Processing credit cards
Jump to navigation
Jump to search
Basic transaction
This is what should normally happen during a normal sale or donation.
- The display should say "FREE GEEK". If not, hit the CLEAR button
- Get the credit (or debit) card from the customer.
- Slide the card with its magnetic stripe to the outside (right)
- You can slide towards or away from you. It doesn't matter.
- Enter amount without decimals and then hit the blue ENTER key.
- For instance enter $15.75 as 1575 ENTER
- Double-check the amount with the database amount. They should be the same.
- Wait for system to print the credit card slip. This could take a little time.
- Use this time to ask if they want an itemized (FGdb) receipt
- Do not actually complete the sale or donation in the database until the credit card transaction has cleared.
- Do not return the card to the customer yet.
- The machine will print out a two layer slip for the customer to sign. (Don't tear it off until you see the signature line.)
- Finish FGdb transaction (and print itemized receipt if desired).
- Have the customer sign the slip.
- Compare signature to back of card.
- Give customer the card and yellow copy of the slip.
- Write the receipt number on the white copy of the slip.
- Put the white copy of slip with checks in drawer.
- Press CLEAR button to get back to main screen.
Transactions from Remit Envelope (aka over the phone)
- Call the person listed. You must reach them in person to tell them you will be processing their card.
- Ask them for their BILLING address AND the 3-digits from the back of the card (CDD)
- Verify amount they opted to donate before running the card.
- Ask them to hold, place them on hold, then run the card as follows
- Press "1" for "Sale" and follow the prompts by typing in the requested information
- full card number
- expiration date
- AVS = numbers only from street address (ex. 1731 SE 10th Ave. = 1731)
- IMPORTANT: When the receipt prints, make sure it has an approval code. This means the transaction went through.
- NOTE: You may get a message saying "AVS doesn't match" or "Zip doesn't match". This does NOT mean the card was declined. It still may have gone through. Again, check for an approval code on the receipt. The approval code is the indicator that the card was accepted & charged, even if the zip or address didn't match.
- Pick up the call and tell the person the transaction is complete. We can mail them the YELLOW copy of their receipt. Verify their mailing address, which may differ from their billing address.
- NOTE: This transaction will NOT be included in the database as is a monetary donation with no gizmos.
End of the day procedure
NOTE: This needs to be done before 8 pm. At 8pm the machine sends its daily report to the credit card company and resets its information for that day.
- Display should say "FREE GEEK". If not, hit the CLEAR button
- Hit the blue FUNCTION key
- Hit the 3 (LOCAL REVIEW) and the blue ENTER key
- Hit the 1 (PRINT) and the blue ENTER key
- Hit the 1 (DETAIL) and the blue ENTER key
- Machine will print out a report.
- Find the NET amount and record it on the end of shift form.
- Attach the report to the end of shift form.
Refunds, mistakes, and other miscellaneous transactions
- If the card does not read properly
- hit "1", enter the cc # and proceed
- If you're entering the amount and you get it wrong
- Hit the backspace key and re-enter.
- If you have completed the transaction (but it's before the end of the day)
- Use the VOID function to correct the mistake
- press 5, then the ref#, enter, amt, enter
- If there was a mistake from yesterday (or before)
- Use the RETURN function to correct the mistake
- press 3, then swipe the card or enter the card number, amt, enter
- What if paper jams? Can we reprint transactions?
- Yes. FUNCTION 6, 1 to print, enter, 0 for the last transaction or 1 for other, enter
- if other you will be prompted for the ref#
- What if card is unauthorized?
- The machine will cancel the transaction and print "CANCELED" on the slip.
- What if people want cash back?
- We cannot do this at this time, since it requires processing debit cards with PIN verification. We do not offer this service at this point, but may be able to do that in the future.
The machines
The credit card swiper
- The CLEAR button is on the top right hand side of the keypad.
- The blue button in the lower right is both the ENTER key and the FUNCTION key.
- Cards are swiped through the slot on the right hand side.
- Cards may be swiped either top to bottom or bottom to top.
- The machine needs to be plugged in to the correct phone line and power for it to work properly.
The receipt printer
- This takes 2 ply paper that will print a white and yellow copy of the credit card slips.
- There is an on/off switch to the left of the paper roll.
- The machine needs to be plugged in to power for it to work properly.
- There is a square FEED button on the right to advance the paper out.
- There are POWER and PAPER LOW indicator lights right above the FEED button.
Notes
- We are imposing a $5.00 minimum on all credit card transactions.
Tech support and troubleshooting
- If the phone line is in use you will have to wait longer. This could happen if:
- We are sending or receiving a fax
- The other till is conducting a credit card transaction
- Tech Support is testing a modem
- Talk to Richard or Michael for questions.
- Our contact is Eric Jenks, 888.249.9919 (tech support or other issues)
- Alternately, 877.564.5656 (option 1) is the number for Nationwide Payment Solutions which can also handle tech support issues 24/7.
Configuration of the trans 380
Date and time
- Press "*" and "3" together (it should say "diagnostics")
- Press the "alpha" key
- follow the prompts for year, month, day, hour, minute, second, enter after each one.
Where problems can occur
- Somewhere in our phone system (check to see if fax machine can be dialed or dial out)
- The phone line could be out (do the other phones work?)
- Something on their end, call TMC
See also
- Beancounting
- Credit card machines
- Total Merchant Concepts (our credit card processing company)