Difference between revisions of "Network Testing"
Jump to navigation
Jump to search
Line 41: | Line 41: | ||
|Test Networking|| | |Test Networking|| | ||
* Plug the network device in with Das Unternet (the internet jack on the wall, labeled as such). '''NEVER PLUG A NETWORKING DEVICE INTO ANY OTHER ETHERNET CABLE!''' | * Plug the network device in with Das Unternet (the internet jack on the wall, labeled as such). '''NEVER PLUG A NETWORKING DEVICE INTO ANY OTHER ETHERNET CABLE!''' | ||
+ | ** For more information on Das Unternet troubleshooting, go to: [[Network Testing Network (Das Unternet)]] | ||
* Open up an internet browser on the testing station system. With the system mouse, click "Test Network Device" on the top bar of the browser. This page should say, "It works!" Repeat for each existing ethernet port. | * Open up an internet browser on the testing station system. With the system mouse, click "Test Network Device" on the top bar of the browser. This page should say, "It works!" Repeat for each existing ethernet port. | ||
;If it is a wireless router: | ;If it is a wireless router: |
Revision as of 14:44, 10 January 2012
Overview
Welcome to Network Testing. This is an area in Advanced Testing
STEPS | NOTES AND DETAILED INSTRUCTIONS |
Determine what kind of Network Device it is |
|
Determine if the Thrift Store wants it |
|
Pair the Network Device with Power Supply |
Somewhere on the device it should give the required voltage and amperage. Once you find a matching power supply that fits, plug in the power supply and place both the device and power supply into the blue bin for network devices to be tested. |
Check for Damage |
If it's missing parts or visibly broken, recycle it. If there's dirt or grime wipe it down with a rag and some cleaning solution. |
Check for Power On |
Grab a networking device and its attached power supply from the blue tub. Plug the device into a power source.
|
Test Networking |
|
Final Preparation |
|