Difference between revisions of "Getting the Processor Information"

From FreekiWiki
Jump to navigation Jump to search
m (Victor's corrections to the Spanish)
(remove outdated spanish text)
Line 38: Line 38:
 
     proc            [label="Does it probably have a\nPROCESSOR?",
 
     proc            [label="Does it probably have a\nPROCESSOR?",
 
                     label_es="¿El sistema tiene un\nPROCESADOR?"]
 
                     label_es="¿El sistema tiene un\nPROCESADOR?"]
     heatsink_fan    [label="Does it have a\n HEAT SINK and/or FAN?",
+
     heatsink_fan    [label="Does it have a\n HEAT SINK and/or FAN?"]
                    label_es="¿Tiene esto un\nPROCESADOR?"]
 
  
 
     procinfo        [label="Can you get the \nPROCESSOR INFORMATION?",
 
     procinfo        [label="Can you get the \nPROCESSOR INFORMATION?",
Line 59: Line 58:
  
 
     good_mobo      [label="Does the motherboard\nhave DDR slots\nand SATA ports?",
 
     good_mobo      [label="Does the motherboard\nhave DDR slots\nand SATA ports?",
                     label_es="¿Tiene la tarjeta madre\nDDR slots?"]
+
                     label_es="¿Tiene la tarjeta madre\nDDR slots y .... ?"]
  
 
     not_done      [label="You're not done yet!",
 
     not_done      [label="You're not done yet!",

Revision as of 17:49, 26 April 2011

GREEN Chart

This is a graph with borders and nodes. Maybe there is an Imagemap used so the nodes may be linking to some Pages.

Checking the Cables and Connections

  • Is the power strip on?
  • Is the computer plugged into the power strip?
  • Is the power switch on the back of the power supply on?
  • Is the power supply plugged into the motherboard?
    • Some motherboards have a 4 pin connector (as well as the 20 or 24 pin connector). Make sure that this is also plugged in properly.
  • Is the power switch connected to the motherboard?

Alternative method for determining the processor information

This is your last resort option. Do not do this unless the instructions told you to.

  • Is the computer marked with the model number or speed?
    • Use this information. (You may need to google the model number.)
  • If (and only if) that does not work:
    1. Check with an instructor
    2. See if you can see the speed without removing anything
    3. Remove the heat sink/fan only if necessary
    4. You may need a magnifying glass. (See instructor.)

English Version: Getting_the_Processor_Information

Vercion Español: Getting_the_Processor_Information_en_Español