Difference between revisions of "LVM for dual drive installation"
Jump to navigation
Jump to search
(New page: 1. configure BIOS for PXE boot 2. choose 10.04 install with no preconfiguration 3. for partitioning options, choose manual 4. set up the following partitions on the first drive... /...) |
|||
| Line 5: | Line 5: | ||
3. for partitioning options, choose manual | 3. for partitioning options, choose manual | ||
| − | 4. set up the following partitions on the first drive... | + | 4. set up the following partitions on the first drive (in order)... |
| − | /boot - 300MB - ext4 - | + | /boot - 300MB - ext4 - primary - at the beginning of the free space |
| − | / - 15 GB - ext4 - | + | / - 15 GB - ext4 - logical - at the beginning of the free space |
| + | /root - 1.5 GB - swap - n/a - at the end of the free space | ||
| + | /home - remaining space (ie. 23 GB for a 40 GB drive) | ||
| + | |||
| + | 5. set up the following partition on the second drive... | ||
| + | |||
| + | /home - use the entire available space (ie. 23 GB for a 40 GB drive) | ||
Revision as of 13:07, 9 September 2011
1. configure BIOS for PXE boot
2. choose 10.04 install with no preconfiguration
3. for partitioning options, choose manual
4. set up the following partitions on the first drive (in order)...
/boot - 300MB - ext4 - primary - at the beginning of the free space / - 15 GB - ext4 - logical - at the beginning of the free space /root - 1.5 GB - swap - n/a - at the end of the free space /home - remaining space (ie. 23 GB for a 40 GB drive)
5. set up the following partition on the second drive...
/home - use the entire available space (ie. 23 GB for a 40 GB drive)