Difference between revisions of "Wireless Card Testing"

From FreekiWiki
Jump to navigation Jump to search
 
(8 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
==Wireless Card Testing==
+
{{migrated}}
 +
[https://docs.google.com/document/d/1qpZ42H64z3jqDSx6LDt0MK80Zb5atJUfmOtMgcT_YKc/edit?usp=sharing Link]
  
−
All working wireless cards go to the store. Things to write on a sticker for the store:
+
{|fontsize="14" border=".05" fontweight="bold" cellpadding=".5" width="100%"
−
'''
+
|-
−
    -Whether the card works with linux
+
|align="left" padding=".5"|These are instructions for testing Wireless Cards for desktop computers. Cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor.
−
    -Chipset Number
+
{|fontsize="12" cellpadding=".5" border=".05" font-weight="bold" cellpadding=".7"
−
    -If it needs a driver downloaded, mark it as such
+
|-
−
    -Attach a “tested by” sticker with your initials'''
+
|width="25%" align="center"|STEPS
 +
|width="75%" align="center"|NOTES AND DETAILED INSTRUCTIONS
 +
|-
 +
| Check for Damage || Visually inspect the wireless card for a missing faceplate and\or loose or damaged antenna connector. Determine that it is not a pre. 802.11g spec. card. If the card is missing its antenna, replace it with another antenna.
 +
|-
 +
| Seat Card & Turn On || Place The Wireless Card into the slot on the motherboard, click the Power On switch, log into Xubuntu OS.
 +
|-
 +
| Determine Card Status ||
 +
Keep IF:
 +
#you can connect to the Free Geek Wireless Network and surf the web.
 +
#OR if the card shows up in '''lspci''' or '''sudo lshw''' (run these commands in a terminal) but does not work with Linux (eg does not allow you to connect to the internet.)
 +
''Not sure if the card is compatible?''
 +
#Open Firefox and type this address in the URL https://help.ubuntu.com/community/WifiDocs/WirelessCardsSupported. This is an Ubuntu community page dedicated to listing wireless cards' varying functionality under linux operating systems. The page may also list the need for drivers on specific cards.
 +
#Click the side link “By Manufacturer” and search for the wireless card's chip set.
 +
*Keep in mind that this list is not comprehensive and may not include the card you are looking for.  If that's the case, test it anyway.
 +
Recycle into the yellow bin IF:
 +
#the card's lights do not come on
 +
#AND the card does not show up in lspci or sudo lshw when you type these commands into a terminal
 +
*If both conditions are true, your done with testing, go to the next card and start again.
 +
|-
 +
| Power Down || Turn off the computer and remove the wireless card.
 +
|-
 +
| Label || Initial and stick a Tested By Sticker on the Keeper Card. If the wireless card is not compatible with Linux, write that on a sticker or piece of tape, attach to the card with a Powers On Untested Sticker.
  
−
'''General'''
+
|-
−
 
+
| Store Box || Place the Keeper Card in the outgoing thrift store box.
−
#Locate a wireless card and match it with an antenna if it needs one.
+
|-
−
#Make sure the motherboard is unpowered with its power supply switched off.
+
| Do it again! || Thanks for your good work!
−
#Attach the wireless card to a free PCI slot.
+
|-
−
#Once card is inserted, remove hands from motherboard and turn on power supply.
+
[[Category:Hardware Testing]]
−
#Turn on motherboard.
+
[[Category:Howto]]
−
#Login.
 
−
 
 
−
'''Does it work with Linux?'''
 
−
 
 
−
#Wait for OS to load and then attempt to connect wirelessly to FreeGeek wireless (should happen automatically).
 
−
#Once connected, try to surf the web.
 
−
 
 
−
'''What is the card's chipset?'''
 
−
 
 
−
#Open the terminal and type “lspci”.
 
−
#Look for the line about the wireless card and record the chipset number.
 
−
 
 
−
Put all '''tested''', '''working''', '''labeled''' wireless cards '''with antenna attached''' in the “To Store” box.  Recycle ones that fail.
 
−
 
 
−
Troubleshooting:
 
−
 
 
−
#If the card appears to be in working order but you cannot connect to wireless, establish a wired connection.  Open Firefox and go to the bookmark “supported wireless cards”.  Click the side link “By Manufacturer”.  This is an Ubuntu community page dedicated to listing wireless cards' varying functionality under linux operating systems.  The page may also list the need for drivers on specific cards.
 
−
 
 
−
#If the card appears to be in working order but you cannot connect to wireless, write a sticker that indicates this card may not work with linux.  Also write “AS IS”.  These can also go to the store, but will be sold at an untested price.
 

Latest revision as of 11:57, 1 August 2014

deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


Link

These are instructions for testing Wireless Cards for desktop computers. Cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor.
STEPS NOTES AND DETAILED INSTRUCTIONS
Check for Damage Visually inspect the wireless card for a missing faceplate and\or loose or damaged antenna connector. Determine that it is not a pre. 802.11g spec. card. If the card is missing its antenna, replace it with another antenna.
Seat Card & Turn On Place The Wireless Card into the slot on the motherboard, click the Power On switch, log into Xubuntu OS.
Determine Card Status

Keep IF:

  1. you can connect to the Free Geek Wireless Network and surf the web.
  2. OR if the card shows up in lspci or sudo lshw (run these commands in a terminal) but does not work with Linux (eg does not allow you to connect to the internet.)

Not sure if the card is compatible?

  1. Open Firefox and type this address in the URL https://help.ubuntu.com/community/WifiDocs/WirelessCardsSupported. This is an Ubuntu community page dedicated to listing wireless cards' varying functionality under linux operating systems. The page may also list the need for drivers on specific cards.
  2. Click the side link “By Manufacturer” and search for the wireless card's chip set.
  • Keep in mind that this list is not comprehensive and may not include the card you are looking for. If that's the case, test it anyway.

Recycle into the yellow bin IF:

  1. the card's lights do not come on
  2. AND the card does not show up in lspci or sudo lshw when you type these commands into a terminal
  • If both conditions are true, your done with testing, go to the next card and start again.
Power Down Turn off the computer and remove the wireless card.
Label Initial and stick a Tested By Sticker on the Keeper Card. If the wireless card is not compatible with Linux, write that on a sticker or piece of tape, attach to the card with a Powers On Untested Sticker.
Store Box Place the Keeper Card in the outgoing thrift store box.
Do it again! Thanks for your good work!
Retrieved from "http://wiki.freegeek.org/index.php?title=Wireless_Card_Testing&oldid=70759"