Difference between revisions of "Getting the Processor Information"

Latest revision as of 17:28, 5 July 2014

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)

link

GREEN Chart

Checking the Cables and Connections

Is the power strip on?
Is the computer plugged into the power strip?
Is the power switch on the back of the power supply on?
Is the power supply plugged into the motherboard?
- Some motherboards have a 4 pin connector (as well as the 20 or 24 pin connector). Make sure that this is also plugged in properly.
Is the power switch connected to the motherboard?

Alternative method for determining the processor information

This is your last resort option. Do not do this unless the instructions told you to.

Is the computer marked with the model number or speed?
- Use this information. (You may need to google the model number.)
If (and only if) that does not work:
1. Check with an instructor
2. See if you can see the speed without removing anything
3. Remove the heat sink/fan only if necessary
4. You may need a magnifying glass. (See instructor.)

English Version: Getting_the_Processor_Information

Vercion Español: Getting_the_Processor_Information_en_Español

@@ Line 1: / Line 1: @@
+{{migrated}}
+[https://docs.google.com/document/d/1B45aA9FFSc2d36mG-30wmG9xoCwDEtSlQ7ETdyKQ4fc/edit?usp=sharing link]
 __NOTOC__
 ==GREEN Chart==
@@ Line 9: / Line 11: @@
      addstuff        [label="If needed, add \nRAM, VIDEO\nand/or POWER SUPPLY",
-                      label_es="Si usted necesita, instalar \nRAM, VIDEO\ny/o POWER SUPPLY",
+                      label_es="Si es necesario, instale\nmemoria, video\ny/o fuente de poder",
                       shape="box"]
      bios            [label="Try to\nget into BIOS\nCan you get the\nPROCESSOR INFO?",
                       label_es="Intente\naccesar a BIOS\n¿Puede usted obtener\nla información del PROCESSOR ?"]
-     blowncaps       [label="Can you see any\nBLOWN CAPS?",
+     blowncaps       [label="Can you see any\nBLOWN CAPS?\n(Check Again)",
-                      label_es="¿Puede usted ver alguna\nBLOWN CAPS?"]
+                      label_es="¿Puede ver un\ntransistor quemado o defectuoso?"]
      checkconnect    [label="Check the\ncables and connections\n(see note below).\nDoes it POWER ON?",
-                      label_es="Verifique los\ncables y conecciones\n(Véase nota debajo)\n¿El SISTEMA ENCIENDE?"]
+                      label_es="Verifique los\ncables y conecciones\n(Véase nota abajo)\n¿El SISTEMA ENCIENDE?"]
      checktight      [label="Check to make sure\nall cards and memory sticks are\nproperly seated",
                       label_es="Verifique cuidadosamente que\ntodas las tarjetas y memorias estén\ncorrectamente instaladas",
@@ Line 26: / Line 28: @@
                       label_es="Regrese al\nDIAGRAMA PRINCIPAL",
                       shape="box", style="dashed", color="red", URL="/index.php/System_Evaluation_Overview"]
-     manualdetermine [label="Use an\nALTERNATIVE METHOD\nto determine the proc info",
+     manualdetermine [label="Check in with instructor!\nUse an\nALTERNATIVE METHOD\nto determine the proc info",
                       label_es="Use un\nMETODO ALTERNATIVO\npara obtener la INFO del PROCESADOR",
                       URL="/index.php/System_Evaluation_Overview", shape="box"]
@@ Line 35: / Line 37: @@
                       label_es="¿Despliega alguna\nINFORMACIÓN?"]
      poweron         [label="Does it\nPOWER ON?",
-                      label_es="¿Puede esto\nENCENDER?"]
+                      label_es="¿El sistema \nenciende"]
      proc            [label="Does it probably have a\nPROCESSOR?",
-                      label_es="¿Tiene esto un\nPROCESADOR?"]
+                      label_es="¿El sistema tiene un\nPROCESADOR?"]
+    heatsink_fan    [label="Does it have a\n HEAT SINK and/or FAN?",
+                     label_es="¿El sistema tiene un\nCALENTADOR y/o VENTILADOR?"]
      procinfo        [label="Can you get the \nPROCESSOR INFORMATION?",
                       label_es="¿Puede usted obtener la\nINFORMACIÓN DEL PROCESADOR?"]
-     pull_proc       [label="PULL THE MOTHERBOARD OUT\nand take it to Advanced Testing\nWe are\nRECYCLING\nthis system",
+     pull_mobo       [label="PULL THE MOTHERBOARD OUT\nand take it to Advanced Testing\nWe are\nRECYCLING\nthis system",
-                      label_es="REMUEVA LA TARJETA MADRE\ny llévela a Advanced Testing\nNosotros\nRECICLAMOS\neste sistema",
+                      label_es="REMUEVA LA TARJETA MADRE\ny llévela a Advanced Testing\nNosotros\nRECICLAMOS\neste gabinete",
                       shape="box"]
      simplify        [label="SIMPLIFY\nRemove uneeded cards\nand disconnect the drives\nDoes it POST?",
-                      label_es="SIMPLIFY\nRemueva la tarjetas innecesarias\ny desconecte los drives\n¿Despliega alguna INFORMACIÓN?"]
+                      label_es="Remueva las tarjetas innecesarias\ny desconecte los lectores y disco duro.\nDespliega alguna INFORMACIÓN?"]
      start           [label="START HERE",
                       label_es="INICIAR AQUI",
                       shape="box", style="bold", color="green"]
      swapram         [label="Try a different\nstick of RAM\nDoes it POST?",
-                      label_es="Pruebe una diferente\ntarjeta RAM\n¿Despliega alguna INFORMACIÓN?"]
+                      label_es="Pruebe una diferente\ntarjeta de memoria\n¿Despliega alguna INFORMACIÓN?"]
      swapvideocard   [label="Swap out the VIDEO CARD\nDoes it POST?",
                       label_es="Cambie la tarjeta de VIDEO\n¿Despliega alguna INFORMACIÓN?"]
      testpower       [label="Does the\nPOWER SUPPLY\nwork?\n(Test it)",
-                      label_es="¿Está funcionando\nel\nPOWER SUPPLY?\n(Pruebelo)"]
+                      label_es="¿Está funcionando\nla\nfuente de poder?\n(Pruebelo)"]
+    good_mobo      [label="Does the motherboard\nhave DDR \nand SATA ports?",
+                    label_es="¿Tiene la tarjeta madre\nDDR slots\ny SATA ports?"]
+    not_done       [label="You're not done yet!",
+                     label_es="No esta terminado todavia!"]
      start -> proc
-     proc -> blowncaps [taillabel="YES", taillabel_es="SÍ"]
+     proc -> heatsink_fan [taillabel="YES", taillabel_es="SÍ"]
-     proc -> goback [taillabel="NO"]
+     proc -> not_done [taillabel="NO"]
-     blowncaps -> pull_proc [taillabel="YES", taillabel_es="SÍ"]
+    heatsink_fan -> blowncaps [taillabel="YES", taillabel_es="SÍ"]
-     blowncaps -> addstuff [taillabel="NO"]
+    heatsink_fan -> manualdetermine [taillabel="NO"]
+     blowncaps -> good_mobo [taillabel="YES", taillabel_es="SÍ"]
+     blowncaps -> disconnect [taillabel="NO"]
-     pull_proc -> goback
+     good_mobo -> pull_mobo [taillabel="YES", taillabel_es="SÍ"]
+    good_mobo -> not_done [taillabel="NO"]
-     addstuff -> disconnect
+     pull_mobo -> not_done
-     disconnect -> checktight -> plugin -> poweron
+     disconnect -> addstuff
+    addstuff -> checktight -> plugin -> poweron
@@ Line 83: / Line 100: @@
      procinfo -> bios [taillabel="NO"]
-     procinfo -> goback [taillabel="YES", taillabel_es="SÍ"]
+     procinfo -> not_done [taillabel="YES", taillabel_es="SÍ"]
-     bios -> goback [taillabel="YES", taillabel_es="SÍ"]
+     bios -> not_done [taillabel="YES", taillabel_es="SÍ"]
      bios -> manualdetermine [taillabel="NO"]
@@ Line 97: / Line 114: @@
      swapvideocard -> manualdetermine [taillabel="NO"]
-     manualdetermine -> goback
+     manualdetermine -> not_done
+    not_done -> goback
    }
 </graphviz>

Difference between revisions of "Getting the Processor Information"

Latest revision as of 17:28, 5 July 2014

GREEN Chart

Checking the Cables and Connections

Alternative method for determining the processor information

Navigation menu

Search