Difference between revisions of "Template:Network Booting"
Jump to navigation
Jump to search
m |
|||
| Line 12: | Line 12: | ||
*If there is no hard drive or optical disk installed in your system, you should automatically boot to the network menu. | *If there is no hard drive or optical disk installed in your system, you should automatically boot to the network menu. | ||
| − | + | '''Troubleshooting steps:'''<br> | |
*Check the ethernet cable you are using for damage. These cables are used a lot, and wear out. | *Check the ethernet cable you are using for damage. These cables are used a lot, and wear out. | ||
*Double-check your BIOS boot order settings. They may not have saved for various reasons. | *Double-check your BIOS boot order settings. They may not have saved for various reasons. | ||
Revision as of 13:25, 8 December 2012
☐ Connect to the Free Geek network via an ethernet cable. You can find these all Reuse areas.
☐ Boot to BIOS.
☐ Set the boot order settings:
- Optical Drive first
- Hard Drive second
- Network/PXE/LAN boot last
- Other options can can be ignored.
☐ Save changes and exit BIOS.
☐ Boot to the network:
- The process is similar to entering BIOS. You can usually hit a shortcut key right after startup.
- F12 is the most common shortcut key. Otherwise look for a boot device list key.
- If there is no hard drive or optical disk installed in your system, you should automatically boot to the network menu.
Troubleshooting steps:
- Check the ethernet cable you are using for damage. These cables are used a lot, and wear out.
- Double-check your BIOS boot order settings. They may not have saved for various reasons.
- Check to see if there is a light on the laptop's ethernet port; this light shows that the port recognizes the cable. If you think the port is broken, ask your instructor for help.