Laptop Network Boot Guide

From FreekiWiki
Revision as of 16:33, 21 May 2014 by AshleySueMas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


Link

APPENDIX GUIDE A-2

How to Access the Free Geek Laptop Network Boot Menu Tools

☐ Plug in an ethernet cable from the workbench.
☐ Boot into BIOS.
☐ Find the section for setting boot options. Set the following boot order:

First:    Optical Drive
Second:   Hard Drive
Third:    Network Device (also called LAN, Onboard NIC, or PXE)
  • Disable or ignore other devices.

☐ Save changes and exit BIOS.
☐ The laptop should now automatically boot to the Network Boot Menu.

Troubleshooting steps:

  • Check the ethernet cable you are using for damage. These cables are used a lot, and wear out.
  • Double-check your BIOS boot order settings. They may not have saved for various reasons.
  • Check to see if there is a light on the laptop's ethernet port; this light shows that the port recognizes the cable. If you think the port is broken, ask your instructor for help.