Difference between revisions of "Assembly checklist"

From FreekiWiki
Jump to navigation Jump to search
 
(51 intermediate revisions by 10 users not shown)
Line 1: Line 1:
 +
{{migrated}}
 +
[https://docs.google.com/document/d/13PkUfW3Ol94NxHuXF2_RXI0Mw0g_8N94nIszGyaiedw/edit?usp=sharing Link]
 +
 +
 +
There is a version of this checklist in Spanish for use in Spanish Build; that version is located [[Guia de Construccion|here]].
 +
 
'''Work through every step as well as you can, and then ask a neighbor or your build instructor if you still have questions.'''  Try and learn the reason for each of the steps: this knowledge will come in handy later when, inevitably, things aren't going as smoothly.
 
'''Work through every step as well as you can, and then ask a neighbor or your build instructor if you still have questions.'''  Try and learn the reason for each of the steps: this knowledge will come in handy later when, inevitably, things aren't going as smoothly.
  
−
'''Use your resources!'''  There are lots available to you - your neighbor, the Build assistants and instructors and, of course, the internet. You can access tips and troubleshooting ideas on our wiki (http://wiki.freegeek.org) under [[Build tips]]. Some of the information contained therein is in the blue Build binder. If you run into something really weird, Google may be your best bet.  
+
'''Use your resources!'''  There are lots available to you - your neighbor, the Build assistants and instructors and, of course, the internet. Searching the web for answers to the challenge you are facing is one of the best ways to learn.  You can also access tips and troubleshooting ideas on our wiki (http://wiki.freegeek.org) under [[Build tips]] or in our Troubleshooting Guide (http://wiki.freegeek.org/index.php/Build_Troubleshooting_Guide).
  
−
Your Build instructor will check the shelves to figure out what type of boxes we need built.  Check the white board to find out what type of box to build, then work your way down this checklist.
+
Supplies like cards, rails, hard drives, cleaning supplies, etc. can be found on the metal racks in the center of the build workshop. Here you will also find a box containing an assortment of common DDR memory.
−
 
 
−
Supplies like cards, rails, hard drives, etc. can be found on the metal racks in the center of the build workshop. An assortment of common DDR and DDR2 memory is kept in a box on the west end of the metal racks.
 
 
{| border="2" fontname="Nimbus Sans" fontsize="12"
 
{| border="2" fontname="Nimbus Sans" fontsize="12"
 
|-
 
|-
−
==BEFORE YOU POWER ON==
+
== BEFORE YOU POWER ON ==
 
----
 
----
 
'''Check what needs to be built on the white board'''  
 
'''Check what needs to be built on the white board'''  
−
* Head to the warehouse and scope out a system you would like to build.  
+
* Head to the To Be Built Rack and scope out a system you would like to build.  
−
*'''Be sure to pay attention to the Green Light label.''' It will give you a lot of important information, like the type of video, if it did not POST, if the processor is Dual Core, etc. Make sure that the box you are about to Build is appropriate for its spec.
+
*'''Be sure to pay attention to the Build label.''' It will give you a lot of important information, like the type of video, if it did not POST, if the processor is Dual Core, etc. Make sure that the box you are about to Build is appropriate for its spec.
−
* If everything looks good, Grab the system from the warehouse, take it back to your build station, and figure out how to pop it open.  
+
* If everything looks good, Grab the system from the To Be Built Rack, take it back to your build station, and figure out how to pop it open.  
 
----
 
----
 
'''Check capacitors'''
 
'''Check capacitors'''
−
* Visually inspect motherboard capacitors for bulges/leaks.  If you find one, check with your instructor.  
+
* Visually inspect motherboard capacitors for bulges/leaks.  If you find one, ask your instructor for a "Rejected" sticker.  
 
----
 
----
−
'''Make sure that covers are available for open bays'''
+
'''Secure the case'''
−
* Some cases require specific (proprietary) parts, which, unfortunately, we have to recycle...
+
* Cover any open bays or slots. Replace any other missing case parts. (You can substitute a CD-ROM drive if no compatible bay cover is available. Please make sure that it works after installation.) Some cases require specific (proprietary) parts. If we don't have extras on hand, we unfortunately have to recycle them...  
−
* You can add a CD-ROM if no cover plate is available.
+
* Ensure that all components are securely fastened.
 +
* Check for/remove any loose screws or unnecessary cables. If you're unsure of how to do this, ask an instructor.
 
----
 
----
−
'''Is there Microsoft Branding (Certificates of Authenticity)? Are there Asset tags? (identifying the last owner)'''
+
'''Are there Asset tags? (identifying the last owner)? Or branded hardware tags on the faceplate (identifying original components such as RAM, HDD, Optical Drive etc)?'''
−
* If there are, remove them. '''DO NOT remove FG-PDX, "uncovered electronic device" or Green Light stickers.'''
+
* If there are, remove them.  
 +
'''DO NOT remove Microsoft Windows Branding (Certificates of Authenticity) FG-PDX, "uncovered electronic device" Processor/graphics tags or Green Light stickers.'''
 
----
 
----
 
'''Clean and vacuum out box'''
 
'''Clean and vacuum out box'''
−
* There are vacuums available in the Big Black Bucket near the Build shelves. The most effective way to clean out a box is to use a paint brush to kick up the dust while vacuuming.
+
* There is a vacuum available on the Build supply shelf by the cleaning supplies. The most effective way to clean out a box is to use a paint brush to kick up the dust while vacuuming.
 
----
 
----
 
'''Test battery'''
 
'''Test battery'''
−
* Set voltmeter to DCV=20, place one wand on battery and one wand on metal part of case.  Battery's good if volt reading 3.0 or greater.  
+
* Grab a voltmeter and set it to DCV=20.  Place one wand on the battery itself and one wand on a metal part of the case.  The battery passes if its voltage shows as 3.0 or greater.  
 
----
 
----
 
'''Install RAM'''
 
'''Install RAM'''
−
* For DDR, try speed 266 (PC2100) first.  If that doesn't work, try higher numbers. Sometimes the BIOS will tell you the needed speed.
+
* For DDR2, try speed 533 (PC2-4200) first.  If that doesn't work, try higher speeds. Sometimes the BIOS will tell you the needed speed.
−
* For DDR2, try speed 400 (PC3200) first.  If that doesn't work, try higher numbers. Sometimes the BIOS will tell you the needed speed.
+
* If your system's memory slots will not accept DDR2 memory, they will require another type. DDR3 is acceptable - ask your instructor for DDR3 RAM. DDR1 systems should be rejected and sent back to Prebuild as yellow-light systems.
−
** NOTE: If the slots look like DDR but don't fit, they are probably DDR2.
+
** NOTE: Usually RAM should be paired in dual channels for higher performance (i.e., 2 sticks of RAM used in specific slots, often color-coded). Make sure you try all combinations of slots if you are having trouble getting the system to recognize the RAM, and consult an Instructor if you're still having trouble.
−
** NOTE: For both DDR and DDR2, sometimes they should be paired for higher performance (i.e., 2 sticks of RAM used in specific slots). Make sure you try all combinations of slots if you are having trouble getting the system to recognize the RAM.
+
* Write down what type and speed of RAM you installed; this info will come in handy later.
 
----
 
----
 
'''Install video card if needed'''
 
'''Install video card if needed'''
−
* You do not need to install an AGP video card if there is onboard video.  
+
* You do not need to install a video card if there is functional onboard video.  
−
* PCI-e cards are only available for FG-PDX and High-Ends. Ask an instructor if you need one.
+
* Ask an instructor if you need a PCI-e card; AGP cards are available in the Build room.
 
----
 
----
 +
 +
----
 +
'''Attach monitor, keyboard, mouse, network, sound and power cords'''
 +
----
 +
 
'''Initial power on'''  
 
'''Initial power on'''  
 
* See if expected memory value is displayed during POST or in BIOS.  
 
* See if expected memory value is displayed during POST or in BIOS.  
Line 47: Line 58:
 
----
 
----
 
'''Remove floppy drive if possible'''
 
'''Remove floppy drive if possible'''
−
* Remove the floppy drive if you can find a matching face plate to cover it.  If there are no covers available, you can leave the drive in and unplugged. Make sure the floppy drive (the A drive) is disabled in BIOS and removed from the boot sequence if possible.  
+
* Remove the floppy drive if you can find a matching face plate to cover it.  If there are no covers available, you can leave the drive in, but make sure it is unplugged from the motherboard and power supply. Make sure the floppy drive (sometimes called Diskette) is disabled in BIOS and removed from the boot sequence if possible.  
 
----
 
----
−
'''Install network card (NIC)'''
+
'''Check for onboard NIC ((Network Interface Card, or ethernet.)'''
−
* Only if there's no onboard NIC (ethernet).
+
* If none can be found, install a network card.
 
----
 
----
 
'''Install hard drive'''
 
'''Install hard drive'''
−
* Get the appropriately sized (according to spec sheet) hard drive from the supply shelf.  Also check to see if you need an IDE or SATA hard drive and if you have the appropriate cables. Install hard drive and attach it to the power supply and motherboard.  
+
* Get the appropriately sized (according to spec sheet) hard drive from the supply shelf, or from an instructor.  Also check to see if you need an IDE or SATA hard drive and make sure you have the necessary cables and power connections.
−
* You will need to ask an instructor for a SATA hard drive and/or hard drives higher than 80 GB.
+
* Install the hard drive and attach it to the power supply and motherboard. (If the drive has IDE connections, make sure the jumper is set to the Master position. Ask an instructor for more info.)
 +
* You will need to ask an instructor for any high end hard drives.
 
----
 
----
 
'''Install sound card if needed'''
 
'''Install sound card if needed'''
−
* If there's onboard sound, no need to install card.
+
* If there's onboard sound, there's no need to install a sound card.
 
----
 
----
 
'''Install CD/CDRW/DVD/DVD-RW Drive(s)'''
 
'''Install CD/CDRW/DVD/DVD-RW Drive(s)'''
−
* If there are already optical drives installed in your system, take a look at their face-plates to determine their capabilities.  If the drives are within spec for the box you're building, confirm they're properly jumpered as Master/Slave, or just Master if there's only one.   
+
* If there are already optical drives installed in your system, take a look at their face-plates to determine their capabilities.  If the drives are within spec for the box you're building and have IDE connections, confirm they're properly jumpered as Master/Slave, or just Master if there's only one drive.   
−
If the the drives are outside of spec, pull them out and sort them into the appropriate boxes on the Build shelves.  Replace with appropriate drives as needed.
+
* If the the drives are outside of spec, pull them out and sort them into the appropriate boxes on the Build shelves.  Replace with appropriate drives as needed.
 
----   
 
----   
 
'''Cover open slots and bays'''
 
'''Cover open slots and bays'''
Line 67: Line 79:
 
----
 
----
  
−
==BOOT AND [[Entering BIOS|ENTER BIOS]]==
+
== BOOT AND [[Entering BIOS|ENTER BIOS]] ==
−
----
+
 
−
'''Attach monitor, keyboard, mouse, network, sound and power cords'''
 
−
----
 
 
'''Enter BIOS setup'''
 
'''Enter BIOS setup'''
−
* Turn on the computer.  The keystroke to enter setup should be displayed at bootup. If not, you have to guess. Del, Esc, F1, F2 and F10 are typical.
+
* Turn on the computer.  The keystroke to enter BIOS should be displayed on the flash screen, before bootup, as well as the Boot Menu key, if applicable. If no flash screen appears, you have to guess the BIOS keystroke. Delete, Escape, Enter, F1, F2, F9, F10, and F12 are typical.
 +
* Get into BIOS, and '''write down both the BIOS and Boot Menu keystrokes;''' this info will come in handy later.
 
----
 
----
−
'''Check date and time''' Check date and time in BIOS and change to the correct time if needed.
+
'''Check date and time'''  
 +
* Check date and time in BIOS and change to the correct time if needed.
 
----
 
----
 
'''Restore BIOS defaults'''
 
'''Restore BIOS defaults'''
Line 83: Line 95:
 
----
 
----
 
'''Set boot order'''
 
'''Set boot order'''
−
* It should be: '''1st-CD-ROM'''; '''2nd-Hard drive.  Disable other boot devices such as floppy drive or network boot from the boot sequence.
+
* It should be: '''1st-CD-ROM'''; '''2nd-Hard drive.  If possible, disable all other boot devices such as floppy drive or network boot from the boot sequence.
 
----
 
----
−
'''Make sure USB ports are enabled.'''
+
'''Where possible, edit any/all of the following settings:'''
 +
* Enable USB ports
 +
* Enable Hyper-threading
 +
* Disable Quick Boot
 +
* Disable Logo Display (Sometimes called Silent or Quiet Boot)
 +
* Disable Plug & Play OS
 +
* SATA Operation: set to RAID Autodetect/AHCI
 
----
 
----
 
'''Save and exit BIOS'''
 
'''Save and exit BIOS'''
Line 91: Line 109:
 
----
 
----
  
−
==HARDWARE AND SOFTWARE TESTING==
+
== HARDWARE AND SOFTWARE TESTING ==
 
----
 
----
 
'''Login to the system'''
 
'''Login to the system'''
 
* username will be '''Default User'''  
 
* username will be '''Default User'''  
−
*password = '''freegeek'''  
+
* password = '''freegeek'''  
 
----
 
----
 
'''Run "basiccheck"'''   
 
'''Run "basiccheck"'''   
−
* From a terminal, type "'''basiccheck'''" Read through each of the tests and verify that they pass.  
+
* From a terminal, type "'''basiccheck'''" Read through each of the tests and verify that they pass. When the last test is finished, close the terminal.
 +
* Refer to the basiccheck checklists hanging on the supply shelves to help determine whether each test passes or not.
 +
 
 +
<!------
 +
'''Learn to install a program through command line'''
 +
* Open up a terminal and type "sudo apt-get install gimp" and press "Enter." This will install the photo editing program called Gimp. You may have to type "freegeek" and press enter again for the installation to proceed.
 
----
 
----
 
'''Learn to install a program through the Graphical User Interface (GUI - the mouse)'''
 
'''Learn to install a program through the Graphical User Interface (GUI - the mouse)'''
−
* The first place to look for software to add is in the Ubuntu Software Center (Applications>Ubuntu Software Center). This gives you access to the Ubuntu supported applications plus many others. Search for "k3b" and install it.  K3b is a CD/DVD authoring program.
+
* The first place to look for software to add is in the Ubuntu Software Center ('''Menu'''>>> '''Ubuntu Software Center'''). This gives you access to the Ubuntu supported applications plus many others. Search for "k3b" and install it.  K3b is a CD/DVD authoring program.
 +
 
 +
-->
 +
----
 +
'''Test USB ports'''
 +
* Plug in a USB mouse, move the mouse and make sure the cursor moves on-screen.  Repeat with all USB ports, including front ports, if any.
 
----
 
----
−
'''Learn to install a program through command line'''
+
'''Run the Restricted Extras & DVD Codecs Installer'''
−
* Open up a terminal and type "sudo apt-get install gimp" and press "Enter." This will install the photo editing program called Gimp.
+
*Support for DVD playback, Adobe Flash, and several other features are not included in Xubuntu by default, but can be added with the following steps.
 +
* Plug in an ethernet cable from the workbench if you are not currently connected.
 +
* To Install Restricted Extras & DVD Codecs.
 +
* Navigate to '''Menu''' >> '''Other''' >> '''Install Restricted Extras & DVD Codecs'''
 +
* Answer '''Yes''' when prompted to confirm the installation and provide the default password when prompted.
 +
* Wait for the installation to complete and close the completion notification when it appears; if the notification informs you that the installation has failed then proceed to the alternate installation steps below.
 +
 
 +
'''Alternate Installation Steps'''
 +
*If for some reason the automated installer fails it can generally be corrected with the following steps.
 +
* Open a terminal window
 +
* Type '''sudo apt-get install ubuntu-restricted-extras''' and press Enter. Provide password if prompted.
 
----
 
----
 
'''Play an audio CD'''
 
'''Play an audio CD'''
 
* Do you hear what you expect?  Is it loud enough to be heard easily? Repeat for each CD-ROM drive. Repeat for additional sound ports.   
 
* Do you hear what you expect?  Is it loud enough to be heard easily? Repeat for each CD-ROM drive. Repeat for additional sound ports.   
 +
* Note if any standard sound ports do not work. These will need to be covered with electrical tape. If all onboard sound does not work, install a sound card.
 
----
 
----
 
'''Read data CD'''
 
'''Read data CD'''
 
* If your file browser sees files on the drive, the CD-ROM can read files. Repeat for each CD-ROM drive.  
 
* If your file browser sees files on the drive, the CD-ROM can read files. Repeat for each CD-ROM drive.  
 
----
 
----
−
'''Read DVD'''
+
'''If you have a DVD Drive, Read DVD'''
−
* If your file browser sees the file, the DVD-ROM can read files. If you are prompted to search for suitable plugins or codecs, '''please do not do this!''' The test still passes. Repeat for each DVD-ROM drive.
+
* Insert a video DVD (movie, TV show, etc.). A media player should open automatically and the DVD should start to play. If you are prompted to search for suitable plugins or codecs close the message and the media player, then try the Alternate Installation Steps for the Restricted Extras & DVD Codecs Installer listed above. If you still see the message then check with an instructor. Repeat for each DVD-ROM drive.
 +
*'''If you are getting multi-color lines when testing video playback, replace the hard drive.'''
 
----
 
----
−
'''Test CD Writing (CD-RW/combo drives only)'''
+
'''If you have an Optical Drive with CD-RW function, as of 12/20/13 we are no longer testing the writing & blanking'''
−
* Insert a CD-RW disc into the drive and open Brasero Disc Burning (under '''Applications >> Sound & Video'''.) Select '''Data Project''', click on the green +, then select '''examples.desktop''' and click '''Add'''. Click '''Burn''' in the lower right-hand corner. A new window will pop-up with a few options. If available, select '''Use burnproof''' and '''Burn the image directly without saving it to disc''' and click '''Burn'''. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop.
 
−
* Blank the disc using Brasero by selecting '''Tools >> Blank'''.
 
 
----
 
----
−
'''Test DVD Writing (DVD-RW drives only)'''
+
'''If you have an Optical Drive with DVD-RW function, as of 12/20/13 we are no longer testing the writing function'''
−
* Insert a DVD-RW disc into the drive and in the Brasero file browser follow the same steps as above to burn a data project. When the disc is done, verify that it contains the examples file by re-inserting the disc and seeing what pops up on the desktop.
+
<!------
−
*Blank the disc using Brasero by selecting '''Tools >> Blank'''.  
+
'''Test for booting from live CD'''
 +
* Place Live CD in drive and restart the computer. The system should boot from the live CD.  
 +
* Select language: English. Scroll down on the following screen to '''Boot to first hard drive''' and press enter. This should take you to the normal Ubuntu log-in screen.
 +
-->
 
----
 
----
 
'''Remove all CDs and DVDs from the drive(s)'''  
 
'''Remove all CDs and DVDs from the drive(s)'''  
 
----
 
----
−
'''Test USB ports'''
+
'''Reboot the system'''
−
* Plug in a USB mouse, see that the cursor moves and can interact with things.  Repeat with all USB ports, including front ports, if any.
+
* Open a terminal and type '''sudo reboot.''' Wait while it reboots, and ensure that the system powers on and offers a login screen without user intervention (e.g. requiring you to "press F1 to boot.")
−
----
+
* If it doesn't boot smoothly, double-check your boot priority options in BIOS and try again.
−
'''Test for booting from live CD'''
 
−
* Place Ubuntu live CD in drive and restart the computer. The system should boot from the live CD. Allow it to boot to the first Ubuntu installation screen. If it got to an installation screen, it works. Eject the disc and hit CTRL+ALT+DEL to restart.  
 
 
----
 
----
 
'''Run "printme" from terminal'''
 
'''Run "printme" from terminal'''
−
* From a terminal, type "'''printme'''".  A form will appear in the Firefox browser.  Check the white board for what should be recorded in the notes section, as well as anything that is special or unusual about the system, '''including how to get into BIOS (F2, etc)'''.  
+
* From a terminal, type "'''printme,'''" this will generate a questionnaire in Command Line.
 +
* Refer to your written notes for the RAM type and speed, the BIOS key and Boot Menu key, if applicable.   
 +
* '''When it asks what is notable about this system, refer to the white board for what should be included, and ask your instructor for any needed clarification.''' Press enter to create a web document.
 
----   
 
----   
 
'''Check in with Build Instructor'''  
 
'''Check in with Build Instructor'''  
−
* The Build Instructor will check the print me and edit it to sign it off.  
+
* The Build Instructor will check the printme and edit it to sign it off.
 +
* Your instructor may ask you to replace certain components, which will require re-running the "printme" form. Some changes may also need to be made in the web browser. If your instructor gives the "thumbs-up," proceed to the next step.  
 
----
 
----
−
'''Print the printme'''
+
'''Save Printme to the desktop'''
−
* Read the printme data and then click "Print. "Choose "Print to File" from the list of printers. Select "Desktop" as the folder to save it in. Name the file "Build Printme.ps" and click print.  
+
* After your Build Instructor has inspected the system, click "Print" from the printme on the web document. "Choose "Print to File" and select "Desktop" as the folder in which to save it. Name the file "Build Printme" and click print.  
 
----
 
----
−
'''Shut down system and place on proper shelf'''
+
'''Shut down system and place on QC shelf'''
−
* Use software controls for the shutdown (either "sudo halt" or the System menu at the top).  Place the system on the QC shelf in the Build room.
+
* Open a terminal and type "sudo halt -p" then press enter.  When the system has shut down, unplug all cables, double-check that the case is secured properly, and place it on the QC shelf in the Build room.
 
----
 
----
−
'''Clean up work area if it is your last build of the day'''
+
'''Clean up work area if it is your last Assembly of the day'''
−
* Please put all tools away, throw out any garbage or sticker remains, put screws in the appropriate bins, wrap cords around your keyboard and mouse and generally straighten up.  
+
* Please put all tools away, throw out any garbage or sticker remains, put screws in the appropriate bins, wrap cords around your keyboard and mouse, turn off your speakers and monitor, and generally straighten up.
−
|}
+
 
 +
== Thank You For Volunteering! ==
 +
* If you are interested in further learning opportunities after finishing the Build program, ask your instructor about '''Post-Build options!'''
 +
* We want to know what you think! Go to '''http://freegeek.limequery.com/48992/lang-en''' to fill out the '''Build Program Exit Survey.'''
  
  
 
<noinclude>[[Category:Build]]</noinclude>
 
<noinclude>[[Category:Build]]</noinclude>

Latest revision as of 14:29, 13 May 2014

deletion

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)


Link


There is a version of this checklist in Spanish for use in Spanish Build; that version is located here.

Work through every step as well as you can, and then ask a neighbor or your build instructor if you still have questions. Try and learn the reason for each of the steps: this knowledge will come in handy later when, inevitably, things aren't going as smoothly.

Use your resources! There are lots available to you - your neighbor, the Build assistants and instructors and, of course, the internet. Searching the web for answers to the challenge you are facing is one of the best ways to learn. You can also access tips and troubleshooting ideas on our wiki (http://wiki.freegeek.org) under Build tips or in our Troubleshooting Guide (http://wiki.freegeek.org/index.php/Build_Troubleshooting_Guide).

Supplies like cards, rails, hard drives, cleaning supplies, etc. can be found on the metal racks in the center of the build workshop. Here you will also find a box containing an assortment of common DDR memory.

BEFORE YOU POWER ON

Check what needs to be built on the white board

  • Head to the To Be Built Rack and scope out a system you would like to build.
  • Be sure to pay attention to the Build label. It will give you a lot of important information, like the type of video, if it did not POST, if the processor is Dual Core, etc. Make sure that the box you are about to Build is appropriate for its spec.
  • If everything looks good, Grab the system from the To Be Built Rack, take it back to your build station, and figure out how to pop it open.

Check capacitors

  • Visually inspect motherboard capacitors for bulges/leaks. If you find one, ask your instructor for a "Rejected" sticker.

Secure the case

  • Cover any open bays or slots. Replace any other missing case parts. (You can substitute a CD-ROM drive if no compatible bay cover is available. Please make sure that it works after installation.) Some cases require specific (proprietary) parts. If we don't have extras on hand, we unfortunately have to recycle them...
  • Ensure that all components are securely fastened.
  • Check for/remove any loose screws or unnecessary cables. If you're unsure of how to do this, ask an instructor.

Are there Asset tags? (identifying the last owner)? Or branded hardware tags on the faceplate (identifying original components such as RAM, HDD, Optical Drive etc)?

  • If there are, remove them.

DO NOT remove Microsoft Windows Branding (Certificates of Authenticity) FG-PDX, "uncovered electronic device" Processor/graphics tags or Green Light stickers.

Clean and vacuum out box

  • There is a vacuum available on the Build supply shelf by the cleaning supplies. The most effective way to clean out a box is to use a paint brush to kick up the dust while vacuuming.

Test battery

  • Grab a voltmeter and set it to DCV=20. Place one wand on the battery itself and one wand on a metal part of the case. The battery passes if its voltage shows as 3.0 or greater.

Install RAM

  • For DDR2, try speed 533 (PC2-4200) first. If that doesn't work, try higher speeds. Sometimes the BIOS will tell you the needed speed.
  • If your system's memory slots will not accept DDR2 memory, they will require another type. DDR3 is acceptable - ask your instructor for DDR3 RAM. DDR1 systems should be rejected and sent back to Prebuild as yellow-light systems.
    • NOTE: Usually RAM should be paired in dual channels for higher performance (i.e., 2 sticks of RAM used in specific slots, often color-coded). Make sure you try all combinations of slots if you are having trouble getting the system to recognize the RAM, and consult an Instructor if you're still having trouble.
  • Write down what type and speed of RAM you installed; this info will come in handy later.

Install video card if needed

  • You do not need to install a video card if there is functional onboard video.
  • Ask an instructor if you need a PCI-e card; AGP cards are available in the Build room.

Attach monitor, keyboard, mouse, network, sound and power cords

Initial power on

  • See if expected memory value is displayed during POST or in BIOS.

Power down

Remove floppy drive if possible

  • Remove the floppy drive if you can find a matching face plate to cover it. If there are no covers available, you can leave the drive in, but make sure it is unplugged from the motherboard and power supply. Make sure the floppy drive (sometimes called Diskette) is disabled in BIOS and removed from the boot sequence if possible.

Check for onboard NIC ((Network Interface Card, or ethernet.)

  • If none can be found, install a network card.

Install hard drive

  • Get the appropriately sized (according to spec sheet) hard drive from the supply shelf, or from an instructor. Also check to see if you need an IDE or SATA hard drive and make sure you have the necessary cables and power connections.
  • Install the hard drive and attach it to the power supply and motherboard. (If the drive has IDE connections, make sure the jumper is set to the Master position. Ask an instructor for more info.)
  • You will need to ask an instructor for any high end hard drives.

Install sound card if needed

  • If there's onboard sound, there's no need to install a sound card.

Install CD/CDRW/DVD/DVD-RW Drive(s)

  • If there are already optical drives installed in your system, take a look at their face-plates to determine their capabilities. If the drives are within spec for the box you're building and have IDE connections, confirm they're properly jumpered as Master/Slave, or just Master if there's only one drive.
  • If the the drives are outside of spec, pull them out and sort them into the appropriate boxes on the Build shelves. Replace with appropriate drives as needed.

Cover open slots and bays

  • Make sure you have coverings for all spaces that will not be filled with a card or drive. Look at similar cases for examples of what case pieces may look like. Be sure that these are screwed in tight and test them by pushing on each with your finger. If a slot cover falls out while a computer is on it can short out the motherboard.

BOOT AND ENTER BIOS

Enter BIOS setup

  • Turn on the computer. The keystroke to enter BIOS should be displayed on the flash screen, before bootup, as well as the Boot Menu key, if applicable. If no flash screen appears, you have to guess the BIOS keystroke. Delete, Escape, Enter, F1, F2, F9, F10, and F12 are typical.
  • Get into BIOS, and write down both the BIOS and Boot Menu keystrokes; this info will come in handy later.

Check date and time

  • Check date and time in BIOS and change to the correct time if needed.

Restore BIOS defaults

  • You might need to search around to find the BIOS values that need checking. While you search, enjoy the pleasure of learning about BIOS configuration!

Detect hard drive

  • Search BIOS to see if it is recognizing the hard drive.

Set boot order

  • It should be: 1st-CD-ROM; 2nd-Hard drive. If possible, disable all other boot devices such as floppy drive or network boot from the boot sequence.

Where possible, edit any/all of the following settings:

  • Enable USB ports
  • Enable Hyper-threading
  • Disable Quick Boot
  • Disable Logo Display (Sometimes called Silent or Quiet Boot)
  • Disable Plug & Play OS
  • SATA Operation: set to RAID Autodetect/AHCI

Save and exit BIOS

  • The system should reboot to the Ubuntu operating system.

HARDWARE AND SOFTWARE TESTING

Login to the system

  • username will be Default User
  • password = freegeek

Run "basiccheck"

  • From a terminal, type "basiccheck" Read through each of the tests and verify that they pass. When the last test is finished, close the terminal.
  • Refer to the basiccheck checklists hanging on the supply shelves to help determine whether each test passes or not.

Test USB ports

  • Plug in a USB mouse, move the mouse and make sure the cursor moves on-screen. Repeat with all USB ports, including front ports, if any.

Run the Restricted Extras & DVD Codecs Installer

  • Support for DVD playback, Adobe Flash, and several other features are not included in Xubuntu by default, but can be added with the following steps.
  • Plug in an ethernet cable from the workbench if you are not currently connected.
  • To Install Restricted Extras & DVD Codecs.
  • Navigate to Menu >> Other >> Install Restricted Extras & DVD Codecs
  • Answer Yes when prompted to confirm the installation and provide the default password when prompted.
  • Wait for the installation to complete and close the completion notification when it appears; if the notification informs you that the installation has failed then proceed to the alternate installation steps below.

Alternate Installation Steps

  • If for some reason the automated installer fails it can generally be corrected with the following steps.
  • Open a terminal window
  • Type sudo apt-get install ubuntu-restricted-extras and press Enter. Provide password if prompted.

Play an audio CD

  • Do you hear what you expect? Is it loud enough to be heard easily? Repeat for each CD-ROM drive. Repeat for additional sound ports.
  • Note if any standard sound ports do not work. These will need to be covered with electrical tape. If all onboard sound does not work, install a sound card.

Read data CD

  • If your file browser sees files on the drive, the CD-ROM can read files. Repeat for each CD-ROM drive.

If you have a DVD Drive, Read DVD

  • Insert a video DVD (movie, TV show, etc.). A media player should open automatically and the DVD should start to play. If you are prompted to search for suitable plugins or codecs close the message and the media player, then try the Alternate Installation Steps for the Restricted Extras & DVD Codecs Installer listed above. If you still see the message then check with an instructor. Repeat for each DVD-ROM drive.
  • If you are getting multi-color lines when testing video playback, replace the hard drive.

If you have an Optical Drive with CD-RW function, as of 12/20/13 we are no longer testing the writing & blanking

If you have an Optical Drive with DVD-RW function, as of 12/20/13 we are no longer testing the writing function

Remove all CDs and DVDs from the drive(s)

Reboot the system

  • Open a terminal and type sudo reboot. Wait while it reboots, and ensure that the system powers on and offers a login screen without user intervention (e.g. requiring you to "press F1 to boot.")
  • If it doesn't boot smoothly, double-check your boot priority options in BIOS and try again.

Run "printme" from terminal

  • From a terminal, type "printme," this will generate a questionnaire in Command Line.
  • Refer to your written notes for the RAM type and speed, the BIOS key and Boot Menu key, if applicable.
  • When it asks what is notable about this system, refer to the white board for what should be included, and ask your instructor for any needed clarification. Press enter to create a web document.

Check in with Build Instructor

  • The Build Instructor will check the printme and edit it to sign it off.
  • Your instructor may ask you to replace certain components, which will require re-running the "printme" form. Some changes may also need to be made in the web browser. If your instructor gives the "thumbs-up," proceed to the next step.

Save Printme to the desktop

  • After your Build Instructor has inspected the system, click "Print" from the printme on the web document. "Choose "Print to File" and select "Desktop" as the folder in which to save it. Name the file "Build Printme" and click print.

Shut down system and place on QC shelf

  • Open a terminal and type "sudo halt -p" then press enter. When the system has shut down, unplug all cables, double-check that the case is secured properly, and place it on the QC shelf in the Build room.

Clean up work area if it is your last Assembly of the day

  • Please put all tools away, throw out any garbage or sticker remains, put screws in the appropriate bins, wrap cords around your keyboard and mouse, turn off your speakers and monitor, and generally straighten up.

Thank You For Volunteering!

  • If you are interested in further learning opportunities after finishing the Build program, ask your instructor about Post-Build options!
  • We want to know what you think! Go to http://freegeek.limequery.com/48992/lang-en to fill out the Build Program Exit Survey.
Retrieved from "http://wiki.freegeek.org/index.php?title=Assembly_checklist&oldid=70478"