Difference between revisions of "Power Supply Triage"
Jump to navigation
Jump to search
(remove obsolete instructions) |
|||
Line 55: | Line 55: | ||
− | == | + | == What to do when done, where to put them == |
− | * Power supplies in your Recycle pile go straight to Recycling after they are signed off by the Eval instructor | + | * Power supplies in your Recycle pile go straight to Recycling after they are signed off by the Eval instructor. |
− | ; | + | ; Keepers |
− | : | + | : Mark them '''OKFG''' with a sharpie |
− | + | : Take them to the warehouse and put them in the POWER SUPPLIES TO KEEP location | |
− | : | ||
; Recycle | ; Recycle | ||
− | : Take | + | : Take them to the warehouse and put them in the POWER SUPPLIES TO RECYCLE location |
[[Category: Prebuild]] | [[Category: Prebuild]] |
Revision as of 13:07, 11 March 2008
Power supply sorting is done in System Evaluation.
Sort
Create a temporary place for two piles:
- Keep
- Recycle
Follow the triage flow chart below to determine which pile to put the power supply in. You will need to test some power supplies to do this.
Chart
Test
- Get the ATX power supply tester from a Build Coordinator (Dave or Martin), or ask any staff member. You can also check and see if the store has one. If you can't find a tester...move on to a different project, one will turn up eventually.
- For each power supply that needs to be tested, do these things:
- Plus each power supply into outlet
- Connect the tester to the ATX connector
- Check lights (solid lights are good)
- Put failures in Recycle pile (as directed in the Triage chart)
- When finished, give the power supply tester back to Build Coordinator
What to do when done, where to put them
- Power supplies in your Recycle pile go straight to Recycling after they are signed off by the Eval instructor.
- Keepers
- Mark them OKFG with a sharpie
- Take them to the warehouse and put them in the POWER SUPPLIES TO KEEP location
- Recycle
- Take them to the warehouse and put them in the POWER SUPPLIES TO RECYCLE location