Difference between revisions of "3G Mobile Broadband Internet"

From FreekiWiki
Jump to navigation Jump to search
Line 14: Line 14:
  
 
==Unsupported Devices==
 
==Unsupported Devices==
*Not sure yet...
+
*Clear
  
 
==Basic Setup==
 
==Basic Setup==

Revision as of 13:44, 24 September 2010

Supported Devices

  • A600 (cricket)
  • UTStarcom UM100C (cricket)
  • UM185C (cricket)
  • U300 (Sprint)
  • USBConnect Lightnight/Sierra Wireless (AT&T)
  • Cricket Series S/ Sierra Aircard 250U

Easy way (10.04)

sudo apt-get install usb-modeswitch usb-modeswitch-data
  • Don't forget to reboot

Unsupported Devices

  • Clear

Basic Setup

In Ubuntu 9.10 some cards will work automatically after running the mobile broadband wizard in the network manager. This option only shows up when ubuntu detects a mobile broadband card, some devices will need additional setup, in which case you should check if there are specific instructions for your card.

Notes

  • Before some cards will work, they need to be activated on a Windows on Mac system. If a card is detected in ubuntu but wont connect, it probably hasnt been activated yet.
  • If a card is not specifically listed here, then we dont know if it works.

Installing Cricket Series S/ Sierra Aircard 250U

The Cricket Series S is a 3G/4G device combining a Sierra 3G usb device and a Beceem 4G device. ATM the 4G device doesn't have any Linux drivers but the 3G device works. The device is switched correctly after installing usb-modeswitch and usb-modeswitch-data but the driver for the 3G device still isn't loaded correctly. There probably a better way to do this but this is the only solution I have found.

sudo nano /etc/modules
option
sudo nano /etc/rc.local
echo "1199 0301" > /sys/bus/usb-serial/drivers/option1/new_id

Easy Method for Installing A600

Step 1: Download the .deb file & install it: http://freegeek.errtech.com/cricket/cricket_flip_i386.deb

Step 2: Download flipflop.sh: http://freegeek.errtech.com/cricket/flipflop.sh

Now right click on the file and select "properties". Click over to the "permissions" tab, and check the box "allow executing file as a program". Now double click it and select "Run", enter your password. Wait a few moments and poof! Your 3g modem should now be appearing in your network manager.

  • You will need to run the .sh file every time you connect your modem.

Easy Method for Installing UM185C

Step 1: Download the .deb file & install it: http://freegeek.errtech.com/cricket/cricket_flip_i386.deb

Step 2: Download cricketum185c.sh http://freegeek.errtech.com/cricket/cricketum185c.sh

Now we just need to execute the cricketum185c.sh, it is in the directory of files you extracted, by running the following: Code:

chmod +x cricketum185c.sh
sudo ./cricketum185c.sh

Installing from Source for automatic switching (A600 Only)

Building the newest version of usb_modeswitch (1.1.0) is slightly more involved but should enable your A600 modem to be automatically switched using udev instead of having to run the flipflop.sh script every time you plug the device in.


Step 1:

Download the source archive (http://www.draisberghof.de/usb_modeswitch/usb-modeswitch-1.1.2.tar.bz2) and extract the contents to your preferred directory.

Open up terminal and use cd to change into the directory of the extracted files.

cd usb-modeswitch-1.*

Step 2:

Install the dependencies required to make usb_modeswitch.

sudo apt-get install build-essential libusb-dev

Step 3:

Install usb_modeswitch.

sudo make install

Step 4:

Download the data archive (http://www.draisberghof.de/usb_modeswitch/usb-modeswitch-data-20100418.tar.bz2) and extract the contents to your preferred directory.

Open up terminal and use cd to change into the directory of the extracted files.

cd usb_modeswitch-data*

Step 5:

Install usb_modeswitch-data

sudo make install

Step 6:

Plug in your Cricket A600 to an open USB port, wait a moment for it to be detected and for usb-modeswitch to do it's magic. Your device should now show up in network-manager. You may need to restart your computer for it to work.

Trouble Shooting

If at this point your device is not appearing in network-manager you should:

sudo make uninstall

and use the instructions under 3G Mobile Broadband Internet#Easy Method for Installing A600

Before this guide will work for you, you do need to load the device on a Windows/Mac system and install the software for the device and activate it. (I have a Windows VM for just such occasions, it worked fine)

If this guide does not work for you try first opening up the flipflop.sh and increasing the sleep time from 10 seconds to 20 - some systems require a longer delay.

If the card establishes a connection to cricket, but is not able to ping (or do anything else), it may require an update. The quickest way to do this is using a Mac system (which already has the software installed).