Difference between revisions of "Removing components from systems"
Jump to navigation
Jump to search
Stillflame (talk | contribs) (removed mention of proc speed; taken care of in mobo sort now) |
Stillflame (talk | contribs) (broke memory down into explicit list so as to avoid SIMMs (preparation for change to removing red/yellow distinction)) |
||
Line 75: | Line 75: | ||
#* Removeable hard drive enclosures. (These look like little drawers). | #* Removeable hard drive enclosures. (These look like little drawers). | ||
#* '''Leave all rails and drive sleds in case!''' | #* '''Leave all rails and drive sleds in case!''' | ||
− | # Remove | + | # Remove the following types of memory |
− | #* | + | #* DDR |
+ | #* RAMBUS | ||
+ | #* SDRAM | ||
+ | #* SODIMMS | ||
# Remove the following cards | # Remove the following cards | ||
#* Remove any '''US Robotics''' brand '''ISA''' modems marked '''Sportster'''. | #* Remove any '''US Robotics''' brand '''ISA''' modems marked '''Sportster'''. |
Revision as of 16:18, 21 July 2009
ORANGE CHART
YELLOW LIGHT INSTRUCTIONS
- Do not pull anything unless these instructions (or the white board) say to pull it. This includes ribbon cables.
- Hard drives should all have been removed by now. Please be certain that they have been.
- Remove the following drives
- DVD drives -- regardless of speed.
- (They must have a standard rectangular faceplate.)
- Recordable or rewritable CD drives -- regardless of speed.
- (They must have a standard rectangular faceplate.)
- Leave all rails and drive sleds in case!
- Removeable hard drive enclosures. (These look like little drawers).
- Leave all rails and drive sleds in case!
- DVD drives -- regardless of speed.
- Remove the following types of memory
- DDR
- RAMBUS
- SDRAM
- SODIMMS
- Remove the following cards
- Remove any US Robotics brand ISA modems marked Sportster.
- Remove any PCI cards
- Remove any PCI-e cards
- Remove any AGP cards
- Remove all power supplies
- (both AT and ATX)
- Remove button batteries
- (unless they are soldered onto the motherboard)
- Remove Macintosh batteries (in case you're taking apart a Mac)
- Remove 3.5 inch face plates
Notes
Do not pull anything unless these instructions (or the whiteboard) say to pull it. This includes ribbon cables.
- When pulling sound cards, leave sound cables attached to card (not CD Drive or motherboard)
- Do not pull risers. (They are designed to go with the motherboard they came with and are not generic.)
- When pulling any kind of drive, rails and brackets should stay with the system.
- half-height sized cards
- A few PCI or AGP cards will have a back plate that is only be half as tall as normal cards. These are "half height" cards and need to be left in the box.
- This refers to the size of the "stem" of the card, not the card itself.
- When pulling cards, leave cables attached to card
- Do not pull risers. (They are designed to go with the case they came with and are not generic.)
- Do not pull a "card" that does not go into an industry standard slot. (We do not consider these to be cards, and they need to stay with their motherboards.)