Difference between revisions of "Thinkpad"
(R60 GPU fix) |
(Added X61 wireless fix) |
||
Line 42: | Line 42: | ||
==Thinkpad R60== | ==Thinkpad R60== | ||
In the frame buffer environment (pre-GUI) the top portion of the screen has a stripe of garbled (red) characters. This fix worked for this chipset: | In the frame buffer environment (pre-GUI) the top portion of the screen has a stripe of garbled (red) characters. This fix worked for this chipset: | ||
− | + | ||
− | lspci -k | + | $ lspci -k | grep -A1 VGA |
− | + | 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 | |
− | 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 | + | Kernel modules: radeon |
− | + | $ sudo gedit /etc/default/grup | |
− | + | ||
− | sudo gedit /etc/default/grup | + | Edit the <code>GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"</code> to read <code>GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=0 quiet splash"</code>. |
− | |||
− | Edit the GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to read GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=0 quiet splash". | ||
Run | Run | ||
− | + | $ sudo update-grub | |
− | sudo update-grub | ||
− | |||
Reboot. Is fixed, no? | Reboot. Is fixed, no? | ||
+ | |||
+ | ==Thinkpad X61== | ||
+ | Issues getting wireless working. First thought was that the integrated Bluetooth device was having some kind of hardware conflict with the wireless card. Running <code>rfkill list</code> showed the wireless card subject to a hardware block, which usually stems from a wireless switch. However, flipping the wireless switch (physical switch immediately below the center of the palm rest, SoftKey = Fn+F2) would bring the bluetooth up and then down, but leave the wireless as it was. Turns out, the solution was a BIOS option. | ||
+ | |||
+ | These are the steps: | ||
+ | * Enter BIOS (F1 on POST) | ||
+ | * Go to '''Config -> Network''' | ||
+ | * Set the '''Wireless LAN Radio Frequency''' option to '''On''' | ||
+ | |||
+ | And you're golden. Sheesh. | ||
+ | |||
[[Category:Laptops]] | [[Category:Laptops]] |
Revision as of 22:29, 7 March 2012
General Information
Thinkpad Related Resources
- ThinkPad Troubleshooting by topic
- Linux Driver Matrix for ThinkPads
- Thinkpad_Passwords
- Disassembly Instructions for ThinkPads (Covering most models!)
Models
Thinkpad 600
- isa sound issues
modprobe cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=5 synthirq=-1 synthio=-1
Thinkpad 600e
- isa sound issues
modprobe cs4232 io=0x530 dma=1 dma2=0 irq=5
Thinnkpad T20/T21
- fan issues
YAY FIXED!
- SIMPLE
append:
acpi=force
to the grub boot options.
then:
echo 0x2f 0x07 > /proc/acpi/ibm/ecdump
typing that command and redirecting that output to the embedded control dump (ecdump) file will turn that fan on at it's maximum speed.
- Notes
this simple script found here:http://www.thinkwiki.org/wiki/ACPI_fan_control_script and take care of any unnecessary end-user interaction with the fan control. other useful information can be found their as well, about controlling the fan.
- links
http://www.thinkwiki.org
http://ibm-acpi.sourceforge.net (there is a useful chart with a bunch of ibm information and what ibm_acpi is known to support)
Thinkpad T30
RAM slot failure, it's a solder failure, usually starts in the second slot and worsens from there. http://www.thinkwiki.org/wiki/Problem_with_failing_memory_slot As-is these machines.
Thinkpad R60
In the frame buffer environment (pre-GUI) the top portion of the screen has a stripe of garbled (red) characters. This fix worked for this chipset:
$ lspci -k | grep -A1 VGA 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 Kernel modules: radeon $ sudo gedit /etc/default/grup
Edit the GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to read GRUB_CMDLINE_LINUX_DEFAULT="radeon.modeset=0 quiet splash"
.
Run
$ sudo update-grub
Reboot. Is fixed, no?
Thinkpad X61
Issues getting wireless working. First thought was that the integrated Bluetooth device was having some kind of hardware conflict with the wireless card. Running rfkill list
showed the wireless card subject to a hardware block, which usually stems from a wireless switch. However, flipping the wireless switch (physical switch immediately below the center of the palm rest, SoftKey = Fn+F2) would bring the bluetooth up and then down, but leave the wireless as it was. Turns out, the solution was a BIOS option.
These are the steps:
- Enter BIOS (F1 on POST)
- Go to Config -> Network
- Set the Wireless LAN Radio Frequency option to On
And you're golden. Sheesh.