Difference between revisions of "Labeling and tallysheets for keeper systems"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
: Write the Gizmo ID number from the receiving label in this field. | : Write the Gizmo ID number from the receiving label in this field. | ||
; DIMMs | ; DIMMs | ||
| − | : Circle the number of DIMM slots on the motherboard. | + | : Circle the number of DIMM slots on the motherboard. |
; RAMBUSs | ; RAMBUSs | ||
| − | : Circle the number of RAMBUS slots on the motherboard. | + | : Circle the number of RAMBUS slots on the motherboard. |
; DDRs | ; DDRs | ||
| − | : Circle the number of DDR slots on the motherboard. | + | : Circle the number of DDR slots on the motherboard. |
; Processor Type | ; Processor Type | ||
: Circle the processor type (P-III, Celeron,Athlon, Duron, K6-2, K7) or write it in after "Other". | : Circle the processor type (P-III, Celeron,Athlon, Duron, K6-2, K7) or write it in after "Other". | ||
Revision as of 19:48, 7 December 2005
All systems that are being kept need to have correctly marked labels. There are pre-printed labels that should be used when possible. The pre-printed labels allow you to circle most of the relevant data with a minimal need for writing stuff in. If these labels are missing, alert an evaluation coordinator and use a plain white label to clearly record the information.
Please fill out the labels as completely as possible. The sections on the label include:
- ID
- Write the Gizmo ID number from the receiving label in this field.
- DIMMs
- Circle the number of DIMM slots on the motherboard.
- RAMBUSs
- Circle the number of RAMBUS slots on the motherboard.
- DDRs
- Circle the number of DDR slots on the motherboard.
- Processor Type
- Circle the processor type (P-III, Celeron,Athlon, Duron, K6-2, K7) or write it in after "Other".
- Proc Speed
- Write in the processor speed. For speeds less than 1 GHz, "round off" the speed to the nearest number that ends in 00, 33, 50, or 66.
- ISA, PCI, AGP
- If there are any ISA slots, circle ISA.
- If there are any PCI slots, circle PCI.
- If there is a AGP slot, circle AGP.
Notes
Put the pre-printed label on the front of the system (not on a drive bay cover, since those can pop out.
The information recorded on the label should also be recorded on the tally sheet.