Troubleshooting in Build: Miscellaneous
Miscellaneous Troubleshooting
Steps |
Notes and Detailed Instructions |
When there is no Internet connection while updating software (i.e. no network connection) |
First, double check that your ethernet cable is securely plugged into both your system and the wall jack. Next, right-click the Network icon on the top panel, next to the time and date, and ensure that Networking is listed as Enabled. Then left-click the Network icon and see if an option appears under Wired Connections (it should say something like |
---|---|
"I have optical drive issues" |
In most cases, if an optical drive isn't being recognized in a system, or isn't being responsive in some way, the most expedient thing to do is shut down the system, yank out the optical drive, and replace it. If it's a rewritable drive (CD/DVD-RW), mark a small X in Sharpie on the drive and put it back into its appopriate crate. If it's just a readable drive (CD/DVD-ROM), go ahead and put it in the recycle bin underneath the workbench. If you are still having issues after having replaced the optical drive, then grab a build instructor to look over your connections and help you further troubleshoot the problem. |