Difference between revisions of "User:Tonyr/Scratch"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
|width="50pt" align="center"|Done | |width="50pt" align="center"|Done | ||
|- | |- | ||
− | | Remove bottom cover || 4 screws (#2 Phillips): two near hinged | + | | Remove bottom cover || Flip iMac over on a soft mat; remove 4 screws (#2 Phillips): two near hinged front lifter; two underneath oval grill (which can be gently pried open with a flat tip screwdriver), the two outermost screws || |
|- | |- | ||
| Check capacitors || || | | Check capacitors || || | ||
Line 20: | Line 20: | ||
| Replace hard drive || 20GB || | | Replace hard drive || 20GB || | ||
|- | |- | ||
− | | Clean/dust inside || | + | | Clean/dust inside || If necessary || |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| Attach keyboard and mouse || || | | Attach keyboard and mouse || || | ||
Line 48: | Line 40: | ||
| Test CD/DVD data and sound || CD-RW test? || | | Test CD/DVD data and sound || CD-RW test? || | ||
|- | |- | ||
− | | Test/detect modem | + | | Test/detect modem || || |
|- | |- | ||
| For tower with Zip drive, test Zip || Format, copy to, read from || | | For tower with Zip drive, test Zip || Format, copy to, read from || | ||
Line 54: | Line 46: | ||
| Close up the box || check for loose parts and cables || | | Close up the box || check for loose parts and cables || | ||
|- | |- | ||
− | | Clean outside cover || case, monitor face | + | | Clean outside cover || case, monitor face, connector panel, keyboard, mouse || |
|} | |} | ||
Revision as of 10:47, 24 September 2007
iMac Rebuild Table
Steps | Notes | Done |
Remove bottom cover | Flip iMac over on a soft mat; remove 4 screws (#2 Phillips): two near hinged front lifter; two underneath oval grill (which can be gently pried open with a flat tip screwdriver), the two outermost screws | |
Check capacitors | ||
Remove ram | Put ram in Eval DIMM box or Advanced Test Incoming box | |
Remove hard drive | Disconnect power connector and ribbon cable; remove 4 #1 or #2 Phillips screws on top of drive cage; slide drive out; put hard drive in Eval hard drive bin | |
Remove battery | Test for 3.6v or better; replace with good battery if <= 3.6v | |
Replace ram | 256MB, 2x128MB PC-100 SDRAM | |
Replace hard drive | 20GB | |
Clean/dust inside | If necessary | |
Attach keyboard and mouse | ||
Power on | boot Finnix or Mac OS X | |
Record configuration | CPU, Mem, HD, CD, Video, extras | |
Set HW clock date/time to UTC | may not be necessary if connected to network | |
Install Ubuntu from CD | This may be removed if using pre-installed disk | |
Activate network interface | Set to DHCP | |
Update installed software | System Update Manager | |
Install gnome-ppp and ogle-gui, if necessary | modem: gnome-ppp; dvd: ogle-gui | |
Test CD/DVD data and sound | CD-RW test? | |
Test/detect modem | ||
For tower with Zip drive, test Zip | Format, copy to, read from | |
Close up the box | check for loose parts and cables | |
Clean outside cover | case, monitor face, connector panel, keyboard, mouse |
Ubuntu Installation
Steps | Notes | Done |
Attach keyboard/mouse, network cable, power cord | ||
Power on, perform network boot | At boot chime, press and hold Option+Apple+O+F; at OpenFirmware prompt, enter boot enet:0,yaboot, then press Enter. |