Difference between revisions of "Printer Evaluation 1"
| Line 20: | Line 20: | ||
<graphviz> | <graphviz> | ||
digraph{ | digraph{ | ||
| + | |||
| + | start [label="Start Here"] | ||
power [label="Can you find a power cord/supply for this printer?", shape=box] | power [label="Can you find a power cord/supply for this printer?", shape=box] | ||
| Line 30: | Line 32: | ||
ready_no [label="Reseat RAM\nReseat network card\nReseat Mainboard"] | ready_no [label="Reseat RAM\nReseat network card\nReseat Mainboard"] | ||
| + | |||
| + | strip [label="Mark with an X and strip it for parts"] | ||
codes [label="if there are Error codes displayed Reseat Toner, Paper Tray and check paper path for jams. Power on again"] | codes [label="if there are Error codes displayed Reseat Toner, Paper Tray and check paper path for jams. Power on again"] | ||
code50 [label="if there is an error code 50 reseat the fuser and leave it on for 20min"] | code50 [label="if there is an error code 50 reseat the fuser and leave it on for 20min"] | ||
| + | build [label="Mark in a hidden place (underside) and set aside for [[Printer Build 1]]] | ||
| − | |||
| − | |||
| − | |||
start -> power | start -> power | ||
| Line 47: | Line 49: | ||
ready -> ready_no [label=no] | ready -> ready_no [label=no] | ||
ready_no -> ready | ready_no -> ready | ||
| − | |||
ready -> build [label=no] | ready -> build [label=no] | ||
} | } | ||
Revision as of 11:14, 29 April 2008
This is my scratch page for revising printer testing, it will be messy right now and shouldn't have anything that links to it yet - Darin
Printers
Inkjet Printers
Laserjet Printers
|match a power supply |check for lose/missing vital parts |check for lose/missing cosmetics. |power up with paper in it |check for ready status |check for grinding noises
?Apple Printers? ?Cannon Wide Format?
- Okidata: all Okidata printers should be stored in their own area, no need to eval/build/triage.
-If it still does not come up ready to print --If it has a paper jam or fuser (50) error comment this and set aside for Printer Build 1 --If it has no messages on the LCD (just stars or dashes) and the mainboard was replaced (if possible) mark with an X then run through Printer Parting 1.
Is it missing essential parts (paper drawer, fuser, toner, etc)?
Is it missing cosmetic parts: covers, lids?
Does it have lose parts, missing screws?
Laser Printer Reject Types:
doesn't power on at all bad mainboard paper jam fuser error missing essential parts missing cosmetics won't pass paper path test
Dot Matrix Printers
Other types of printers
Fax Machines
Scanners
PSC (All-in-one printer, scanner, copier)
Copiers
Darin's List
Printerland:
find people to help with organization (Ian) get an eval system started to move testing along organize parts storage implement parts storage into triage set QC standards for build paper towel dispenser and recycling bin (like in the restroom) for rubber restore/alcohol.
oversight to impliment a more formal printerland program. advice from people who set up build program? any committee(s) need to approve anything?
set up a class? will it need any pre-reqs? (classes like command line or adoption?) build program volunteers? printer adoption program?
temporary space to store printers while implementing new system. permanent changes to storage in printerland, possibly including new area for incoming. internship? fill out application?