FGdb is actively being developed. There are some quirks in getting it up and running that will get worked out over time. For now, however, these instructions should let anyone with a FreekBox install without too much trouble. For those without a FreekBox, these instructions might also be useful. (In that case, you'll want to start with a standard woody based debian install, and you may need to run down some extra dependencies.)

NOTE: This still refers to a lot of MySQL stuff. We're now using PostgreSQL and will need to change all that.

Set up

Start with a FreekBox or a base server from Free Geek. (Since this is based on debian sarge, any sarge box should do, but there might be additional packages you need to install.)
Become root
Change the hostname of your freekbox to something you want. (For the some of the examples in these instructions, we use the name 'database' as the hostname.):

# hostname YOUR_HOSTNAME_HERE

and edit /etc/hostname to match.

Then edit /etc/hosts to say YOUR_HOSTNAME_HERE instead of freekbox as well.
Bring up networking

database:/etc/apache# ifup eth0

Package installation

Now update and install all the needed packages:

database:/etc/apache# apt-get update
database:/etc/apache# apt-get install smarty libphp-adodb php4 apache vim postgresql postgresql-cliend php4-mysql php4-pgsql rsync

(You don't really need vim in there, but I find it easier to use than the nvi or whatever is already on the FreekBox.) The above commands will pull in dependencies, depending on what you already have installed on the box.

You can allow the install to reconfigure apache to use PHP or do it yourself according to instructions.

Apache configuration

Now make *certain* that apache is configured correctly by editing /etc/apache/httpd.conf.

Uncomment the lines:

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

Also, uncomment the line:

LoadModule php4_module /usr/lib/apache/1.3/libphp4.so

Now make sure the document root is set to:

DocumentRoot /var/www/html

And be sure to include index.php in your directory index:

DirectoryIndex index.php index.html index.htm index.shtml index.cgi

Save your changes, and then perform this SANITY CHECK:

database:/etc/apache# grep php httpd.conf
LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
   DirectoryIndex index.php index.html index.htm index.shtml index.cgi
   # distribution - see http://www.php.net) will typically use:
   #AddType application/x-httpd-php3 .php3
   #AddType application/x-httpd-php3-source .phps
   AddType application/x-httpd-php .php
   AddType application/x-httpd-php-source .phps

If your config files doesn't look something like that, fix it before proceeding.

Getting FGdb

Now check out the fgdb and fglib projects from CVS. Here's a "read-only" way:
- Create a temporary directory (I did this in root's home):

database:/etc/apache# cd ~
database:/etc/apache# mkdir freegeekdatabase
database:/etc/apache# cd freegeekdatabase

- Now check out the projects:

database:/etc/apache# cvs -d :pserver:anoncvs@cvs.freegeek.org:/var/lib/cvs co fgdb fglib

At this point, you might want to look at the version of this documenation (in the fgdb/doc directory) to see if it's changed at all.

Installing an configuring FGdb

Go to the fglib directory and run the install script

database:/etc/apache# cd fglib
database:/etc/apache# ./install.sh

Go to the fgdb directory and run the install script

database:/etc/apache# cd ../fgdb
database:/etc/apache# ./install.sh

The installation script will create a configuration directory called /etc/fgdb/. Go to that directory:

database:/etc/apache# cd /etc/fgdb

There should be three files there (db.inc.php fgdb.inc.php fgdbconnection.php). If they're not there, copy them in from the conf directory of the fgdb project.
- fgdb.inc.php:

<?php
$mode='TEST';
$base_url='http://flowers/fgdb';
$howto_base = 'http://web.freegeek.org/howto'; 
?>

- db.inc.php:

<?php
$dbtype='mysql';
$hostname='localhost';
$userid='DB_USERNAME_HERE';
$passwd='DB_PASSWORD_HERE';
$database='DB_NAME_HERE';
?>

- fgdbconnection.php:

<?php
require_once("/etc/fgdb/db.inc.php");
require_once("adodb/adodb.inc.php");
require_once("adodb/drivers/adodb-mysql.inc.php");
global $userid, $passwd; 
//
// FGDBConnection
//
class FGDBConnection extends ADODB_mysql
{
   // override the generic member var connection parameters
   // with Free Geek DB specific ones
   var $database = "DB_NAME_HERE";
   var $host = "localhost";
   var $user = 'DB_USERNAME_HERE';
   var $password = 'DB_PASSWORD_HERE';
   var $dbtype = "mysql";
}
?>

Getting the database set up

After editing the above files, so that the placeholders contain your real values, the software is now installed and configured. However, you need to get the database itself set up.

database:/etc/apache# mysql
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 3 to server version: 3.23.49-log

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

mysql> create database DB_NAME_HERE;
Query OK, 1 row affected (0.00 sec)

mysql> GRANT ALL PRIVILEGES ON DB_NAME_HERE.* TO 'DB_USERNAME_HERE'@'localhost' IDENTIFIED BY 'DB_PASSWORD_HERE' WITH GRANT OPTION;

Query OK, 0 rows affected (0.01 sec)

Now populate the database:

database:~# cd ~/freegeekdatabase/fgdb/sql/
database:~/freegeekdatabase/fgdb/sql# mysql DB_NAME_HERE < fgdbinit.sql

Edit php.ini to have the correct include_path:

database:/etc/apache# cd /etc/php4/apache/        
database:/etc/php4/apache# vi php.ini
include_path = ".:/var/www/php/includes:/usr/share:/usr/share/php:/usr/lib"

Final touches

Now, restart apache

database:/etc/apache# /etc/init.d/apache restart
Reloading apache modules[Wed Mar 17 17:39:29 2004] [alert]
apache: Could not determine the server's fully qualified domain
name, using 127.0.0.1 for ServerName

Point your browser to the database: http://YOUR_HOSTNAME_HERE/fgdb/
That should show you the main page to the FGdb database application.

Installing FGdb

Contents