Laptop Evaluation Checklist
STEPS | NOTES AND DETAILED INSTRUCTIONS |
REMOVE THE HARD DRIVE |
Before you do anything else, always remove the laptop's hard drive. If you can't find one, try and confirm that one's not installed by finding its interface on the motherboard. |
Check the optical drive for any CDs |
Use a small paper clip in the quick-release hole to open the optical drive. Any optical discs that you may find should be deposited in the Return to Receiving box. |
Is there a Floppy Drive? |
|
Is there a USB Port? |
|
Is the screen broken, or is there extensive damage? |
|
Find a power adapter |
Check for the power rating underneath the laptop. Sometimes you will end up having to use a higher amperage adapater than what's printed on the laptop. Consult your instructor if you have any questions! |
Does the system POST? Can you get into BIOS? |
|
Outfit the machine according to its specs! |
Check the whiteboard to see which spec the system fits under. Install an imaged hard drive, if available. Double check to make sure the RAM and hard drive size are appropriate! |
Put the system up for Memtest |
You can either boot Memtest from the harddrive, the network, or a LiveCD. For guidance, follow the steps under the Laptop Testing guide. |