Difference between revisions of "Hard Drive Sorting"

From FreekiWiki
Jump to navigation Jump to search
 
(36 intermediate revisions by 6 users not shown)
Line 1: Line 1:
−
[[Category: Prebuild]]
+
{{migrated}}
−
Hard drive sorting is done in [[System Evaluation]]. There should already be a tub for keepers and a bucket for recyclers.
+
[https://docs.google.com/document/d/1E1HKNPjF-dtto-Nm2VroGKd5-mO-5FtmNP9N5tC1YRY/edit?usp=sharing link]
 +
 
 +
Hard drive sorting is done in [[System Evaluation]].
  
 
== Sort ==
 
== Sort ==
−
There should be a bucket filled with drives to be tossed and a tub filled with drives to be kept. These need to be checked for mistakes. (If the tub or bucket is not there, use your best judgment to figure out which is which and go from there.)
+
<graphviz>
 +
digraph D {
 +
    node [fontname="Helvetica", fontsize="11"]
 +
    edge [fontname="Helvetica"]
 +
 
 +
start        [label="START HERE",  shape="box", style="bold"]
 +
ask          [label="ASK",  shape="box", style="bold"]
 +
ask2        [label="ASK",  shape="box", style="bold"]
 +
keep        [label="KEEP",  shape="box", style="bold"]
 +
recycle      [label="RECYCLE",  shape="box", style="bold"]
 +
recycle2    [label="RECYCLE",  shape="box", style="bold"]
 +
fiftypinscsi [label="Is it 50 pin SCSI?"]
 +
scsi        [label="Is it SCSI?"]
 +
reg_size    [label="Is it 3.5in?\n(regular sized)"]
 +
big_size    [label="Is it 5.25in?\n(bigfoot sized)"]
 +
lap_size    [label="Is it 2.5in?\n(laptop sized)"]
 +
sata        [label="Is it SATA?"]
 +
ide        [label="Is it IDE?"]
 +
scsi_cutoff  [label="Is it 140 GB or greater?"]
 +
ide_cutoff  [label="Is it 40 GB or greater?"]
 +
lap_cutoff  [label="Is it 6 GB or greater?"]
 +
 
 +
start -> sata
 +
 
 +
sata -> keep [label="YES"]
 +
sata -> ide [ label="NO" ]
 +
 
 +
fiftypinscsi -> scsi_cutoff [ label="NO" ]
 +
fiftypinscsi -> recycle [label="YES"]
 +
 
 +
ide -> big_size [ label="YES" ]
 +
ide -> scsi [label="NO"]
 +
 
 +
big_size -> reg_size [label="NO"]
 +
big_size -> recycle [label="YES"]
 +
 
 +
scsi -> fiftypinscsi [ label="YES" ]
 +
scsi -> ask2 [ label="NO" ]
 +
 
 +
lap_size -> lap_cutoff [label="YES"]
 +
lap_size -> ask [label="NO"]
 +
 
 +
reg_size -> lap_size  [label="NO"]
 +
reg_size -> ide_cutoff  [label="YES"]
 +
 
 +
scsi_cutoff -> recycle [label="NO"]
 +
scsi_cutoff -> keep [label="YES"]
 +
 
 +
ide_cutoff -> recycle [label="NO"]
 +
ide_cutoff -> keep [label="YES"]
 +
 
 +
lap_cutoff -> recycle2 [label="NO"]
 +
lap_cutoff -> keep [label="YES"]
 +
 
 +
}
 +
</graphviz>
  
 
; List of drives to recycle:
 
; List of drives to recycle:
−
* 3 1/2 inch IDE hard drives marked less than '''20 GB'''
+
* 3 1/2 inch IDE hard drives marked less than '''40 GB'''
−
* 2 1/2 inch IDE hard drives marked less than '''2 GB'''  
+
* 2 1/2 inch IDE hard drives marked less than '''6 GB'''  
 
* 5 1/4 inch IDE hard drives, regardless of capacity ''(these are known as "Bigfoot" drives)''
 
* 5 1/4 inch IDE hard drives, regardless of capacity ''(these are known as "Bigfoot" drives)''
 +
* SCSI drives marked less than '''72 GB'''
 +
* 50 pin SCSI drives
 
* MFM hard drives ''(very old, see example)''
 
* MFM hard drives ''(very old, see example)''
  
 
; List of drives to keep:
 
; List of drives to keep:
−
* 3 1/2 inch IDE hard drives marked '''10 GB or bigger'''
+
* 3 1/2 inch IDE hard drives marked '''40 GB or bigger'''
−
* all SCSI hard drives in the keep tub
+
* SCSI drives marked '''140 GB or bigger'''
−
* 2 1/2 inch IDE hard drives marked '''2 GB or bigger'''  
+
* 2 1/2 inch IDE hard drives marked '''6 GB or bigger'''  
  
 
; When in doubt keep the drive.
 
; When in doubt keep the drive.
  
 
; Steps when Sorting
 
; Steps when Sorting
−
# First, check the '''toss bucket''' for Drives that should be kept:
+
# First, check the '''recycle''' crate for drives that should be '''kept''':
−
#* check the drives for hammer marks, if there are none see if they are on the keep list
+
# Then check the '''incoming''' crate for drives that should be '''kept or recycled''':
−
#* put keepers in the "keep tub"
+
# Put any keepers in the TARDIS in the incoming drive area (near the door).
−
# Next, check the '''keep tub''' for ones that should be recycled:
+
# Destroy any recyclers using the '''hard drive crank'''.
−
#* check the drives for hammer marks, if there are none see if they are on the keep list
+
#* Ask someone in charge to check them before destroying the "recyclers" (even if you think you know how), and ask about the ones you think you want to keep.
−
#* put keepers in (back in) the "keep tub"
+
# Stack recyclers in the crates. When crates are 75% full, put them on the cart to go to the warehouse.
−
# Create a temporary place for a recycle pile and put hard drives marked '''Not keep''' in it.
 
−
# Ask someone in charge how to hammer the "not keep drives" (even if you think you know how), and ask about the ones you think you want to keep.
 
−
# hammer the drives as directed
 
−
# Put all the recyclers in the bucket and all the keepers in the tub.
 
  
 
== How to tell a hard drive's capacity ==
 
== How to tell a hard drive's capacity ==
Line 54: Line 109:
 
: Try [http://google.com/ googling] the model number and see if anything turns up.
 
: Try [http://google.com/ googling] the model number and see if anything turns up.
  
−
== Jumpering the Hard Drives ==
+
== Where to put them ==
−
Keepers should be jumpered to "cable select" if such a setting is available. Otherwise, they should be jumpered to "master".
+
* Hard drives in the Recycle bucket go straight to Recycling after they are signed off by the Eval instructor and suitably '''whacked, drilled or squished'''.
−
 
+
* Good Hard Drives go into the TARDIS
−
Western digital drives (and some others) differentiate between single (or standalone) and master. On most western digitals, no jumpers (or the jumper in the parking position) is the single setting and is what is preferred at Free Geek.
 
  
−
Most drives document the various jumper settings on the drive label somewhere.
 
  
−
Feel free to ask for further instructions on how hard drives are jumpered.
 
  
−
== Where to put them ==
+
[[Category: System Evaluation]]
−
* Hard drives in the Recycle bucket go straight to Recycling after they are signed off by the Eval instructor and suitably '''whacked with a hammer'''. There is no need to receive or label them.
 
−
* Good Hard Drives go into the TARDIS (Build Office).
 

Latest revision as of 16:48, 5 July 2014

deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


link

Hard drive sorting is done in System Evaluation.

Sort

This is a graph with borders and nodes. Maybe there is an Imagemap used so the nodes may be linking to some Pages.

List of drives to recycle
  • 3 1/2 inch IDE hard drives marked less than 40 GB
  • 2 1/2 inch IDE hard drives marked less than 6 GB
  • 5 1/4 inch IDE hard drives, regardless of capacity (these are known as "Bigfoot" drives)
  • SCSI drives marked less than 72 GB
  • 50 pin SCSI drives
  • MFM hard drives (very old, see example)
List of drives to keep
  • 3 1/2 inch IDE hard drives marked 40 GB or bigger
  • SCSI drives marked 140 GB or bigger
  • 2 1/2 inch IDE hard drives marked 6 GB or bigger
When in doubt keep the drive.
Steps when Sorting
  1. First, check the recycle crate for drives that should be kept:
  2. Then check the incoming crate for drives that should be kept or recycled:
  3. Put any keepers in the TARDIS in the incoming drive area (near the door).
  4. Destroy any recyclers using the hard drive crank.
    • Ask someone in charge to check them before destroying the "recyclers" (even if you think you know how), and ask about the ones you think you want to keep.
  5. Stack recyclers in the crates. When crates are 75% full, put them on the cart to go to the warehouse.

How to tell a hard drive's capacity

Many hard drives are marked with their capacity. The words might be very small, but they're usually there. Look carefully for them. If that doesn't work:

Look for double labeled drives
Some drives have two labels. One generic label lists several different capacities and/or disk geometry. The other label is model specific and lists the model number. For instance one label might say:
MPC3032AT (3.24GB)
MPC3043AT (4.32GB)
MPC3064AT (6.48GB)
MPC3084AT (8.45GB)
MPC3096AT (9.74GB)
The other label says:
Model MPC3032AT
The drive is a 3.24 GB drive
Look for model number schemes
Some model numbers contain a hint as to the capacity of the drive. For instance, the western digital drives can usually be deduced by dropping the first digit in the model number. In the example above MPC3032AT is approximately a 3.2 GB drive and MPC3043AT is approximately a 4.3. Thus we can determine that the third and fourth digit in the four digit number is the drive size. By comparing similar models, you might be able to determine the probable sizes.
Google is your friend.
Try googling the model number and see if anything turns up.

Where to put them

  • Hard drives in the Recycle bucket go straight to Recycling after they are signed off by the Eval instructor and suitably whacked, drilled or squished.
  • Good Hard Drives go into the TARDIS
Retrieved from "http://wiki.freegeek.org/index.php?title=Hard_Drive_Sorting&oldid=70682"