Difference between revisions of "Removing components from systems"

Latest revision as of 23:55, 6 July 2014

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)

link

ORANGE CHART

Notes

Do not pull anything unless these instructions (or the whiteboard) say to pull it. This includes ribbon cables.

When pulling sound cards, leave sound cables attached to card (not CD Drive or motherboard)
Do not pull risers. (They are designed to go with the motherboard they came with and are not generic.)
When pulling any kind of drive, rails and brackets should stay with the system.

Half-height sized cards: A few PCI or AGP cards will have a back plate that is only half as tall as normal cards. These are "half height" cards and need to be left in green light systems.; This refers to the size of the "stem" of the card, not the card itself.

When pulling cards, leave cables attached to card
Do not pull risers. (They are designed to go with the case they came with and are not generic.)
Do not pull a "card" that does not go into an industry standard slot. (We do not consider these to be cards, and they need to stay with their motherboards.)

English Version: Removing_components_from_systems

Vercion Español: Removing_components_from_systems_en_Español

@@ Line 1: / Line 1: @@
+{{migrated}}
+[https://docs.google.com/document/d/14OJLl1EM_oa0NU00VVakWfHMfoU3mU8UgarhNr7WdE0/edit?usp=sharing link]
 __NOTOC__
 == ORANGE CHART ==
@@ Line 15: / Line 19: @@
      check_also_pull  [label="Check the\nWHITE BOARD\nfor ALSO PULL instructions",
-                       label_es="Cheque en el\nPIZARRON BLANCO\npor si hay intrucciones especiales de DESMONTAJE",
+                       label_es="Revise en el\nPIZARRON BLANCO\npor si hay instrucciones\n especiales de DESMONTAJE",
+                      shape="box"]
+remove_known_goods  [label="If you put any RAM,\n cards or a power supply\n in the system, return it",
+                      label_es="Si ponga cualquier RAM,\n tarjetas, o una fuente de poder\n en el sistema, devuelvelo",
                        shape="box"]
      wantcase      [label="Do we want the\nCASE?\nSee the BLACK CHART",
-                    label_es="¿Queremos nosotros el\nARMAZON?\nVéase en el DIAGRAMA NEGRO",
+                    label_es="¿Queremos nosotros el\nGABINETE?\nVer en el DIAGRAMA NEGRO",
-                    color="black", style="bold", URL="/index.php/Case_Triage"]
+                    color="black", shape="square", style="bold", URL="/index.php/Case_Triage"]
      process_hds   [label="Remove ALL\nHARD DRIVES\nand put them in\nthe PLASTIC GREEN TRAY",
-                    label_es="Remueva TODOS\nLOS DISCOS DUROS\ny póngalos en\nla CAJA VERDE DE PLASTICO",
+                    label_es="Remueva TODOS\nLOS DISCOS DUROS\ny ponerlos en\nla CAJA VERDE DE PLASTICO",
-                    shape="box"]
+                    shape="box", style="bold", fontsize= "12"]
-     process_case1 [label="Remove the power supply.",
+     process_case1 [label="Remove the power supply",
-                    label_es="Remueva el fuente de poder.",
+                    label_es="Remueva la fuente de poder.",
                     shape="box"]
      process_case2 [label="Remove the motherboard\nand I/O shield from the case",
-                    label_es="Remueva la tarjeta madre\ny el protector I/O del armazón",
+                    label_es="Remueva la tarjeta madre\ny el protector I/O del gabinete",
                     shape="box"]
      process_case3 [label="Remove all optical drives\n(CD and DVD drives)",
-                    label_es="Remueva todos las unidades de disco\n(unidades de CD y DVD )",
+                    label_es="Remueva todas las unidades de disco\n(unidades de CD y DVD )",
                     shape="box"]
      process_case4 [label="Do not remove anything else",
@@ Line 38: / Line 47: @@
                     shape="box"]
      process_case5 [label="Replace all case screws",
-                    label_es="Reemplaze todos los tornillos del armazón",
+                    label_es="Reemplaze todos los tornillos del gabinete",
                     shape="box"]
      process_case6 [label="Take the case to the Thrift Store",
-                    label_es="Tome el armazón y llévelo a la TIENDA DE SEGUNDA MANO",
+                    label_es="Tome el gabinete y llévelo a la TIENDA DE FREE GEEK",
                     shape="box"]
      process_mobo1  [label="Remove any cards",
-                     label_es="Remueva cualquier tarjeta",
+                     label_es="Remueva todas las tarjetas",
                      shape="box"]
      process_mobo2  [label="Remove the motherboard from the case",
-                     label_es="Remueva la tarjeta madre del armazón",
+                     label_es="Remueva la tarjeta madre del gabinete",
                      shape="box"]
      process_mobo3  [label="Remove the I/O shield\nand twist-tie it to the motherboard",
-                     label_es="Remueva el protector I/O \ny atelo a la tarjeta madre",
+                     label_es="Remueva el protector I/O \ny amarrelo a la tarjeta madre",
                      shape="box"]
-     process_mobo4  [label="Take the motherboard to\nAdvanced Testing.",
+     process_mobo4  [label="Take the motherboard to\nAdvanced Testing",
-                     label_es="Tome la tarjeta madre madre y llévela a\nAdvanced Testing.",
+                     label_es="Tome la tarjeta madre y llévela a\nAdvanced Testing.",
                      shape="box"]
-     good_mobo      [label="Does the motherboard\nhave DDR slots?\n(single notch in the middle)",
+     good_mobo      [label="Does the motherboard\nhave SATA ports?",
-                     label_es="¿Tiene la tarjeta madre\nDDR slots?"]
+                     label_es="¿Tiene la tarjeta madre\nSATA ports?"]
+    put_on_label   [label="Put the label on the front of the system\nif there isn't already one there.",
+                    label_es="Ponga una etiqueta en frente del sistema\nsi ya tiene una no ponga otra.",
+                    shape="box"]
-     put_on_label   [label="Put the label on the front of the system if you haven't already.",
+     check_hd   [label="Check again for hard drives",
-                     label_es="Ponga la etiqueta en el frente del sistema, si no lo ha",
+                     label_es="Chequea otra vez por discos duros",
                      shape="box"]
+    safe_system   [label="Make sure system is put back together safely",
+                    label_es="Vuelva a juntar el sistema seguramente",
+                    shape="box"]
+    check_with_instructor  [label="Check with an instructor",
+                           label_es="Consulte con un instructor",
+                           shape="box"]
      put_on_cart   [label="Put the system on the cart\nwith label facing out",
-                    label_es="Ponga el sistema en el carro\ncon la etiqueta hacia el frente",
+                    label_es="Ponga el sistema en el carro\ncon su etiqueta hacia el frente",
                     shape="box", style="bold"]
      process_yellow1 [label="Follow\nYELLOW LIGHT INSTRUCTIONS",
-                      label_es="Seguir las\nINTRUCCIONES YELLOW LIGHT ",
+                      label_es="Seguir las\nYELLOW LIGHT INSTRUCTIONS ",
                       shape="box", color="yellow", style="bold", URL="/index.php/Yellow_Light_Instructions"]
      process_green1  [label="Remove all\nRAM\n(memory)",
-                      label_es="Remover toda la\nRAM\n(memoria)",
+                      label_es="Remover toda la\nmemoria\n(RAM)",
                       shape="box"]
      process_green2  [label="Remove all\nCARDS\n(except half height cards)",
                       label_es="Remover todas las\nTARJETAS\n(excepto las tarjetas\nde medio tamaño)",
                       shape="box"]
+    process_green3  [label="Leave all rails, brackets,\nand drive sleds in the case"
+                     shape="box"]
-    start -> process_hds
+   start -> process_hds
      process_hds -> what_class
@@ Line 87: / Line 109: @@
      what_class -> check_also_pull [label="RED\nLIGHT", color="red", style="bold"]
-     check_also_pull -> put_on_label [color="red", style="bold"]
+     check_also_pull -> remove_known_goods [color="red", style="bold"]
+    remove_known_goods -> check_hd [color="red", style="bold"]
      what_class -> process_green1 [label="GREEN\nLIGHT", color="green", style="bold"]
-     process_green1 -> process_green2 -> put_on_label [color="green", style="bold"]
+     process_green1 -> process_green2 -> process_green3 -> check_hd [color="green", style="bold"]
      what_class ->  wantcase [label="YELLOW\nLIGHT"]
@@ Line 101: / Line 125: @@
      process_mobo1 -> process_mobo2 -> process_mobo3 -> process_mobo4 -> process_yellow1
-     process_yellow1 -> put_on_label
+     process_yellow1 -> check_hd
+    check_hd -> put_on_label
+    put_on_label -> safe_system
+    safe_system -> check_with_instructor
-     put_on_label -> put_on_cart
+     check_with_instructor -> put_on_cart
 }
@@ Line 118: / Line 148: @@
 * When pulling any kind of drive, rails and brackets should stay with the system.
-; half-height sized cards
+; Half-height sized cards
-: A few PCI or AGP cards will have a back plate that is only half as tall as normal cards. These are "half height" cards and need to be left in the box.
+: A few PCI or AGP cards will have a back plate that is only half as tall as normal cards. These are "half height" cards and need to be left in green light systems.
 : This refers to the size of the "stem" of the card, not the card itself.
@@ Line 129: / Line 159: @@
 Vercion Español: [[Removing_components_from_systems_en_Español]]
 [[Category:System Evaluation]]

Difference between revisions of "Removing components from systems"

Latest revision as of 23:55, 6 July 2014

ORANGE CHART

Notes

Navigation menu

Search