Difference between revisions of "LVM: mounting LVM partitions"
Jump to navigation
Jump to search
(Created page with "Some hard drives now come configured with LVM ([https://en.wikipedia.org/wiki/Logical_Volume_Manager Logical Volume Manager]). These need to be mounted using a special process. …") |
|||
Line 27: | Line 27: | ||
Then you can run '''lvscan''' to detect the ''logical volumes''. You will see the active partitions on the disks. | Then you can run '''lvscan''' to detect the ''logical volumes''. You will see the active partitions on the disks. | ||
+ | You can also use '''lvdisplay''' which gives mor edetailed information. | ||
lvscan | lvscan |
Revision as of 13:38, 22 February 2013
Some hard drives now come configured with LVM (Logical Volume Manager). These need to be mounted using a special process.
First you need to ensure you have the relevant tools:
sudo apt-get install lvm2
Then run fdisk to make sure the drive is recognised
sudo fdisk -l
Now run pvscan to scan all for LVM physical volumes on the installed hard drives .
sudo pvscan PV /dev/sda2 VG VolGroup00 lvm2 [74.41 GB / 32.00 MB free] Total: 1 [74.41 GB] / in use: 1 [74.41 GB] / in no VG: 0 [0 ]
Next run vgscan to detect LVM logical volumes (with LVM a partition can span more than one physical disk)
vgscan Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2
Now activate these using vgchange
vgchange -a y 2 logical volume(s) in volume group "VolGroup00" now active
Then you can run lvscan to detect the logical volumes. You will see the active partitions on the disks. You can also use lvdisplay which gives mor edetailed information.
lvscan ACTIVE '/dev/VolGroup00/LogVol00' [72.44 GB] inherit ACTIVE '/dev/VolGroup00/LogVol01' [1.94 GB] inherit
You will now be able to mount the partition
mount /dev/VolGroup00/LogVol00 /mnt (often mount /dev/mapper/freegeek-root /mnt )