Looking at an object

STEPS	NOTES AND DETAILED INSTRUCTIONS
Determine what kind of Device it is	There are several categories of devices; networking, PC components, electronic accessories, audio/visual devices, and lots of miscellanea. Because free Geek has a multitude of devices donated it is important that we identify each device before testing. If you cannot identify the device please look it up using the research laptop located in advanced testing. Start with a simple Google search. You can type in the name of the object (usually found on the front or back of the casing) if it is available, or try an identifying number such as a serial or product code. If a Google search does not provide an adequate result, you can try checking the manufacturer's webpage, EBay, and other similar web resources. If you still cannot identify the item, take it to a knowledgeable staff member in Hardware Testing and they will attempt to assist you.
Determine the level of demand for the item in the Thrift Store	Check the Whiteboard. In an open Firefox browser, click where the toolbar says "Whiteboard." You can also find it here: Whiteboard. This will tell you the level of demand the store has on that day. Start with items that have the highest demand in the Thrift Store. This will help the Store maintain their inventory as well as help us test the items most likely to be sold in the order of their importance. Things we don't test Firewall/VPN devices Recycle anything not needed by the store, and any of the above items which we do not test.
Check for Damage	Now that you have identified the type of item you have ***Look at the item*** If there's dirt or grime wipe it down with a rag and some cleaning solution. Does the item have any rough edges? Does the item have any broken or missing case parts? Does the item have any wireing attached? If so are any of the attached wires melted, cut or striped of the plastic covering?
Check for Power On	When checking for what type of Power is needed for the item look at the back of the item. There will be a listing of what Voltage & Amperage is needed. Look at the barrel, make sure you are using the correct size. Does the barrel have reverse polarity? Have an instructor check to make sure you have the correct power supply for the device you are using.
Test the Device	Look up the correct procedure for testing the device you are holding. If you cannot find the correct procedure in the Wiki plase ask an instructor for help.
Final Preparation	Affix a "Tested By" sticker with your initials on the device. Place in the "Store" box. If it is the last device you're testing for the day, please clean up the testing station, putting away tools, cables and everything else.