Difference between revisions of "Configure scanner"
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
*Make sure the lock is disengaged (not all scanners have a lock, but the best ones do) | *Make sure the lock is disengaged (not all scanners have a lock, but the best ones do) | ||
*Check to see if the power supply is good (and the right voltage/amperage) | *Check to see if the power supply is good (and the right voltage/amperage) | ||
| + | **It is generally a good idea to have some "known good" power supplies on hand for initial testing. | ||
[[Category: Tech support]] | [[Category: Tech support]] | ||
[[Category:Scanners]] | [[Category:Scanners]] | ||
Revision as of 14:04, 11 March 2006
USB
Configuring a USB scanner is a matter of installing the sane scanner drivers and a scanning program.
The following list will work:
- xsane
- libsane
- libsane-extras
- sane
- sane-utils
to install them:
- open a terminal
- become root
- type:
- apt-get update
- apt-get install xsane libsane libsane-extras sane sane-utils
to start using the scanner
- connect the power to the scanner
- connect the USB cord to the scanner and the CPU
- start the xsane program (KDE menu)
Problems
- Make sure the scanner is supported by sane
- Make sure the lock is disengaged (not all scanners have a lock, but the best ones do)
- Check to see if the power supply is good (and the right voltage/amperage)
- It is generally a good idea to have some "known good" power supplies on hand for initial testing.