Difference between revisions of "Memtest for Builders"

From FreekiWiki
Jump to navigation Jump to search
(Created page with "==Running Memtest== ;Goals *Complete two (2) testing passes in '''memtest86+''' without errors. ;Resources Template:Network Booting <br> [http://www.memtest.org/ Memtest We…")
 
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Running Memtest==
+
{{Migrated}}
;Goals
+
[https://drive.google.com/a/freegeek.org/?tab=mo#folders/0B9fabqk-bNi7R2hqV3plZzdpYVU Link]
*Complete two (2) testing passes in '''memtest86+''' without errors.  
 
  
;Resources
+
__NOTOC__
[[Template:Network Booting]]
+
==APPENDIX GUIDE A-3==
<br>
 
[http://www.memtest.org/ Memtest Website]
 
<br>
 
[[RAM Testing|RAM Testing: An in-depth article for the Hardware Testing area]]
 
  
;Testing Notes
+
==Running Memtest==
 +
'''Testing Notes'''<br>
 
*Full-size DIMM RAM is tested at stations in Hardware Testing.
 
*Full-size DIMM RAM is tested at stations in Hardware Testing.
 
*Laptop SODIMM RAM is tested in each laptop individually.
 
*Laptop SODIMM RAM is tested in each laptop individually.
 
===Testing Procedure===
 
===Testing Procedure===
Make sure the system you are testing has been evaluated and has a Keeper label. As-Is and machines to be recycled are not put through Memtest.  
+
&#9744; Prepare system for testing
----
+
*Make sure the system you are testing has been evaluated and has a Keeper label. As-Is and machines to be recycled are not put through Memtest.  
Verify that the system has the correct amount of RAM installed according to the whiteboard specifications. Update the amount of RAM and the Keeper label as needed.
+
*Verify that the system has the correct amount of RAM installed according to the whiteboard specifications. Update the amount of RAM and the Keeper label as needed.
----
+
&#9744; Boot to the network menu<br>
Access Memtest via one of three methods (full instructions below):
+
Access Memtest86+ via one of three methods (full instructions below):
 
*Via the Free Geek Network
 
*Via the Free Geek Network
 
*Via an imaged hard drive
 
*Via an imaged hard drive
 
*Via live boot CD. This is only used when the other methods fail. Consult your instructor first.
 
*Via live boot CD. This is only used when the other methods fail. Consult your instructor first.
----
+
&#9744; Run Memtest86+<br>
 
Start memtest from your menu options and verify that the correct amount of RAM is recognized. See your instructor or the troubleshooting steps below for help.
 
Start memtest from your menu options and verify that the correct amount of RAM is recognized. See your instructor or the troubleshooting steps below for help.
 
----
 
----
 
===Boot to Network===
 
===Boot to Network===
 
{{Template:Network Booting}}
 
{{Template:Network Booting}}
===Boot to GRUB Menu===
+
===Boot to a GRUB Menu===
{{Template:Boot to a GRUB Menu}}
+
{{Template:Boot to GRUB Menu}}
 +
 
 
==Troubleshooting Memtest==
 
==Troubleshooting Memtest==
 
===Memtest Freezes===
 
===Memtest Freezes===
 
Sometimes you'll get Memtest loaded onto a machine, blue screen and all, but it won't indicate any activity.  The newer versions of Memtest are incompatible with certain older chipsets in laptops.  The work-around we have available is to use an earlier version.  Unfortunately, this is only available on the Network at the moment.
 
Sometimes you'll get Memtest loaded onto a machine, blue screen and all, but it won't indicate any activity.  The newer versions of Memtest are incompatible with certain older chipsets in laptops.  The work-around we have available is to use an earlier version.  Unfortunately, this is only available on the Network at the moment.
----
+
&#9744; Boot to the laptop network menu.<br>
Boot to the network.
+
&#9744; Select <code>Other Memtest versions</code> from the menu, and choose the earliest version available (usually something like 2.0.1.1) <br>
----
+
*Confirm that Memtest is successfully running. If not, try a few different versions.  
Select <code>Other Memtest versions</code> from the menu, and choose the earliest version available (usually something like 2.0.1.1)
 
----
 
Confirm that Memtest is successfully running. If not, try a few different versions.  
 
----
 
 
===Misreported Available Memory===
 
===Misreported Available Memory===
Confirm that Memtest is reporting approximately the amount of installed memory.  If there is a large discrepancy (e.g., 384MB reported of 512MB installed), you may either have a bad stick of RAM, a bad DIMM slot, or the system may be claiming too much video memory.   
+
*Confirm that Memtest is reporting approximately the amount of installed memory.  If there is a large discrepancy (e.g., 384MB reported of 512MB installed), you may either have a bad stick of RAM, a bad DIMM slot, or the system may be claiming too much video memory.   
----
+
&#9744; Try installing a few different sticks of RAM and note the results. <br>
Try installing a few different sticks of RAM and note the results.  
+
&#9744; Reboot into BIOS and see about lowering the amount of memory dedicated to video.<br>
----
 
Reboot into BIOS and see about lowering the amount of memory dedicated to video.
 
 
----
 
----
 +
 +
'''Goals'''<br>
 +
*Complete two (2) testing passes in '''memtest86+''' without errors.
 +
 +
<!--'''Resources'''<br>
 +
[[Template:Network Booting]]
 +
<br>
 +
[http://www.memtest.org/ Memtest Website]
 +
<br>
 +
[[RAM Testing|RAM Testing: An in-depth article for the Hardware Testing area]]-->
 +
  
 
[[Category:Laptops]]
 
[[Category:Laptops]]

Latest revision as of 17:28, 21 May 2014

deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


Link


APPENDIX GUIDE A-3

Running Memtest

Testing Notes

  • Full-size DIMM RAM is tested at stations in Hardware Testing.
  • Laptop SODIMM RAM is tested in each laptop individually.

Testing Procedure

☐ Prepare system for testing

  • Make sure the system you are testing has been evaluated and has a Keeper label. As-Is and machines to be recycled are not put through Memtest.
  • Verify that the system has the correct amount of RAM installed according to the whiteboard specifications. Update the amount of RAM and the Keeper label as needed.

☐ Boot to the network menu
Access Memtest86+ via one of three methods (full instructions below):

  • Via the Free Geek Network
  • Via an imaged hard drive
  • Via live boot CD. This is only used when the other methods fail. Consult your instructor first.

☐ Run Memtest86+
Start memtest from your menu options and verify that the correct amount of RAM is recognized. See your instructor or the troubleshooting steps below for help.


Boot to Network

Boot to a GRUB Menu

☐ Ensure the system has an imaged hard drive.
☐ Start or restart the system.
☐ Just after the manufacturer's splash screen appears a small blinking cursor ( _ ) will appear in the upper left hand corner of the screen. Quickly press and hold down a Shift key.

  • After a few moments, the text Grub loading... should flash and you'll be presented with a menu with options similar to this:
Ubuntu, with Linux 2.6.32-33-generic
Ubuntu, with Linux 2.6.32-33-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)

☐ Use the up and down arrows to select your option.


Troubleshooting Memtest

Memtest Freezes

Sometimes you'll get Memtest loaded onto a machine, blue screen and all, but it won't indicate any activity. The newer versions of Memtest are incompatible with certain older chipsets in laptops. The work-around we have available is to use an earlier version. Unfortunately, this is only available on the Network at the moment. ☐ Boot to the laptop network menu.
☐ Select Other Memtest versions from the menu, and choose the earliest version available (usually something like 2.0.1.1)

  • Confirm that Memtest is successfully running. If not, try a few different versions.

Misreported Available Memory

  • Confirm that Memtest is reporting approximately the amount of installed memory. If there is a large discrepancy (e.g., 384MB reported of 512MB installed), you may either have a bad stick of RAM, a bad DIMM slot, or the system may be claiming too much video memory.

☐ Try installing a few different sticks of RAM and note the results.
☐ Reboot into BIOS and see about lowering the amount of memory dedicated to video.


Goals

  • Complete two (2) testing passes in memtest86+ without errors.