Navigating Printer Island

This is how you keep Printer Island working slick:

Usually, the staff member or whoever is supervising Printer Island needs to do the following things in addition to Printer Evaluation

These things constantly need doing:

1. Take the two plastic bins to the e-plastic gaylord and check them for metal as you empty it. If you find metal, ask the volunteers kindly to remove it.
2. Make sure that printer disassembly is going well, and that volunteers aren't taking the printers too far apart.
3. Sign tools in and out to volunteers. Record the number of machines each volunteer thinks s/he recycled when s/he returns his/her tools on the tool borrow sheet.
4. Check over the cart of keeper machines, and record the number and type of keepers on the sheet on the whiteboard, before the cart goes to the store or grant shelves.

Beginning of shift tasks:

1. Run through Evaluation on some of the incoming pile, or get a trusty volunteer to help if there's a lot:
   1. Inkjet Evaluation
   2. Scanner Evaluation
   3. Fax Machine Evaluation
   4. Laserjet Evaluation
2. Find out if the store or the grant shelves need printers, if so, focus volunteers on testing.
3. If the power supply incoming is full, chop and recycle some cables and walwarts.

End of shift tasks:

1. Take the scanners and scanner sections to the scanner gaylord in the front of the building.
2. Check over all the other bins, and take them to their Recycling destinations if need be.
3. Tidy up the work surfaces.
4. 10 minutes before the end of the shift, sweep odds & ends off the recycling table and into the plastic bin below. Sweep odds & ends off the floor and deposit likewise.