Difference between revisions of "Printer Evaluation 1"
| Line 4: | Line 4: | ||
==Inkjet Printers== | ==Inkjet Printers== | ||
==Laserjet Printers== | ==Laserjet Printers== | ||
| + | |match a power supply | ||
| + | |check for lose/missing vital parts | ||
| + | |check for lose/missing cosmetics. | ||
| + | |power up with paper in it | ||
| + | |check for ready status | ||
| + | |check for grinding noises | ||
| + | |||
| + | ?Apple Printers? | ||
| + | ?Cannon Wide Format? | ||
| + | |||
| + | *Okidata: all Okidata printers should be stored in their own area, no need to eval/build/triage. | ||
| + | |||
| + | Find power cord/supply. | ||
| + | |||
| + | Place some paper in it. | ||
| + | |||
| + | Turn the unit on. | ||
| + | |||
| + | Does it come up enough to say ready to print? | ||
| + | |||
| + | -Yes (ready to print) | ||
| + | |||
| + | -Did it make grinding noises? | ||
| + | |||
| + | --Yes (grinding noises) | ||
| + | --Mark with an X and strip for parts. | ||
| + | |||
| + | --No (grinding noises) | ||
| + | --Mark in a hidden place (underside) and set aside for build. | ||
| + | |||
| + | -No (not ready to print) | ||
| + | |||
| + | --Error codes on LCD: | ||
| + | --Reseat Toner, Paper Tray and check paper path for jams. Power on again | ||
| + | --Reseat Fuser (error 50) and Power on again | ||
| + | |||
| + | --No message on LCD: | ||
| + | --Reseat Network Card and power on again | ||
| + | --Reseat RAM and power on again | ||
| + | --Replace mainboard if possible and power on again | ||
| + | |||
| + | -If it still does not come up ready to print | ||
| + | --If it has a paper jam or fuser (50) error comment this and set aside for build | ||
| + | --If it has no messages on the LCD (just stars or dashes) and the mainboard was replaced (if possible) mark with an X and strip for parts. | ||
| + | |||
| + | Is it missing essential parts (paper drawer, fuser, toner, etc)? | ||
| + | |||
| + | Is it missing cosmetic parts: covers, lids? | ||
| + | |||
| + | Does it have lose parts, missing screws? | ||
| + | |||
| + | |||
| + | |||
| + | Laser Printer Reject Types: | ||
| + | |||
| + | doesn't power on at all | ||
| + | bad mainboard | ||
| + | paper jam | ||
| + | fuser error | ||
| + | missing essential parts | ||
| + | missing cosmetics | ||
| + | won't pass paper path test | ||
| + | |||
==Dot Matrix Printers== | ==Dot Matrix Printers== | ||
==Other types of printers== | ==Other types of printers== | ||
Revision as of 09:48, 26 April 2008
This is my scratch page for revising printer testing, it will be messy right now and shouldn't have anything that links to it yet - Darin
Printers
Inkjet Printers
Laserjet Printers
|match a power supply |check for lose/missing vital parts |check for lose/missing cosmetics. |power up with paper in it |check for ready status |check for grinding noises
?Apple Printers? ?Cannon Wide Format?
- Okidata: all Okidata printers should be stored in their own area, no need to eval/build/triage.
Find power cord/supply.
Place some paper in it.
Turn the unit on.
Does it come up enough to say ready to print?
-Yes (ready to print)
-Did it make grinding noises?
--Yes (grinding noises) --Mark with an X and strip for parts.
--No (grinding noises) --Mark in a hidden place (underside) and set aside for build.
-No (not ready to print)
--Error codes on LCD: --Reseat Toner, Paper Tray and check paper path for jams. Power on again --Reseat Fuser (error 50) and Power on again
--No message on LCD: --Reseat Network Card and power on again --Reseat RAM and power on again --Replace mainboard if possible and power on again
-If it still does not come up ready to print --If it has a paper jam or fuser (50) error comment this and set aside for build --If it has no messages on the LCD (just stars or dashes) and the mainboard was replaced (if possible) mark with an X and strip for parts.
Is it missing essential parts (paper drawer, fuser, toner, etc)?
Is it missing cosmetic parts: covers, lids?
Does it have lose parts, missing screws?
Laser Printer Reject Types:
doesn't power on at all bad mainboard paper jam fuser error missing essential parts missing cosmetics won't pass paper path test