Facility

Maintainance Logs

Fire Extinguishers

Vendor

United Fire & Safety

xxxxx N MLK Blvd.

Portland, OR 972xx

FE Log

Inspection tags good for one year.

Location	Type	Inspection Date
Lab	ABC	December 2004
Kitchen	ABC	December 2004
Build	ABC	December 2004
Printerland	ABC	December 2004
Evaluation	ABC	December 2004
Recycling	ABC	December 2004

HVAC

UNIT INFO

[units listed from north to south]

UNIT ONE [Warehouse]

Located in the Warehouse, next to the door from Advanced Testing.

Thermostat is manual, on west side of a pillar, near the front, obscured by shelving.

Day & Night Co. Model 394GAW060175

Gas Unit with no Air Conditioning. Gas line runs through Black Hole, then along back wall through Eval, Build, :Back Stage, and out near rollup door. Facing meters, it is the one on the right.

Gas valves are located at the unit and at the meter.

Electrical switch is at the unit. Electical is fed from ?

UNIT TWO [Receiving]

Located in the attic space above Receiving, with air conditioning condenser on roof.

Thermostat is programable, on west wall of Receiving.

Electric Furnace, fed from?

Currently disabled, pending attic area remodel. ( noted 10/15/06)

FILTERS

Vendors

Honke Heating, Gresham, 503-666-3725

Fred Meyer

True Value Hardware

Filter Log

Filters should be changed 2 times per year.

Location	Size	Date
Unit One: Warehouse	??x??	???
Unit Two: Receiving	??x??	???
Unit Three: Eval	??x??	???
Unit Four: Admin	??x??	June 2004
Unit Five: Store	??x??	???
Unit Six: Classroom	??x??	???
Unit Seven: Meeting Room	??x??	???

upstairs remodel

Purpose

The purpose of the remodel is to finish the floor in old printerland.

The project is funded by a personal grant for the classic gaming library.

Scope of work to be done

We are going to add floor Joists to strengthen the structure of the floor and add flooring to the rest of the space. The work will be done to code specifications. The furnace will be relocated and duct work rerouted as needed.

To do Tasks

• clear all equipment from work area
  • store in big classroom
• roll up insulation and bag for reinstallation
  • Store in big classroom
• reroute electrical
• uninstall furnace
• remove existing blocking
• add new joists and shore up beams
  • allow for Cable infrastructure (cable trays and trap door access)
    • Cable for Network
• blocking reinstalled where needed
• HVAC ducting in floor
• Sheet floor
• vented Closet for Heating
• Add walls
  • at least one wall to contain the CGL
• Move equipment from platform (museum)
• remove floor 1x12 existing
• sheet floor