Video Card Testing

These are instructions for testing video cards. PC cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor. STEPS NOTES AND DETAILED INSTRUCTIONS Check for Damage Visually inspect card for blown capacitors, missing fans, jammed fans, and missing backplates. Blown caps automatically mean the card is DOA. For missing or jammed fans, replace the fan with one located under the table. They are organized by connection type. For missing backplates, attempt to find a replacement through other failed cards. If no replacement pieces can be found, you can test the card... very carefully. Seat Card into Mobo Place The Video Card into the appropriate AGP, PCI, or PCIe slot on the motherboard. If the card has a molex connector, plug in the molex cord from the power supply. Plug In & Turn On Attach the monitor cable to the video card, if required ask for an adapter. Turn the computer on and let the program run until it tells you what the card is. Look for abnormalities on the screen. (lines on the screen, colored display, weird text, etc.) If no heat sink or fan exists, you can still turn it on for a few seconds, as long as you touch behind the GPU. If it gets too hot, kill the power. Determine Card Status Recycle in the yellow bin IF: the card does not post the card's display is unusual the card is incomplete (missing a fan or faceplate) it is an AGP that is under 64 MB Keep IF: the card posts is a PCI or PCI-Express regardless of size is an AGP 64 MB or bigger Send all cards that say Macintosh to Mac Land without testing. Salvage fans If you recycle the card, try to remove working fans and heatsinks that are unusual, are held together with screws rather than pins, or appear flashy. Look under the table for examples. Try to remove backplates for future use. Create Card Label Record what the screen says on a label. Make sure to include: Vendor, Model, and Memory. It should say something like: (GeForce4 MX 440 64 MB) or (Radeon X300 128 MB) or (Nvidia gf2 gts nv11 64 MB) or (Radeon 7000 R100 64 MB). This Label is to be placed on the Video Card. The software sometimes lies, check the list of cards if you suspect a slow read on a nice looking card may be incorrect If all else fails, find a model number on the card and search for it on Google. Power Down Turn off the computer and remove the video card. It's faster to turn off the computer with the power supply switch rather than using software controls. Put it away Bring to appropriate area determined by the type of card it is. AGP with 64-256 MB go to BUILD AGP with 512 MB or more go into the STORE BOX PCI 64 MB or more go into the STORE BOX PCI-Express go to the TARDIS Do it again! Thanks for your good work!