Difference between revisions of "Legacy Evaluation Overview"

Revision as of 17:07, 14 July 2007

This is a graph with borders and nodes. Maybe there is an Imagemap used so the nodes may be linking to some Pages.

AMD K6/2, 300 MHz processor or faster
AMD K6/3, 300 MHz processor or faster
Pentiums (note, this means Pentium I procs, not Pentium II or higher, but they are just marked "Pentium")

Ensure all major case parts are present (i.e. side and front panel)
If it's a low end job, remove hard drive
- Power up the system and ensure it POSTs. (It will likely fail to boot since there's no hard drive.)
If it's a normal job, replace hard drive(s) with a single, pre-wiped 6-8 gig drive
- pre-wiped 6-8 gig drives can be gotten from a build instructure from the TARDIS
- Power up the system and ensure it recognizes the hard drive during startup
Quickly place pulled hard drives into storage
- Storage for pulled hard drives is located between System Eval 1 and System Eval 2
Things to remove from keeper systems:
- All nonproprietary cards (AGP, PCI, ISA, etc) except the video card
- All loose cables
- CD-ROM drives marked 40x or higher on the faceplate
- All CD-RW and DVD drives
Label with processor type and speed (i.e. "K6/2 300" or "Pentium 233", etc.)

@@ Line 51: / Line 51: @@
 # Ensure all major case parts are present (i.e. side and front panel)
 # If it's a '''low end''' job, remove hard drive
+#* Power up the system and ensure it POSTs. ''(It will likely fail to boot since there's no hard drive.)''
 # If it's a '''normal''' job, replace hard drive(s) with a single, pre-wiped 6-8 gig drive
 #*''pre-wiped 6-8 gig drives can be gotten from a build instructure from the TARDIS''