6/19/12'' | ||
| − | + | ||
= Make Your Boxes = | = Make Your Boxes = | ||
We use dummy boxes that boot off the network with two hot-swap harddrive trays each. | We use dummy boxes that boot off the network with two hot-swap harddrive trays each. | ||
Latest revision as of 12:55, 2 July 2014
This document is waaaay out of date - Patrick 6/19/12
Make Your Boxes
We use dummy boxes that boot off the network with two hot-swap harddrive trays each.
Keep it Modular
We're moving our advanced testing area, so we thought we'd make some of the hardrive wipers/testers a little more modular. We got a some aluminum rolling shelves and organized our wires so that a couple of power strips and a network cable would be the only things hanging off of it.
KVM + Network Hub is Easy
That is, unless one of your wires is dead. We recommend testing the setup a bit before getting all the wires neatly cable-tied.
http://farm3.static.flickr.com/2047/2253488812_c85c8e116b_o.jpg
Plug It In
Cable tying the power strips to the underneath of the shelves works pretty nicely and it keeps the power cords out of the way. Plug everything in and cross your fingers.
http://farm3.static.flickr.com/2090/2253523062_b3a974bc8c_o.jpg
