Installing FGdb
STOP
FGdb is in the middle of a big move, so these instructions only apply to really old versions of the codebase. Please contact User:stillflame or User:rfs to find out how to use this software.
Quick Guide
User:stillflame is putting this here to help, though there will be a shortage of details.
- Dependencies:
- php4
- apache
- postgresql
- smarty
- adodb
- php4-pgsql
- Database
- put all the sql files from sql/ into a database, schema first, 1.0 first
- Config
- put conf/* into /etc/fgdb/
- modify to taste
- Install
- put the lib and php directories under your webroot, or thereabouts
- point your browser to the php dir
Old Instructions
FGdb is actively being developed. There are some quirks in getting it up and running that will get worked out over time. For now, however, these instructions should let anyone with a FreekBox or a FreeGeek baseserver install without too much trouble. For those without such a box, these instructions might also be useful. (In that case, you'll want to start with a standard sarge based debian install, and you may need to run down some extra dependencies.)
Set up
- Start with a FreekBox or a base server from Free Geek. (Since this is based on debian sarge, any sarge box should do, but there might be additional packages you need to install.)
- Become root
- Change the hostname of your freekbox to something you want. (For the some of the examples in these instructions, we use the name 'database' as the hostname.):
# hostname YOUR_HOSTNAME_HERE
and edit /etc/hostname to match.
- Then edit /etc/hosts to say YOUR_HOSTNAME_HERE instead of freekbox as well.
- Bring up networking
# ifup eth0
Package installation
- Now update and install all the needed packages:
# apt-get update # apt-get install smarty libphp-adodb php4 apache vim postgresql postgresql-client php4-pgsql rsync
(You don't really need vim in there, but I find it easier to use than the nvi or whatever is already on the FreekBox.) The above commands will pull in dependencies, depending on what you already have installed on the box.
- You can allow the install to reconfigure apache to use PHP or do it yourself according to instructions.
Apache configuration
- Now make *certain* that apache is configured correctly by editing /etc/apache/httpd.conf.
Uncomment the lines:
AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps
Now make sure the document root is set to:
DocumentRoot /var/www/html
And be sure to include index.php in your directory index:
DirectoryIndex index.php index.html index.htm index.shtml index.cgi
- Save your changes, and then perform this SANITY CHECK:
database:/etc/apache# grep php httpd.conf LoadModule php4_module /usr/lib/apache/1.3/libphp4.so DirectoryIndex index.php index.html index.htm index.shtml index.cgi # distribution - see http://www.php.net) will typically use: #AddType application/x-httpd-php3 .php3 #AddType application/x-httpd-php3-source .phps AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps
- If your config files doesn't look something like that, fix it before proceeding.
- Also, make sure that this line exists and is uncommented (on a sarge box, this is in /etc/apache/modules.conf):
LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
Getting FGdb
- Now check out the fgdb and fglib projects from CVS. Here's a "read-only" way:
Create a temporary directory (I did this in root's home):
# cd # mkdir freegeekdatabase # cd freegeekdatabase
Now check out the projects:
# cvs -d :pserver:anoncvs@cvs.freegeek.org:/var/lib/cvs co fgdb fglib
- At this point, you might want to look at the version of this documenation (in the fgdb/doc directory) to see if it's changed at all.
Installing and configuring FGdb
- Go to the fglib directory and run the install script
# cd fglib # ./install.sh
- Go to the fgdb directory and run the install script
# cd ../fgdb # ./install.sh
- The installation script will create a configuration directory called /etc/fgdb/. Go to that directory:
# cd /etc/fgdb
- There should be two files there (db.inc.php and fgdb.inc.php). If they're not there, copy them in from the conf directory of the fgdb project.
fgdb.inc.php:
<?php $mode='TEST'; $base_url='http://flowers/fgdb'; $howto_base = 'http://web.freegeek.org/howto'; ?>
db.inc.php:
<?php $dbtype='postgres'; $hostname='localhost'; $userid='DB_USERNAME_HERE'; $passwd='DB_PASSWORD_HERE'; $database='DB_NAME_HERE'; ?>
Getting the database set up
- After editing the above files, so that the placeholders contain your real values, the software is now installed and configured. However, you need to get the database itself set up.
Prepping postgresql for FGdb
- There are some triggers and stored procedures that require the plpgpsql language to be set up. For now, we assume that this has already been done globally. If not, you need to run this command:
createlang plpgsql template1
- create a user with database creation privileges, for instance. (The user does not need to be able to create new users or databases):
createuser fgdb
- create a database as that user
createdb fgdb
Configuring postgresql
- As root you'll need to give access to your new user to the database. To do this, you'll need to modify the
/etc/postgresql/pg_hba.conf file. At the tail end of the file, something like this should work. (This is probably not secure enough, and it's beyond the scope of this article to advise you on how to set postgresql up most securely.)
# All other connections by UNIX sockets #local all all ident sameuser local all all trust # # All IPv4 connections from localhost #host all all 127.0.0.1 255.255.255.255 ident sameuser host all all 127.0.0.1 255.255.255.255 trust
Now restart postgresql for the changes to take effect:
/etc/init.d/postgresql restart
Populating the database
If you want to have a test database for development purposes, you will need to have created a user with your same login name, then:
cd sql ./createtestdb
If you want to have a production database, empty and waiting for your data, then (using the username and database name you chose):
cd sql psql -U fgdb fgdb < database_schema.pg.sql >& /tmp/database_schema4.pg.sql for i in metadata/*sql; do psql -U fgdb -f $i fgdb; done
Configuring PHP
- Edit php.ini to have the correct include_path:
# cd /etc/php4/apache/ # vi php.ini include_path = ".:/var/www/php/includes:/usr/share:/usr/share/php:/usr/lib"
Final touches
- Now, restart apache
# /etc/init.d/apache restart Reloading apache modules[Wed Mar 17 17:39:29 2004] [alert] apache: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
- Point your browser to the database: http://YOUR_HOSTNAME_HERE
- That should show you the main page to the FGdb database application.