UPS (power supply) Eval1 Howto

From FreekiWiki
Jump to navigation Jump to search

Batteries and UPSes are evaluated separately. When removing batteries, be careful to find the clips for the wires: do not cut the wires.

UPSes

Do they:

  • have a battery hatch?
  • are rated at 400 VA (voltamps) or greater?
  • have a manufacturer who still exists? immediately recycle the following:
    • Best
    • MGE
    • CyberPower

UPSes that pass Eval 1

Get a keeper tag on them with any information you can fill in, and are put in the Eval2 pile.

UPSes that fail Eval 1

To recycle:

  • Tally on the sheet
  • Mine aluminum heatsinks.
  • Fully recycle if the pile is large, leave under the small bench against the wall if it's small.

Batteries

Evaluate physically first:

  • are there any cracks?
  • bulges?
  • other physical damage?

If so, using gloves, place the battery in a sturdy plastic bag and recycle.

With a voltmeter, test the terminals. If you get a negative voltage, you've reversed the terminals. Batteries are rated at 6V, 12V, and 24V, and must display at least their rated voltage. So a 12V battery showing 11.8 is a recycler, but showing 13.7 is fine.

Retrieved from "http://wiki.freegeek.org/index.php?title=UPS_(power_supply)_Eval1_Howto&oldid=14371"