Difference between revisions of "Removing components from systems"
Jump to navigation
Jump to search
(add link to spanish and english versions of page) |
m (→ORANGE CHART: add newlines) |
||
Line 76: | Line 76: | ||
shape="box"] | shape="box"] | ||
process_green2 [label="Remove all\nCARDS\n(except half height cards)", | process_green2 [label="Remove all\nCARDS\n(except half height cards)", | ||
− | label_es="Remover todas las\nTARJETAS\n(excepto las tarjetas | + | label_es="Remover todas las\nTARJETAS\n(excepto las tarjetas\nde medio tamaño)", |
shape="box"] | shape="box"] | ||
Revision as of 15:25, 9 October 2010
ORANGE CHART
Notes
Do not pull anything unless these instructions (or the whiteboard) say to pull it. This includes ribbon cables.
- When pulling sound cards, leave sound cables attached to card (not CD Drive or motherboard)
- Do not pull risers. (They are designed to go with the motherboard they came with and are not generic.)
- When pulling any kind of drive, rails and brackets should stay with the system.
- half-height sized cards
- A few PCI or AGP cards will have a back plate that is only half as tall as normal cards. These are "half height" cards and need to be left in the box.
- This refers to the size of the "stem" of the card, not the card itself.
- When pulling cards, leave cables attached to card
- Do not pull risers. (They are designed to go with the case they came with and are not generic.)
- Do not pull a "card" that does not go into an industry standard slot. (We do not consider these to be cards, and they need to stay with their motherboards.)
English Version: Removing_components_from_systems
Vercion Español: Removing_components_from_systems_en_Español