Difference between revisions of "Ubuntu 12.04 Desktop Issues"
Sarah.walker (talk | contribs) |
|||
| Line 87: | Line 87: | ||
==Installing Xubuntu/Freegeek Desktop in a Ubuntu 12.04 system== | ==Installing Xubuntu/Freegeek Desktop in a Ubuntu 12.04 system== | ||
| − | + | To convert a system from Ubuntu 12.04 to Xubuntu 12.04 perform the following steps, noting that you will need to be connected to the internet with an ethernet (network) cable plugged into your computer. | |
| − | + | First, refer to the instructions at [[Password_reset#Ubuntu_12.04]] to reach the root prompt and remount the filesystem; do not proceed to the password reset instructions. | |
| − | + | Enter the following command to view your available network interfaces: | |
| + | ip link | ||
| + | The output should include one or more references to "eth0", "eth1", or "eth" followed by another number. Run the following command, substituting whichever was printed for "eth0": | ||
| + | dhclient eth0 | ||
| − | + | If more than one "eth#" was indicated by <code>ip link</code> then rerun the <code>dhclient</code> command for each of them to ensure that whichever network interface you are using is activated. | |
| − | |||
| + | Open the file '''/etc/apt/sources.list.d/freegeek-extras.list''' by entering the command | ||
| + | nano /etc/apt/sources.list.d/freegeek-extras.list | ||
| + | |||
| + | If there is already text in the file then use the arrow keys to navigate to the bottom and press Enter to add a new blank line. On the blank line type the following: | ||
deb http://apt.freegeek.org/ubuntu precise main | deb http://apt.freegeek.org/ubuntu precise main | ||
| + | Invoke the Save command by pressing Ctrl+O, press Enter to confirm the file name to be saved as (no need to change what is already displayed), then press Ctrl+X to close the file. | ||
| − | + | Remove Unity with the following command: | |
apt-get purge unity* | apt-get purge unity* | ||
Use <code>dpkg -l | grep unity</code> to find other packages, and PURGE them! | Use <code>dpkg -l | grep unity</code> to find other packages, and PURGE them! | ||
| + | Next run the commands: | ||
| + | sudo apt-get update | ||
| + | sudo apt-get install xubuntu-desktop freegeek-default-settings | ||
| − | + | Once this is completed, restart your system with the command | |
| − | + | reboot | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | You may be returned to the GRUB menu as your system is restarting; press enter on the default option at the top of the list to continue booting. Once you reach the login screen be sure to select Free Geek Session from the Session drop-down list before entering your password. | |
Latest revision as of 15:22, 10 January 2014
People are getting prompted to install 12.0.4.1, doing it and then either it breaks or they are totally lost.
Resolution
Broken packages
If its completely broken: it rarely is. More likely the process got interrupted and there are lots of packages in a broken state. It is both possible and desirable to fix this rather than blindly re-installing.
Boot into recovery mode(see below)
run:
sudo apt-get update && sudo apt-get upgrade
normally this will tell you what command you need to run. Normally dpkg --reconfigure -a and/orapt-get -f install. If after running these commands you get a message saying Could not perform immediate configuration on [package].Please see man 5 apt.conf under APT::Immediate-Configure for details., try running
apt-get -f install -o APT::Immediate-Configure=0
These might need to be repeated. When done run
sudo apt-get update && sudo apt-get upgrade
then
sudo apt-get update && sudo apt-get dist-upgrade
before proceeding.
Rinse, lather and repeat as necessary.
On a possibly related note:
Networking Can Not Start on Boot
Sometimes networking is broken, characterized by a message that appears on boot:
Waiting for up to 60 more seconds for network configuration...
Network interfaces are defined in /etc/udev/rules.d/70-persistent-net.rules. The system thinks it has eth0, but the network card is named eth1. You can safely rename this file and it will be recreated on boot, otherwise edit it so that network card present is name correctly. This file uses mac address to identify cards. Use ifconfig -a to identify them.
sudo dhclient eth1 will bring up networking in the mean time(and is a good test to identify this issue).
Something else to try is to edit /etc/network/interfaces. In the file, delete everything below "iface lo inet loopback" and restart the computer. Interfaces information is stored elsewhere in 12.04 and can conflict with the ones in this file.
Network Manager Does Not Start
In addition it might be necessary to move/delete /var/lib/NetworkManager/NetworkManager.state in order to get network manager to start correctly.
Dealing with Unity Interface Issues
otherwise: (Not technically broken but might as well be for the effect on users not geared up, or prepared, or warned that they will have to deal with a whole new interface).
install Mate and Gnome Classic the new Free Geek desktop (based on Xubuntu but modelled to be close to the 10.04 experience) as this is what our next distro will be based on.
You should inform the user that this is what we intend to do and explain the following.
"We will install a custom Free Geek desktop based on (X)Ubuntu 12.04 as this is what the next Free Geek distro will be based upon, and it will ensure you continue receiving updates into the future. As you are among the first users of the new system we will extend the software support on your system so that you know that we will continue to support it. With your permission we would like to contact you in future to see what your experience with the new system has been".
If they agree to this please send a note with their name, contact info and system id to paulm@freegeek.
Recovery Mode in 12.04
The recovery mode in 12.04 is a little bit different. By default it mounts the root (/) filesystem as READ ONLY. This means you will not be able to back up the password, edit files, etc.
To fix just make sure that you select the networking option from the recovery menu. This will set everything up for you.
There is a command that will remount / as "rw" (read-write):
mount -o remount,rw /
Running the upgrade script for 12.04
Boot into recovery mode into networking
do:
wget bruno/upgrade-ubuntu.sh
The script will prompt multiple times asking for permission to install certain things. Enter "yes" for all of these EXCEPT for when it asks to restart.
When it asks to restart, do
N
And enter
x
to exit.
Then, run the script one more time to install a few more things that will complete the upgrade.
Installing Xubuntu/Freegeek Desktop in a Ubuntu 12.04 system
To convert a system from Ubuntu 12.04 to Xubuntu 12.04 perform the following steps, noting that you will need to be connected to the internet with an ethernet (network) cable plugged into your computer.
First, refer to the instructions at Password_reset#Ubuntu_12.04 to reach the root prompt and remount the filesystem; do not proceed to the password reset instructions.
Enter the following command to view your available network interfaces:
ip link
The output should include one or more references to "eth0", "eth1", or "eth" followed by another number. Run the following command, substituting whichever was printed for "eth0":
dhclient eth0
If more than one "eth#" was indicated by ip link then rerun the dhclient command for each of them to ensure that whichever network interface you are using is activated.
Open the file /etc/apt/sources.list.d/freegeek-extras.list by entering the command
nano /etc/apt/sources.list.d/freegeek-extras.list
If there is already text in the file then use the arrow keys to navigate to the bottom and press Enter to add a new blank line. On the blank line type the following:
deb http://apt.freegeek.org/ubuntu precise main
Invoke the Save command by pressing Ctrl+O, press Enter to confirm the file name to be saved as (no need to change what is already displayed), then press Ctrl+X to close the file.
Remove Unity with the following command:
apt-get purge unity*
Use dpkg -l | grep unity to find other packages, and PURGE them!
Next run the commands:
sudo apt-get update sudo apt-get install xubuntu-desktop freegeek-default-settings
Once this is completed, restart your system with the command
reboot
You may be returned to the GRUB menu as your system is restarting; press enter on the default option at the top of the list to continue booting. Once you reach the login screen be sure to select Free Geek Session from the Session drop-down list before entering your password.
LightDM Wierdness
LightDM is the Display Manager "of the future..." basically its a fancy login screen that can make use of HTML (however that works). Anyway there a few things you need to do to get it working after a Lucid to Precise upgrade.
Uninstall:
sudo apt-get purge lightdm
Move this folder to the home directory or something if it exists:
sudo mv /etc/lightdm/ /root/
Install the necessary packages:
sudo apt-get install xubuntu-desktop xubuntu-default-settings lightdm-gtk-greeter lightdm
In case of problems
If you do these things an end up a a partially working system, i.e. lightdm is behaving strangely / not working, run these three commands:
sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade
and reboot!
Selecting the Default Session
You switch between sessions on the log in screen by clicking on the Ubuntu logo/circle next to the username. This is non-obvious. Once you have selected a session once it will remember your choice.
Don't forget to do this for every user.
You will need to backup the password file (cp /etc/shadow /etc/shadow.bak) so you can change the password when doing this in Tech Support. Don't forget to copy the password file back over. (You don't need to do this if you have the password).
See notes in #Recovery Mode in 12.04.
Antelope in Tech Support (on the left) has a 12.04 virtual machine with Xubuntu on it.
Using the Unity Desktop
There is a basic tutorial on how to use Unity here, if you are interested:
THE FOLLOWING IS NOW OBSOLETE
Installing Mate and Gnome Classic
Mate
sudo add-apt-repository "deb http://packages.mate-desktop.org/repo/ubuntu precise main"
sudo apt-get update
sudo apt-get install mate-archive-keyring
sudo apt-get update
sudo apt-get install mate-core mate-desktop-environment
http://mate-desktop.org/install/#ubuntu
Make sure you put a shutdown button (and a logout button), on the top panel.
On Mate make sure you put a shutdown (and optionally a logout button), on the top panel, on gnome classic put a link to firefox (and evolution) there.
Gnome Classic
sudo apt-get install gnome-session-fallback
Then put a link to firefox (and evolution) on the top panel. IIRC you need to press alt + right click to add things to the panel in Gnome Classic.
Tweaking
sudo apt-get install mate-indicator-applet mate-notification-daemon
This will allow you to add the notification icon (i.e. the envelope in 10.04) on the panel and enable popup ballon notifications in Mate.
sudo apt-get install gnome-themes-extras community-themes shimmer-themes gtk-clearlooks-gperfection2-theme mate-icon-theme-faenza
This brings in extra themes. Faenza is a well regarded square icon theme. There are lots more
aptitude search theme
System -> Preferences -> Appearance allows the user to tweak the theme, selcting custom allows you to change the icons, controls window border, fonts as well.