UPS (power supply) Eval1 Howto

From FreekiWiki
Revision as of 16:54, 26 May 2005 by 192.168.3.13 (talk)
Jump to navigation Jump to search

Batteries and UPSes are evaluated separately. When removing batteries, be careful to find the clips for the wires: do not cut the wires.


UPSes pass eval if they:

  • have a battery hatch
  • are rated at 400 VA (voltamps) or greater
  • are not made by a company that is out of business. immediately recycle the following:
    • Best
    • MGE
    • CyberPower


UPSes that pass Eval 1 get a keeper tag on them with any information you can fill in, and are put in the Eval2 pile. UPSes that fail are recycled. To recycle:

  • Tally on the sheet
  • Mine aluminum heatsinks.
  • Fully recycle if the pile is large, leave under the small bench against the wall if it's small.


Batteries are evaluated physically first:

  • are there any cracks?
  • bulges?
  • other physical damage?

If so, place the battery in a plastic bag and recycle.

With a voltmeter, test the terminals. If you get a negative voltage, you've reversed the terminals. Batteries are rated at 6V, 12V, and 24V, and must display *at least* their rated voltage. So a 12V battery showing 11.8 is a recycler, but showing 13.7 is fine.