Difference between revisions of "Printer Build 1"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
-------------------- | -------------------- | ||
| − | + | *tear down | |
| − | + | *vacuum dust | |
| − | + | *inspect | |
| − | + | *clean rollers | |
| − | + | *reassemble | |
| − | + | *print test page from printer | |
| − | + | *print test from Ubuntu on parallel/serial/USB/network | |
| − | + | *run a 20 page paper path test | |
cold/factory reset | cold/factory reset | ||
Revision as of 10:54, 26 April 2008
Note: this page is currently under construction and thus shouldn't be linked to from the main printer pages yet. Darin
Laser Printer Build:
- tear down
- vacuum dust
- inspect
- clean rollers
- reassemble
- print test page from printer
- print test from Ubuntu on parallel/serial/USB/network
- run a 20 page paper path test
cold/factory reset leave on for 20min with new fuser front/rear paper feed trays paper path pickup roller/seperator tab rubber restore, sandpaper? springs in paper tray missing/broken tabs in paper tray
HP/Cannon/Epson/Lexmark/Okidata/Apple