Revision as of 00:59, 12 January 2012

   Network Troubleshooting
--------------------------------
Home Page      user:scott
Tech Support   user:scott/02
Dir & Files    user:scott/03
Network        user:scott/04
Troubleshoot   user:scott/05
Laptops        user:scott/06
Resources      user:scott/07
Notes          user:scott/08

Template:TOC limit

top

Reset Modem and Router

Unplug Modem and Router
Reset Modem and Router (paper clip)
Reboot Machine

Is Browser Off-line?
Is cable plugged in?

top

Does computer recognize the Adapter?

Are drivers compatable with Umbuntu?

lspci

lspci - Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)

lsusb

lsusb - Bus 001 Device 003: ID 13b1:0026 Linksys

top

Troubleshoot Network from CMD line

ifconfig

ifconfig

eth0  Link encap:Ethernet  HWaddr 00:17:08:5f:dc:73  
      inet addr:192.168.1.8  Bcast:192.168.1.255  Mask:255.255.255.0

wlan0 Link encap:Ethernet  HWaddr 00:18:39:1d:31:d0  
      inet addr:192.168.1.7  Bcast:192.168.1.255  Mask:255.255.255.0

iwconfig

iwconfig

wlan0  IEEE 802.11bg  ESSID:"Karen's Wireless Network"  
       Mode:Managed  Frequency:2.437 GHz  Access Point: 00:18:01:FE:AB:AC

top

Ping Test

ping localhost 127.0.0.1

ping gateway (route -n)

ping 8.8.8.8 (google.com)

ping well.com
traceroute well.com (if installed)

DHCP Discover

sudo dhclient

Listening on LPF/eth0/00:17:08:5f:dc:73
Sending on   LPF/eth0/00:17:08:5f:dc:73
DHCP-REQUEST of 192.168.1.8 on eth0 to 255.255.255.255 port 67
DHCPA-CK of 192.168.1.8 from 192.168.1.1
bound to 192.168.1.8 -- renewal in 36968 seconds.

DNS (view records)

dig well.com (DNS NS + A records no MX records)

View Open Ports

nmap -P 0 localhost (sudo apt-get install nmap)

View Open TCP/IP Network Connections

lsof -i    (domain names)
lsof -i -n (ip address)

top

Troubleshoot Network using Network Tools

System -> Administration -> Network Tools

Devices Tab

loopback Interface (lo) 
Protocol IPv4 - 127.0.0.1
Hardware address: Loopback
 
Ethernet Interface (eth0)         
Protocol IPv4  - 192.168.1.x
Hardware address: 00:17:08:5f:dc:73

Wireless Interface (wlan0)         
Protocol IPv4  - 192.168.1.x
Hardware address: 00:17:08:5f:dc:73

Ping Tab

ping 127.0.0.1

Netstat Tab

Determine gateway 192.168.1.x
ping gateway
ping 8.8.8.8 (google-dns)

Lookup Tab - DNS Records

lookup 208.17.81.205 (well.com)
lookup well.com (default information)
lookup well.com (Mailbox Exchange)

Traceroute Tab

traceroute 74.125.225.48 (google.com)
traceroute google.com
traceroute 208.17.81.205 (well.com)
traceroute well.com

Network Manager Enable

System -> Preferences -> Startup Applications
EDIT = nm-applet --sm-disable

top

Network Adapters we Recommend

PCI Adapter

AZIO AWD154B (802.11G Wireless PCI Adapter)

USB Adapter

Linksys Wireless-G USB Network Adapter with SpeedBooster v2

Dial-Up Configuration

Whizcoho – DIAL-UP

user = freegeek@whiz.to
pw = test123
Gresham Number: 503-465-4055
503 974-0040

503 647-5957 – support

http://wiki.freegeek.org/index.php/Dialup_configuration

etc/ppp/pap-secrets
#	*	password
“bbooth76”	*	‘barbwies”

freegeek\@wiz\.to		*	test123
bbooth76\@whiz\.to	*	jlister

top

SSH

Generating a key pair

ssh-keygen -t dsa
http://support.suso.com/supki/SSH_Tutorial_for_Linux

some ssh commands

ssh -p 443 bob@oem (server listening on port 443)

NFS - Network File Sharing (install server)

YouTube-ServerSide

SettingUpNFS

top

install nfs-server

sudo apt-get install nfs-kernel-server

Create dir to export (share)

sudo mkdir FolderName (root)
umask = 0022 / permissions = 755
sudo chmod 777 file1

Create local settings such as ...

POSIX permissions (owner and group)

The most restrictive combo of Local and NFS permissions is what applies.

If a folder has full permissions locally (777)
but I export that folder as (ro) instead if (rw), 
My actual permissions are read-only.

Add dir you wish to share to /etc/exports file

cat /etc/exports
sudo nano /etc/exports
(add the following lines)

/dir/FolderName1 192.168.1.7/255.255.255.0(rw,sync)
/dir/FolderName2 x.x.x.x/x.x.x.x(ro,sync)

Export the file system

sudo exportfs -a

Restart the NFS daemon

sudo /etc/init.d/nfs-kernel-server restart

NFS - Network File Sharing (install client)

YouTube-ClientSide

Install client tools for mounting NFS file system

sudo apt-get install nfs-common

Mount network shares with nfs4

sudo mount -t nfs4 -o proto=tcp,port=2049 RemoteHostIP:/dir/ShareName LocalFolder
(LocalFolder on client)

top

SAMBA Part 1 of 4

SAMBA uses (SMB) "Session Message Block"
SAMBA uses (CIFS) "Common Internet File System"

Install SAMBA

sudo apt-get install samba

Edit the Configuration File

[ALT + F2] then 
gksudo gedit/etc/samba/smb.conf
  
search for "workgroup" workgroup = WORKGROUP
personalized to something like workgroup = sjnWorkgroup

find "security = user" and uncomment

At bottom of Config file create a "share" such as ...

[sjnPUBLIC]
comment = Public files shared on "name of server"!
comment = Public files shared on bob scott (that's server bob and server scott)
path = /sjnPUBLIC
guest ok = yes (can browse without authentication)
browseable = yes
read only = yes
#create mask = 0000
directory mask = 0000

[sjnREADONLY-EXT4]
comment = Read-only share on bob
path = /sjnREADONLY-EXT4
guest ok = yes (can browse without authentication)
browseable = yes
read only = yes
create mask = 0000
directory mask = 0000

[sjnWRITEABLE-EXT4]
comment = Read-Write share on bob
path = /sjnWRITEABLE-EXT4
guest ok = yes (can browse without authentication)
browseable = yes
read only = no
create mask = 7777
directory mask = 7777

top

Create dir to match SAMBA shares "Name and Permission"

sudo mkdir -v /sjnPUBLIC 
sudo mkdir -v /sjnREADONLY-EXT4
sudo mkdir -v /sjnWRITEABLE-EXT4

Change file permissions to match the config file

sudo chmod 777 /sjnWRITEABLE-EXT4

SAMBA Part 2 of 4

Samba-Part2

Mount necessary partitions and devices

Mount necessary partitions and devices in /etc/fstab 
(unless they are already mounted)

Not necessary if you are only sharing files on the default ...
Ubuntu Linux ext4 root (/)

Is necessary if you want to auto-mount NTFS partitions to share on network

SAMBA Part 3 of 4

Samba-Part3

After modifying files in /etc - restart the daemon

Best to create a SAMBA password
sudo useradd sambauser
sudo passwd sambauser
cat /etc/passwd
sudo smbpasswd -a sambauser

Anytime you modify /etc/samba/smb.conf 
sudo restart smbd (unknown?)
sudo start smbd
sudo restart nmbd

SAMBA Part 4 of 4

==Test1 Access the SAMBA server from Ubuntu client==

FSTAB for SAMBA

Editing the FSTAB pt1
Editing the FSTAB pt2
Editing the FSTAB pt3

top

FSTAB SHARE configure

see Mount HDD to mount a hard-drive

sudo mount to see what is mounted
sudo mount -a to mount all entries in fstab

gksudo gedit /etc/fstab
select Edit -> Preferences -> Editor
create a backup copy before saving file

Example 1. Share on Linux

[path to share]    [mount point] [file-sys] [options]      	             
//IPAddress/share  /mnt/sjnSAMBA   cifs    users,auto,credentials=/sjnLinuxCredentials.txt, (cont)
  noexec,noperm 0 0

sjnLinuxCredentials.txt file to be owned by root (permissions 400) and contain two lines:
username = samba_user
password = samba user password

Example 2. Share on Windows
[path to share]  [mount point] [file-sys]  [options]            [dump][fsck order]
//win_box/share  /mnt/sjnSAMBA  smbfs      rw,credentials=/sjnWinboxCredentials.txt 0 0
NOTE: add username=share.password= to options list on fstab line

File System Category

#File Systems [auto] [ext4] [jfs] [reiser4] [swap] [iso9660] [FAT 32] [NTFS]
#Note [ntfs-3g]necessary for write access

#Network Types - nfs, smb, cifs

List UUID - Universal Unique Identifier

sudo blkid
ls -l /dev/disk/by-uuid

top

Ubuntu Network Configuration Files - Part 1 of 3

config-Part1 config-Part2 config-Part3

@@ Line 12: / Line 12: @@
 {{TOC limit|limit=1}}
 __TOC__
-==DHCP syn ak==
- sudo dhclient
-==Open Ports (view)==
- nmap -P 0 localhost (sudo apt-get install nmap)
-netstat -l
-==TCP/IP Open Connection==
- lsof -i    (domain names)
- lsof -i -n (ip address)
-==DNS (view records)==
- dig well.com
 [[#top|top]]
@@ Line 35: / Line 21: @@
   Reboot Machine
-  Browser Off-line?
+  Is Browser Off-line?
+ Is cable plugged in?
+[[#top|top]]
+=Does computer recognize the Adapter?=
+=Are drivers compatable with Umbuntu?=
-=BASH Shell (TS connection)=
+==lspci==
-==Adapter or Onboard==
-===lspci===
   lspci - Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)
-===lsusb===
+==lsusb==
   lsusb - Bus 001 Device 003: ID 13b1:0026 Linksys
-==DHCP==
+[[#top|top]]
-===DHCP Discover===
- sudo dhclient
- Listening on LPF/eth0/00:17:08:5f:dc:73
- Sending on   LPF/eth0/00:17:08:5f:dc:73
- DHCP-REQUEST of 192.168.1.8 on eth0 to 255.255.255.255 port 67
- DHCPA-CK of 192.168.1.8 from 192.168.1.1
- bound to 192.168.1.8 -- renewal in 36968 seconds.
-[[#top|top]]
+=Troubleshoot Network from CMD line=
-===ifconfig===
+==ifconfig==
   ifconfig
@@ Line 67: / Line 49: @@
         inet addr:192.168.1.7  Bcast:192.168.1.255  Mask:255.255.255.0
-===iwconfig===
+==iwconfig==
   iwconfig
@@ Line 74: / Line 56: @@
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:18:01:FE:AB:AC
-==Ping (gateway)==
+[[#top|top]]
+==Ping Test==
   ping localhost 127.0.0.1
@@ Line 80: / Line 64: @@
   ping gateway (route -n)
-  ping 74.125.225.48 (google.com)
+  ping 8.8.8.8 (google.com)
+ ping well.com
+ traceroute well.com (if installed)
-[[#top|top]]
+==DHCP Discover==
+ sudo dhclient
+ Listening on LPF/eth0/00:17:08:5f:dc:73
+ Sending on   LPF/eth0/00:17:08:5f:dc:73
+ DHCP-REQUEST of 192.168.1.8 on eth0 to 255.255.255.255 port 67
+ DHCPA-CK of 192.168.1.8 from 192.168.1.1
+ bound to 192.168.1.8 -- renewal in 36968 seconds.
 ==DNS (view records)==
+ dig well.com (DNS NS + A records no MX records)
-  Dig well.com (DNS NS + A records no MX records)
+==View Open Ports==
+  nmap -P 0 localhost (sudo apt-get install nmap)
+==View Open TCP/IP Network Connections==
+ lsof -i    (domain names)
+ lsof -i -n (ip address)
- ping well.com
+[[#top|top]]
- traceroute well.com (if installed)
-=Network Tools (TS Connection)=
+=Troubleshoot Network using Network Tools=
   System -> Administration -> Network Tools
@@ Line 106: / Line 105: @@
   Protocol IPv4  - 192.168.1.x
   Hardware address: 00:17:08:5f:dc:73
-[[#top|top]]
 ==Ping Tab==
@@ Line 115: / Line 112: @@
   Determine gateway 192.168.1.x
   ping gateway
-  ping 74.125.225.48 (google.com)
+  ping 8.8.8.8 (google-dns)
 ==Lookup Tab - DNS Records==
@@ Line 128: / Line 125: @@
   traceroute well.com
-=Network Manager =
+=Network Manager Enable=
   System -> Preferences -> Startup Applications
   EDIT = nm-applet --sm-disable
@@ Line 134: / Line 131: @@
 [[#top|top]]
-=Network Cards=
+=Network Adapters we Recommend=
- ==PCI Adapter==
+==PCI Adapter==
   AZIO AWD154B (802.11G Wireless PCI Adapter)
@@ Line 141: / Line 138: @@
   Linksys Wireless-G USB Network Adapter with SpeedBooster v2
-==Dial-Up==
+=Dial-Up Configuration=
-*Whizcoho – DIAL-UP
+==Whizcoho – DIAL-UP==
   user = freegeek@whiz.to
@@ Line 162: / Line 159: @@
 [[#top|top]]
-==About ssh==
+=SSH=
-===Generating a key pair===
+==Generating a key pair==
   ssh-keygen -t dsa
   http://support.suso.com/supki/SSH_Tutorial_for_Linux
-===some ssh commands===
+==some ssh commands==
   ssh -p 443 bob@oem (server listening on port 443)

Difference between revisions of "User:Scott/04"

Revision as of 00:59, 12 January 2012

Reset Modem and Router

Does computer recognize the Adapter?

Are drivers compatable with Umbuntu?

lspci

lsusb

Troubleshoot Network from CMD line

ifconfig

iwconfig

Ping Test

DHCP Discover

DNS (view records)

View Open Ports

View Open TCP/IP Network Connections

Troubleshoot Network using Network Tools

Devices Tab

Ping Tab

Netstat Tab

Lookup Tab - DNS Records

Traceroute Tab

Network Manager Enable

Network Adapters we Recommend

PCI Adapter

USB Adapter

Dial-Up Configuration

Whizcoho – DIAL-UP

SSH

Generating a key pair

some ssh commands

NFS - Network File Sharing (install server)

install nfs-server

Create dir to export (share)

Create local settings such as ...

POSIX permissions (owner and group)

Add dir you wish to share to /etc/exports file

Export the file system

Restart the NFS daemon

NFS - Network File Sharing (install client)

Install client tools for mounting NFS file system

Mount network shares with nfs4

SAMBA Part 1 of 4

Install SAMBA

Edit the Configuration File

Create dir to match SAMBA shares "Name and Permission"

Change file permissions to match the config file

SAMBA Part 2 of 4

Mount necessary partitions and devices

SAMBA Part 3 of 4

SAMBA Part 4 of 4

FSTAB for SAMBA

FSTAB SHARE configure

Example 1. Share on Linux

File System Category

List UUID - Universal Unique Identifier

Ubuntu Network Configuration Files - Part 1 of 3

Navigation menu

Search